Anyone who know what those two lines should look like if I created {a
b d e g h} partitions during the installation process (the whole disk
is used for openbsd).SystemPartition=... OSLoadPartition=... It's a IBM 9GB SCSI disk in the slot next to the last one (seen from back in right direction). backside of my O2 | MOBO | heatsink | empty PCI | hdd | audio | The current lines look like: SystemPartition=pci(0)scsi(0)disk(2)rdisk(0)partition(8) OSLoadPartition=pci(0)scsi(0)disk(2)rdisk(0)partition(0) please note that it's a R12000. /bkw installation went fine I tried to reboot the system, what happens after reboot is nothing. No "boot >", but I can enter the maintaing menu. Maybe of these lines have to be changed in console(maintain menu): SystemPartition=pci(0)scsi(0)disk(2)rdisk(0)partition(8) OSLoadPartition=pci(0)scsi(0)disk(2)rdisk(0)partition(0) In case that's my problem I don't know which one to change. printenv is pasted bellow. System Maintenance Menu 1) Start System 2) Install System Software 3) Run Diagnostics 4) Recover System 5) Enter Command Monitor Option? 5 Command Monitor. Type "exit" to return to the menu. > printenv AutoLoad=Yes diskless=0 dbaud=9600 volume=80 sgilogo=y monitor=h TimeZone=PST8PDT netaddr=192.0.2.1 crt_option=1 SystemPartition=pci(0)scsi(0)disk(2)rdisk(0)partition(8) OSLoadPartition=pci(0)scsi(0)disk(2)rdisk(0)partition(0) OSLoader=boot OSLoadFilename=/bsd.rd OSLoadOptions=auto console=d ConsoleOut=serial(0) ConsoleIn=serial(0) cpufreq=270 eaddr=08:00:69:0e:9b:ab videostatus=illegal_env_var --
