On Tue, Nov 07, 2023 at 09:17:57PM -0000, Stuart Henderson wrote: > On 2023-11-07, Devin Reade <g...@gno.org> wrote: > > I recently acquired an OnLogic Helix 330 (see [1] and [2]) and booted > > the 7.4 install image via USB; no installation yet, no serial console > > configured yet, no sharable dmesg yet. > > > > I have the version with the four network interfaces, based on the > > J6426. Dropping to shell from the 7.4 install image, it looks like > > ony two of the four are detected, via em(4) as I210. Interestingly, > > it is the two on the add-on board rather than the two integrated > > ports, based on the link status in ifconfig(8). > > > > The underlying network hardware is a Maxlinear GPY115 per [3]. > > > > Booting into Debian 12, all four interfaces are detected. It looks like > > support for the GPY115 is relatively new there. > > GPY115 is a PHY, the NIC is dwqe(4), which was only recently supported > on non-ARM. Try -current before spending any more time on it.
It seems this particular PHY is not yet supported. At present we are only attaching dwqe to one of several possible MAC PCI IDs because I don't have other hardware to test on. Help towards adding support for more devices would be very welcome.
