On Mon, Mar 14, 2022 at 08:58:01PM +0100, Stefan Sperling wrote: >On Mon, Mar 14, 2022 at 02:34:29PM -0500, rea...@catastrophe.net wrote: >> Well, even after adding iwm0 I notice high latency and packet loss anywhere >> from 15-50%. This occurs randomly when the device is either 2m, 10m, or 30m >> away from the access point. I did testing to verify I'm seeing 65-80% signal >> strength during some of the testing, but there's still loss even at that >> strength. >> >> For now I'll hang an iogear GWU637 off em0 and bridge to the wireless net >> using that. Maybe things will get better with iwm(4) in the future. > >That is not expected. >The driver is working fine in general and connections should be stable. > >That said, I had a similar problem with a umb(4) device that worked >perfectly fine in a laptop, but had 20%-30% packet loss when I tried >to use it in an APU, and not just one APU but three of them (I tried >it an APU1, an APU2, and a different APU2; same issue in all of them). > >Try the card and the driver in a different device if you can, just to >check?
I tried in 2 APU4 devices and the same issue happens. Unfortunately I've got no other hardware to test with at this time.
