On Sun, Apr 04, 2021 at 09:15:14AM +0100, Mark Hesselink wrote: > Hi Theo, > > Thanks for reaching out and explaining the issue in more detail. It prompted > me to check the disklabel for the drive. If I recall correctly, the disk was > formatted using the autoformatting option supplied by the OpenBSD 6.8 > installer and has the following disklabel: > > # /dev/rsd0c: > type: SCSI > disk: SCSI disk > label: SAMSUNG MZHPV512 > duid: e4819536ae37a0af > flags: > bytes/sector: 512 > sectors/track: 63 > tracks/cylinder: 255 > sectors/cylinder: 16065 > cylinders: 62260 > total sectors: 1000215216 # total bytes: 476.9G > boundstart: 64 > boundend: 1000206900 > drivedata: 0 > > 16 partitions: > # size offset fstype [fsize bsize cpg] > a: 1.0G 64 4.2BSD 2048 16384 12960 # / > b: 8.1G 2097216 swap # none > c: 476.9G 0 unused > d: 4.0G 19164928 4.2BSD 2048 16384 12960 # /tmp > e: 19.8G 27553536 4.2BSD 2048 16384 12956 # /var > f: 6.0G 69028992 4.2BSD 2048 16384 12960 # /usr > g: 1.0G 81611904 4.2BSD 2048 16384 12960 # > /usr/X11R6 > h: 20.0G 83709056 4.2BSD 2048 16384 12960 # > /usr/local > i: 2.0G 125652096 4.2BSD 2048 16384 12960 # /usr/src > j: 6.0G 129846400 4.2BSD 2048 16384 12960 # /usr/obj > k: 300.0G 142429312 4.2BSD 4096 32768 26062 # /home > > By the looks of it, the swap partition should be sufficiently large to > support hibernate. > > I went through the following steps to highlight the issue: > > 1. Reboot machine using "doas reboot" to start the test with a clean slate. > 2. Switch to console; The machine starts xenodm at boot as the machine is > meant to be used as a workstation by my children. > 3. Login, execute "ZZZ" and wait for the machine to finish hibernating. > 4. Resume machine. > 5. OpenBSD boot(8) bootstrap program shows the standard boot prompt, i.e. it > does not detect that the machine is being resumed after it has been > hibernated.
Does it say "unhibernate detected; switching to bsd.booted" at the boot> prompt here? -ml > 6. Machine boots as if the hibernate request was never executed. During boot > OpenBSD detects a number of uncleanly unmounted filesystems as well. > > The above test sequence was executed on a fresh OpenBSD 6.9 snapshot which > was successfully installed using "sysupgrade -s": > > OpenBSD 6.9-beta (GENERIC.MP) #446: Sat Apr 3 01:48:42 MDT 2021 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8261603328 (7878MB) > avail mem = 7995830272 (7625MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (65 entries) > bios0: vendor LENOVO version "N14ET54W (1.32 )" date 03/19/2020 > bios0: LENOVO 20BTS0MX00 > acpi0 at bios0: ACPI 5.0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT > SSDT SSDT SSDT SSDT SSDT PCCT SSDT TCPA SSDT UEFI MSDM BATB FPDT UEFI > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpiec0 at acpi0 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 798.31 MHz, 06-3d-04 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 798.16 MHz, 06-3d-04 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xf8000000, bus 0-63 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG_) > acpiprt2 at acpi0: bus 3 (EXP1) > acpiprt3 at acpi0: bus 4 (EXP2) > acpiprt4 at acpi0: bus -1 (EXP3) > acpiprt5 at acpi0: bus 10 (EXP6) > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > acpicmos0 at acpi0 > acpibat0 at acpi0: BAT0 model "00HW003" serial 3800 type LiP oem "SMP" > acpiac0 at acpi0: AC unit offline > acpithinkpad0 at acpi0: version 1.0 > tpm0 at acpi0 TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "INT340F" at acpi0 not configured > acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1 > acpipwrres1 at acpi0: NVP3, resource for PEG_ > acpipwrres2 at acpi0: NVP2, resource for PEG_ > acpitz0 at acpi0: critical temperature is 128 degC > acpivideo0 at acpi0: VID_ > acpivout0 at acpivideo0: LCD0 > acpivideo1 at acpi0: VID_ > cpu0: using VERW MDS workaround (except on vmm entry) > cpu0: Enhanced SpeedStep 798 MHz: speeds: 2601, 2600, 2500, 2300, 2100, > 2000, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800, 600, 500 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi, BROADWELL, gen 8 > azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi > azalia0: No codecs found > xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, xHCI > 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address > 54:ee:75:5a:b9:cd > azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi > azalia1: codecs: Realtek ALC292 > audio0 at azalia1 > ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi > pci1 at ppb0 bus 3 > ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi > pci2 at ppb1 bus 4 > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, > msi > ppb2 at pci0 dev 28 function 5 "Intel 9 Series PCIE" rev 0xe3: msi > pci3 at ppb2 bus 10 > ahci0 at pci3 dev 0 function 0 "Samsung SM951 AHCI" rev 0x01: apic 2 int 16, > AHCI 1.3 > ahci0: port 0: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZHPV512, BXW2> > naa.5002538900000000 > sd0: 488386MB, 512 bytes/sector, 1000215216 sectors, thin > pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 > ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 > int 18 > iic0 at ichiic0 > pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300 0x330040 0xf003a3 > 0x12e800 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.01/0.01 addr 2 > uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics > Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 3 > video0 at uvideo0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (e4819536ae37a0af.a) swap on sd0b dump on sd0b > WARNING: / was not properly unmounted > inteldrm0: 1920x1080, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > iwm0: hw rev 0x210, fw ver 17.3216344376.0, address 4c:34:88:04:af:ec > > Cheers, > > Mark > > On 4/4/2021 3:23 AM, Theo de Raadt wrote: > > This is not about tpm. > > > > The tpm issues people have hit were on the resume side. > > > > Your machine is failing to commit to swap a viable resume > > signature > > > > I've read the report. But can you try it once again, from the top, just > > for me, explaining it step by step? > > > > Mark Hesselink <mhess...@alumni.caltech.edu> wrote: > > > > > Hi Ricky, > > > > > > I tested your suspend suggestion and interestingly suspend works like > > > a charm. Hibernate however still does not work. I still suspect the > > > tpm(4) driver may lack support for this particular Lenovo X1 Carbon > > > 3rd gen machine, but have no proof to conclusively claim this. > > > > > > Cheersm > > > > > > Mark > > > > > > P.S. If any OpenBSD developer is reading this email, I am more than > > > happy to try out tpm(4) patches and report back. > > > > > > On 3/23/2021 3:48 AM, Ricky Cintron wrote: > > > > Hey Mark, I don't have an X1C so I can't offer any hardware-specific > > > > advice, > > > > but I see you're using the ZZZ command to hibernate the system, yet it > > > > appears > > > > you want to suspend the system (based on wording). Have you tested zzz > > > > (lowercase) instead? Maybe your hardware/setup doesn't support > > > > hibernation. > > > > > > > > If you are indeed trying to hibernate, then I have nothing. Sorry. > > > > > > > > > > > > â€â€â€â€â€â€â€ Original Message â€â€â€â€â€â€â€ > > > > > > > > On Monday, March 22nd, 2021 at 8:20 AM, Mark Hesselink > > > > <mhess...@alumni.caltech.edu> wrote: > > > > > > > > > Hi, > > > > > > > > > > I'm sending the below bug report to misc@openbsd.org as I have > > > > > > > > > > deliberately not configured my OpenBSD workstations to be able to send > > > > > > > > > > mail -- they are mostly used by my children -- and a bug report sent > > > > > > > > > > directly to b...@openbsd.org never seems to have arrived. Hopefully > > > > > this > > > > > > > > > > email does arrive. > > > > > > > > > > Cheers, > > > > > > > > > > Mark > > > > > > > > > > ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > > > > > > > > > > > Synopsis:   Suspend/resume does not work on Lenovo X2 Carbon > > > > > > 3rd gen > > > > > laptop > > > > > > > > > > > Category:   system > > > > > > Environment: > > > > > System     : OpenBSD 6.9 > > > > > > > > > >    Details    : OpenBSD 6.9-beta (GENERIC.MP) #398: Fri > > > > > Mar 12 > > > > > > > > > > 15:01:24 MST 2021 > > > > > > > > > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > > > > > > > > >    Architecture: OpenBSD.amd64 > > > > > > > > > >    Machine    : amd64 > > > > > > > > > > > Description: > > > > > Suspend/resume unfortunately does not work on my Lenovo X1 Carbon > > > > > > > > > >    3rd gen laptop. Suspending the laptop using the ZZZ command > > > > > does > > > > > > > > > >    seem to suspend the laptop, but restarting the laptop > > > > > afterwards > > > > > > > > > >    does not result in the expected boot loader prompt of: > > > > > > > > > >    >> OpenBSD/amd64 BOOT 3.53 > > > > > > > > > > unhibernate detected: switching to /bsd.booted > > > > > > > > > >    boot> > > > > > > > > > >    Instead a standard boot prompt is presented as if the laptop > > > > > never > > > > > > > > > >    completed the suspend request, but instead was abruptly shut > > > > > down. > > > > > > > > > >    During boot the system detects that 1 or more filesystems > > > > > were not > > > > > > > > > >    cleanly unmounted as well. > > > > > > > > > >    I have tried playing around with the various TPM settings in > > > > > the > > > > > > > > > >    BIOS, i.e. disabled, hidden and enabled TPM. Neither of these > > > > > > > > > >    settings seem to have an effects on the laptop's ability to > > > > > cleanly > > > > > > > > > >    suspend/resume. > > > > > > > > > > > How-To-Repeat: > > > > > ZZZ followed by booting of the laptop. > > > > > > > > > > > Fix: > > > > > No known work around. > > > > > > > > > > dmesg: > > > > > > > > > > OpenBSD 6.9-beta (GENERIC.MP) #398: Fri Mar 12 15:01:24 MST 2021 > > > > > > > > > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > > > > > > > > > real mem = 8261603328 (7878MB) > > > > > > > > > > avail mem = 7995826176 (7625MB) > > > > > > > > > > random: good seed from bootblocks > > > > > > > > > > mpath0 at root > > > > > > > > > > scsibus0 at mpath0: 256 targets > > > > > > > > > > mainbus0 at root > > > > > > > > > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (65 entries) > > > > > > > > > > bios0: vendor LENOVO version "N14ET54W (1.32 )" date 03/19/2020 > > > > > > > > > > bios0: LENOVO 20BTS0MX00 > > > > > > > > > > acpi0 at bios0: ACPI 5.0 > > > > > > > > > > acpi0: sleep states S0 S3 S4 S5 > > > > > > > > > > acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT > > > > > > > > > > SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT TCPA SSDT UEFI MSDM BATB FPDT > > > > > UEFI > > > > > > > > > > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) > > > > > EHC1(S3) > > > > > > > > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > > > > > > > > > acpihpet0 at acpi0: 14318179 Hz > > > > > > > > > > acpiec0 at acpi0 > > > > > > > > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > > > > > > > > > cpu0 at mainbus0: apid 0 (boot processor) > > > > > > > > > > cpu0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.63 MHz, 06-3d-04 > > > > > > > > > > cpu0: > > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > > > > > > > > > cpu0: 256KB 64b/line 8-way L2 cache > > > > > > > > > > cpu0: smt 0, core 0, package 0 > > > > > > > > > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > > > > > > > > > cpu0: apic clock running at 99MHz > > > > > > > > > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > > > > > > > > > > cpu1 at mainbus0: apid 2 (application processor) > > > > > > > > > > cpu1: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.24 MHz, 06-3d-04 > > > > > > > > > > cpu1: > > > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > > > > > > > > > cpu1: 256KB 64b/line 8-way L2 cache > > > > > > > > > > cpu1: smt 0, core 1, package 0 > > > > > > > > > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins > > > > > > > > > > acpimcfg0 at acpi0 > > > > > > > > > > acpimcfg0: addr 0xf8000000, bus 0-63 > > > > > > > > > > acpiprt0 at acpi0: bus 0 (PCI0) > > > > > > > > > > acpiprt1 at acpi0: bus -1 (PEG_) > > > > > > > > > > acpiprt2 at acpi0: bus 3 (EXP1) > > > > > > > > > > acpiprt3 at acpi0: bus 4 (EXP2) > > > > > > > > > > acpiprt4 at acpi0: bus -1 (EXP3) > > > > > > > > > > acpiprt5 at acpi0: bus 10 (EXP6) > > > > > > > > > > acpibtn0 at acpi0: LID_ > > > > > > > > > > acpibtn1 at acpi0: SLPB > > > > > > > > > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > > > > > > > > > acpicmos0 at acpi0 > > > > > > > > > > acpibat0 at acpi0: BAT0 model "00HW003" serial 3800 type LiP oem > > > > > "SMP" > > > > > > > > > > acpiac0 at acpi0: AC unit online > > > > > > > > > > acpithinkpad0 at acpi0: version 1.0 > > > > > > > > > > tpm0 at acpi0 TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e > > > > > > > > > > "PNP0C14" at acpi0 not configured > > > > > > > > > > "PNP0C14" at acpi0 not configured > > > > > > > > > > "PNP0C14" at acpi0 not configured > > > > > > > > > > "INT340F" at acpi0 not configured > > > > > > > > > > acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), > > > > > > > > > > C1(1000@1 mwait.1), PSS > > > > > > > > > > acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), > > > > > > > > > > C1(1000@1 mwait.1), PSS > > > > > > > > > > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1 > > > > > > > > > > acpipwrres1 at acpi0: NVP3, resource for PEG_ > > > > > > > > > > acpipwrres2 at acpi0: NVP2, resource for PEG_ > > > > > > > > > > acpitz0 at acpi0: critical temperature is 128 degC > > > > > > > > > > acpivideo0 at acpi0: VID_ > > > > > > > > > > acpivout0 at acpivideo0: LCD0 > > > > > > > > > > acpivideo1 at acpi0: VID_ > > > > > > > > > > cpu0: using VERW MDS workaround (except on vmm entry) > > > > > > > > > > cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2601, 2600, 2500, 2300, > > > > > 2100, > > > > > > > > > > 2000, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800, 600, 500 MHz > > > > > > > > > > pci0 at mainbus0 bus 0 > > > > > > > > > > pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 > > > > > > > > > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09 > > > > > > > > > > drm0 at inteldrm0 > > > > > > > > > > inteldrm0: msi, BROADWELL, gen 8 > > > > > > > > > > azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: > > > > > msi > > > > > > > > > > azalia0: No codecs found > > > > > > > > > > xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, > > > > > > > > > > xHCI 1.0 > > > > > > > > > > usb0 at xhci0: USB revision 3.0 > > > > > > > > > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > > > > > > > > > 3.00/1.00 addr 1 > > > > > > > > > > "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured > > > > > > > > > > em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address > > > > > > > > > > 54:ee:75:5a:b9:cd > > > > > > > > > > azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: > > > > > msi > > > > > > > > > > azalia1: codecs: Realtek ALC292 > > > > > > > > > > audio0 at azalia1 > > > > > > > > > > ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi > > > > > > > > > > pci1 at ppb0 bus 3 > > > > > > > > > > ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi > > > > > > > > > > pci2 at ppb1 bus 4 > > > > > > > > > > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev > > > > > > > > > > 0x59, msi > > > > > > > > > > ppb2 at pci0 dev 28 function 5 "Intel 9 Series PCIE" rev 0xe3: msi > > > > > > > > > > pci3 at ppb2 bus 10 > > > > > > > > > > ahci0 at pci3 dev 0 function 0 "Samsung SM951 AHCI" rev 0x01: apic 2 > > > > > int > > > > > > > > > > 16, AHCI 1.3 > > > > > > > > > > ahci0: port 0: 6.0Gb/s > > > > > > > > > > scsibus1 at ahci0: 32 targets > > > > > > > > > > sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZHPV512, BXW2> > > > > > > > > > > naa.5002538900000000 > > > > > > > > > > sd0: 488386MB, 512 bytes/sector, 1000215216 sectors, thin > > > > > > > > > > pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 > > > > > > > > > > ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: > > > > > apic > > > > > > > > > > 2 int 18 > > > > > > > > > > iic0 at ichiic0 > > > > > > > > > > pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03 > > > > > > > > > > isa0 at pcib0 > > > > > > > > > > isadma0 at isa0 > > > > > > > > > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > > > > > > > > > pckbd0 at pckbc0 (kbd slot) > > > > > > > > > > wskbd0 at pckbd0: console keyboard > > > > > > > > > > pms0 at pckbc0 (aux slot) > > > > > > > > > > wsmouse0 at pms0 mux 0 > > > > > > > > > > wsmouse1 at pms0 mux 0 > > > > > > > > > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300 0x330040 > > > > > > > > > > 0xf003a3 0x12e800 > > > > > > > > > > pcppi0 at isa0 port 0x61 > > > > > > > > > > spkr0 at pcppi0 > > > > > > > > > > ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.01/0.01 addr 2 > > > > > > > > > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony > > > > > Electronics > > > > > > > > > > Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 3 > > > > > > > > > > video0 at uvideo0 > > > > > > > > > > vscsi0 at root > > > > > > > > > > scsibus2 at vscsi0: 256 targets > > > > > > > > > > softraid0 at root > > > > > > > > > > scsibus3 at softraid0: 256 targets > > > > > > > > > > root on sd0a (e4819536ae37a0af.a) swap on sd0b dump on sd0b > > > > > > > > > > WARNING: / was not properly unmounted > > > > > > > > > > inteldrm0: 1920x1080, 32bpp > > > > > > > > > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using > > > > > wskbd0 > > > > > > > > > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > > > > > > > > > iwm0: hw rev 0x210, fw ver 17.3216344376.0, address 4c:34:88:04:af:ec > > > > > > > > > > usbdevs: > > > > > > > > > > Controller /dev/usb0: > > > > > > > > > > addr 01: 8086:0000 Intel, xHCI root hub > > > > > > > > > >     super speed, self powered, config 1, rev 1.00 > > > > > > > > > >     driver: uhub0 > > > > > > > > > > addr 02: 8087:0a2a Intel, Bluetooth > > > > > > > > > >     full speed, self powered, config 1, rev 0.01 > > > > > > > > > >     driver: ugen0 > > > > > > > > > > addr 03: 04f2:b45d Chicony Electronics Co.,Ltd., Integrated Camera > > > > > > > > > >     high speed, power 500 mA, config 1, rev 0.29, iSerial > > > > > 0x0001 > > > > > > > > > >     driver: uvideo0 >
