Hey Mark, I don't have an X1C so I can't offer any hardware-specific advice, but I see you're using the ZZZ command to hibernate the system, yet it appears you want to suspend the system (based on wording). Have you tested zzz (lowercase) instead? Maybe your hardware/setup doesn't support hibernation.
If you are indeed trying to hibernate, then I have nothing. Sorry. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Monday, March 22nd, 2021 at 8:20 AM, Mark Hesselink <mhess...@alumni.caltech.edu> wrote: > Hi, > > I'm sending the below bug report to misc@openbsd.org as I have > > deliberately not configured my OpenBSD workstations to be able to send > > mail -- they are mostly used by my children -- and a bug report sent > > directly to b...@openbsd.org never seems to have arrived. Hopefully this > > email does arrive. > > Cheers, > > Mark > > ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > > > Synopsis: Suspend/resume does not work on Lenovo X2 Carbon 3rd gen > > laptop > > > Category: system > > > Environment: > > System : OpenBSD 6.9 > > Details : OpenBSD 6.9-beta (GENERIC.MP) #398: Fri Mar 12 > > 15:01:24 MST 2021 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > Architecture: OpenBSD.amd64 > > Machine : amd64 > > > Description: > > Suspend/resume unfortunately does not work on my Lenovo X1 Carbon > > 3rd gen laptop. Suspending the laptop using the ZZZ command does > > seem to suspend the laptop, but restarting the laptop afterwards > > does not result in the expected boot loader prompt of: > > >> OpenBSD/amd64 BOOT 3.53 > > unhibernate detected: switching to /bsd.booted > > boot> > > Instead a standard boot prompt is presented as if the laptop never > > completed the suspend request, but instead was abruptly shut down. > > During boot the system detects that 1 or more filesystems were not > > cleanly unmounted as well. > > I have tried playing around with the various TPM settings in the > > BIOS, i.e. disabled, hidden and enabled TPM. Neither of these > > settings seem to have an effects on the laptop's ability to cleanly > > suspend/resume. > > > How-To-Repeat: > > ZZZ followed by booting of the laptop. > > > Fix: > > No known work around. > > dmesg: > > OpenBSD 6.9-beta (GENERIC.MP) #398: Fri Mar 12 15:01:24 MST 2021 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 8261603328 (7878MB) > > avail mem = 7995826176 (7625MB) > > random: good seed from bootblocks > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (65 entries) > > bios0: vendor LENOVO version "N14ET54W (1.32 )" date 03/19/2020 > > bios0: LENOVO 20BTS0MX00 > > acpi0 at bios0: ACPI 5.0 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT > > SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT TCPA SSDT UEFI MSDM BATB FPDT UEFI > > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpihpet0 at acpi0: 14318179 Hz > > acpiec0 at acpi0 > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.63 MHz, 06-3d-04 > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 99MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > > cpu1 at mainbus0: apid 2 (application processor) > > cpu1: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.24 MHz, 06-3d-04 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 0, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xf8000000, bus 0-63 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (PEG_) > > acpiprt2 at acpi0: bus 3 (EXP1) > > acpiprt3 at acpi0: bus 4 (EXP2) > > acpiprt4 at acpi0: bus -1 (EXP3) > > acpiprt5 at acpi0: bus 10 (EXP6) > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: SLPB > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > acpicmos0 at acpi0 > > acpibat0 at acpi0: BAT0 model "00HW003" serial 3800 type LiP oem "SMP" > > acpiac0 at acpi0: AC unit online > > acpithinkpad0 at acpi0: version 1.0 > > tpm0 at acpi0 TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > "INT340F" at acpi0 not configured > > acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), > > C1(1000@1 mwait.1), PSS > > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1 > > acpipwrres1 at acpi0: NVP3, resource for PEG_ > > acpipwrres2 at acpi0: NVP2, resource for PEG_ > > acpitz0 at acpi0: critical temperature is 128 degC > > acpivideo0 at acpi0: VID_ > > acpivout0 at acpivideo0: LCD0 > > acpivideo1 at acpi0: VID_ > > cpu0: using VERW MDS workaround (except on vmm entry) > > cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2601, 2600, 2500, 2300, 2100, > > 2000, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800, 600, 500 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09 > > drm0 at inteldrm0 > > inteldrm0: msi, BROADWELL, gen 8 > > azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi > > azalia0: No codecs found > > xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, > > xHCI 1.0 > > usb0 at xhci0: USB revision 3.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 > > "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured > > em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address > > 54:ee:75:5a:b9:cd > > azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi > > azalia1: codecs: Realtek ALC292 > > audio0 at azalia1 > > ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi > > pci1 at ppb0 bus 3 > > ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi > > pci2 at ppb1 bus 4 > > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev > > 0x59, msi > > ppb2 at pci0 dev 28 function 5 "Intel 9 Series PCIE" rev 0xe3: msi > > pci3 at ppb2 bus 10 > > ahci0 at pci3 dev 0 function 0 "Samsung SM951 AHCI" rev 0x01: apic 2 int > > 16, AHCI 1.3 > > ahci0: port 0: 6.0Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZHPV512, BXW2> > > naa.5002538900000000 > > sd0: 488386MB, 512 bytes/sector, 1000215216 sectors, thin > > pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 > > ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic > > 2 int 18 > > iic0 at ichiic0 > > pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03 > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > wsmouse1 at pms0 mux 0 > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300 0x330040 > > 0xf003a3 0x12e800 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.01/0.01 addr 2 > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics > > Co.,Ltd. Integrated Camera" rev 2.00/0.29 addr 3 > > video0 at uvideo0 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on sd0a (e4819536ae37a0af.a) swap on sd0b dump on sd0b > > WARNING: / was not properly unmounted > > inteldrm0: 1920x1080, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > iwm0: hw rev 0x210, fw ver 17.3216344376.0, address 4c:34:88:04:af:ec > > usbdevs: > > Controller /dev/usb0: > > addr 01: 8086:0000 Intel, xHCI root hub > > super speed, self powered, config 1, rev 1.00 > > driver: uhub0 > > addr 02: 8087:0a2a Intel, Bluetooth > > full speed, self powered, config 1, rev 0.01 > > driver: ugen0 > > addr 03: 04f2:b45d Chicony Electronics Co.,Ltd., Integrated Camera > > high speed, power 500 mA, config 1, rev 0.29, iSerial 0x0001 > > driver: uvideo0
