Using the snapshot from 27 Feb, I was able to
initially use the DVD+-RW to install the snapshot.
Everything has been fine, but today, I thought I
would attempt to play an Audio CD in the drive. I
downloaded xmms (which looks like the old winamp),
put the cd in and issued the following command:
#mkdir /cdrom
#mount -t cd9660 -r /dev/cd0c /cdrom
This is the error that pops up in the console:
------------------------------------------------------------------------------------------
cd0(atapiscsi0:0:0): Check Condition (error 0x70)
on opcode 0x28
SENSE KEY: Illegal Request
Incorrect Length Indicator Set
INFO: 0x10 (VALID flag on)
ASC/ASCQ: Illegal Mode For This Track
------------------------------------------------------------------------------------------
So I added the following to /etc/fstab:
/dev/cd0c /cdrom cd9660 ro,noauto 0 0
and I issued the following command:
#mount /cdrom
but I still get the same error. So I rebooted the
machine to see if I'd receive any errors
concerning the drive, but I saw no errors out of
the ordinary.
I did google the error messages, as well as looked
at the FAQ, but was unable to understand why it
didn't work. The "mount" man page has what I
first put in to get this error. This is why I am
sending out for a little assistance.
Any help is appreciated. Dmesg is below...
Bryan Brake
OpenBSD 3.9-beta (GENERIC) #610: Sun Feb 26
15:48:26 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.86GHz
("GenuineIntel" 686-class) 1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 1400 MHz (1356 mV):
unknown EST cpu, no changes possible
real mem = 1073168384 (1048016K)
avail mem = 972533760 (949740K)
using 4278 buffers containing 53760000 bytes
(52500K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date
09/19/05, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @
0xfb7d0/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel
82371 ISA and IDE" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel
82915GM/PM/GMS Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82915PM/GM
PCIE" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce Go
6800" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100
emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801FB
USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB
USB" rev 0x03: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB
USB" rev 0x03: irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB
USB" rev 0x03: irq 7
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB
USB" rev 0x03: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM
Hub-to-PCI" rev 0xd3
pci2 at ppb1 bus 2
bce0 at pci2 dev 0 function 0 "Broadcom BCM4401B0"
rev 0x02: irq 9, address 00:14:22:e6:62:79
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY,
rev. 0
cbb0 at pci2 dev 1 function 0 "Ricoh 5C476
CardBus" rev 0xb3: irq 7
"Ricoh 5C552 Firewire" rev 0x08 at pci2 dev 1
function 1 not configured
vendor "Ricoh", unknown product 0x0822 (class
system unknown subclass 0x05, rev 0x17) at pci2
dev 1 function 2 not configured
iwi0 at pci2 dev 3 function 0 "Intel PRO/Wireless
2915ABG" rev 0x05: irq 10, address 00:13:ce:be:2d:fb
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline
0x0, lattimer 0x20
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB
AC97" rev 0x03: irq 11, ICH6 AC97
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit
ADC, SigmaTel 3D
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30
function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM
LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM
SATA" rev 0x03: DMA, channel 0 wired to
compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK8026GAX>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD+-RW
TS-L532B, DE03> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB
SMBus" rev 0x03: irq 10
iic0 at ichiic0
"unknown" at iic0 addr 0x18 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters
enabled
mtrr: Pentium Pro MTRR support
ugen0 at uhub1 port 1
ugen0: Dell product 0x8103, rev 2.00/24.22, addr 2
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Logitech USB RECEIVER, rev 1.10/25.10,
addr 2, iclass 3/1
ums0 at uhidev0: 16 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
