On Wed, Jul 22, 2020 at 02:20:41PM +0200, Leo Unglaub wrote:
> Hey,
> i have the following setup: I have the drive sd1 with 20GB and on there i
> have one partition "a" with the type RAID. On that raid i have used bioctl
> to create an encrypted partition. When i decrypt sd1a it becomes sd3 and on
> there i have my normal sd3a with the type FFS.
>
> It works great but now i have to grow that disk in size. I used "disklabel
> -E sd1", enlarged the boundried to the new size and then enlarged the disk.
> It worked great, disklabel -h sd1 shows already the new size. But when i
> decrypt by using "bioctl -cC -l sd1a" the new sd3 is still on the old size.
> The problem is that i cannot enlarge the boundried on that sd3 disk. Any
> ideas what i can do in this case?
Backup, recreate the RAID, restore.
THe RAID meta data includes the size and AFAIK, there is now way to
change that after creation.
-Otto
>
>
>
> Here is the disklabel from sd1, the disk with the RAID partition that i
> could resize correctly.
>
> > # disklabel sd1 # /dev/rsd1c:
> > type: SCSI
> > disk: SCSI disk
> > label: vol-vmai
> > duid: 8243870d445950cf
> > flags:
> > bytes/sector: 512
> > sectors/track: 80
> > tracks/cylinder: 16
> > sectors/cylinder: 1280
> > cylinders: 16383
> > total sectors: 419430400
> > boundstart: 128
> > boundend: 419430400
> > drivedata: 0
> >
> > 16 partitions:
> > # size offset fstype [fsize bsize cpg]
> > a: 419430272 128 RAID c:
> > 419430400 0 unused
>
> And here is the disklabel from the sd3 disk, the one that i get when i
> decrypt sd1a.
>
> > # disklabel sd3
> > # /dev/rsd3c:
> > type: SCSI
> > disk: SCSI disk
> > label: SR CRYPTO VMAIL
> > duid: f7defe201b90c524
> > flags:
> > bytes/sector: 512
> > sectors/track: 63
> > tracks/cylinder: 255
> > sectors/cylinder: 16065
> > cylinders: 1305
> > total sectors: 20969584
> > boundstart: 64
> > boundend: 20969584
> > drivedata: 0
> >
> > 16 partitions:
> > # size offset fstype [fsize bsize cpg]
> > a: 20964736 64 4.2BSD 2048 16384 12960 #
> > /var/vmail
> > c: 20969584 0 unused
>
>
> Maybe someone of you could be so kind and give me a hint into the right
> direction. That would be so nice, thanks!
>
> Greetings
> Leo
>
>
> > # dmesg
> > OpenBSD 6.7 (RAMDISK_CD) #177: Thu May 7 11:19:02 MDT 2020
> > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> > real mem = 4177383424 (3983MB)
> > avail mem = 4046757888 (3859MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf6a50 (10 entries)
> > bios0: vendor Hetzner version "20171111" date 11/11/2017
> > bios0: Hetzner vServer
> > acpi0 at bios0: ACPI 1.0
> > acpi0: tables DSDT FACP APIC
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel Xeon Processor (Skylake, IBRS), 2100.23 MHz, 06-55-04
> > cpu0:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLWB,AVX512CD,AVX512BW,AVX512VL,PKU,MD_CLEAR,IBRS,IBPB,SSBD,ARAT,XSAVEOPT,XSAVEC,XGETBV1,MELTDOWN
> > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> > 64b/line 16-way L2 cache
> > cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> > cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> > cpu0: apic clock running at 1000MHz
> > cpu at mainbus0: not configured
> > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpicpu at acpi0 not configured
> > "ACPI0006" at acpi0 not configured
> > "PNP0A03" at acpi0 not configured
> > acpicmos0 at acpi0
> > "PNP0A06" at acpi0 not configured
> > "PNP0A06" at acpi0 not configured
> > "PNP0A06" at acpi0 not configured
> > "QEMU0002" at acpi0 not configured
> > "ACPI0010" at acpi0 not configured
> > cpu0: using VERW MDS workaround
> > pvbus0 at mainbus0: KVM
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
> > "Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
> > pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel
> > 0 wired to compatibility, channel 1 wired to compatibility
> > pciide0: channel 0 disabled (no drives)
> > atapiscsi0 at pciide0 channel 1 drive 0
> > scsibus0 at atapiscsi0: 2 targets
> > cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> removable
> > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
> > "Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured
> > vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02
> > vga1: aperture needed
> > wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
> > virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
> > vio0 at virtio0: address 96:00:00:31:1f:b5
> > virtio0: msix shared
> > virtio1 at pci0 dev 4 function 0 "Qumranet Virtio SCSI" rev 0x00
> > vioscsi0 at virtio1: qsize 128
> > scsibus1 at vioscsi0: 255 targets
> > sd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU HARDDISK, 2.5+>
> > sd0: 39064MB, 512 bytes/sector, 80003072 sectors, thin
> > sd1 at scsibus1 targ 0 lun 1: <HC, Volume, 2.5+> serial.HC_Volume_4536178
> > sd1: 204800MB, 512 bytes/sector, 419430400 sectors, thin
> > virtio1: msix shared
> > virtio2 at pci0 dev 5 function 0 "Qumranet Virtio Memory Balloon" rev 0x00
> > virtio2: no matching child driver; not configured
> > virtio3 at pci0 dev 6 function 0 "Qumranet Virtio Console" rev 0x00
> > virtio3: no matching child driver; not configured
> > virtio4 at pci0 dev 7 function 0 "Qumranet Virtio SCSI" rev 0x00
> > vioscsi1 at virtio4: qsize 128
> > scsibus2 at vioscsi1: 255 targets
> > virtio4: msix shared
> > xhci0 at pci0 dev 8 function 0 vendor "Red Hat", unknown product 0x000d rev
> > 0x01: apic 0 int 11, xHCI 0.0
> > usb0 at xhci0: USB revision 3.0
> > uhub0 at usb0 configuration 1 interface 0 "Red Hat xHCI root hub" rev
> > 3.00/1.00 addr 1
> > isa0 at mainbus0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > pckbd0 at pckbc0 (kbd slot)
> > wskbd0 at pckbd0: console keyboard, using wsdisplay1
> > uhidev0 at uhub0 port 5 configuration 1 interface 0 "QEMU QEMU USB Tablet"
> > rev 2.00/0.00 addr 2
> > uhidev0: iclass 3/0
> > uhid at uhidev0 not configured
> > softraid0 at root
> > scsibus3 at softraid0: 256 targets
> > sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> > sd2: 39056MB, 512 bytes/sector, 79987043 sectors
> > root on rd0a swap on rd0b dump on rd0b
> > WARNING: CHECK AND RESET THE DATE!
> > softraid0: incorrect key or passphrase
> > sd3 at scsibus3 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006>
> > sd3: 10239MB, 512 bytes/sector, 20969584 sectors
> > syncing disks... done
> > rebooting...
> > OpenBSD 6.7 (RAMDISK_CD) #177: Thu May 7 11:19:02 MDT 2020
> > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> > real mem = 4177383424 (3983MB)
> > avail mem = 4046757888 (3859MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf6a50 (10 entries)
> > bios0: vendor Hetzner version "20171111" date 11/11/2017
> > bios0: Hetzner vServer
> > acpi0 at bios0: ACPI 1.0
> > acpi0: tables DSDT FACP APIC
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel Xeon Processor (Skylake, IBRS), 2100.20 MHz, 06-55-04
> > cpu0:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLWB,AVX512CD,AVX512BW,AVX512VL,PKU,MD_CLEAR,IBRS,IBPB,SSBD,ARAT,XSAVEOPT,XSAVEC,XGETBV1,MELTDOWN
> > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> > 64b/line 16-way L2 cache
> > cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> > cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> > cpu0: apic clock running at 1000MHz
> > cpu at mainbus0: not configured
> > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpicpu at acpi0 not configured
> > "ACPI0006" at acpi0 not configured
> > "PNP0A03" at acpi0 not configured
> > acpicmos0 at acpi0
> > "PNP0A06" at acpi0 not configured
> > "PNP0A06" at acpi0 not configured
> > "PNP0A06" at acpi0 not configured
> > "QEMU0002" at acpi0 not configured
> > "ACPI0010" at acpi0 not configured
> > cpu0: using VERW MDS workaround
> > pvbus0 at mainbus0: KVM
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
> > "Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
> > pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel
> > 0 wired to compatibility, channel 1 wired to compatibility
> > pciide0: channel 0 disabled (no drives)
> > atapiscsi0 at pciide0 channel 1 drive 0
> > scsibus0 at atapiscsi0: 2 targets
> > cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> removable
> > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
> > "Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured
> > vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02
> > vga1: aperture needed
> > wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
> > virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
> > vio0 at virtio0: address 96:00:00:31:1f:b5
> > virtio0: msix shared
> > virtio1 at pci0 dev 4 function 0 "Qumranet Virtio SCSI" rev 0x00
> > vioscsi0 at virtio1: qsize 128
> > scsibus1 at vioscsi0: 255 targets
> > sd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU HARDDISK, 2.5+>
> > sd0: 39064MB, 512 bytes/sector, 80003072 sectors, thin
> > sd1 at scsibus1 targ 0 lun 1: <HC, Volume, 2.5+> serial.HC_Volume_4536178
> > sd1: 204800MB, 512 bytes/sector, 419430400 sectors, thin
> > virtio1: msix shared
> > virtio2 at pci0 dev 5 function 0 "Qumranet Virtio Memory Balloon" rev 0x00
> > virtio2: no matching child driver; not configured
> > virtio3 at pci0 dev 6 function 0 "Qumranet Virtio Console" rev 0x00
> > virtio3: no matching child driver; not configured
> > virtio4 at pci0 dev 7 function 0 "Qumranet Virtio SCSI" rev 0x00
> > vioscsi1 at virtio4: qsize 128
> > scsibus2 at vioscsi1: 255 targets
> > virtio4: msix shared
> > xhci0 at pci0 dev 8 function 0 vendor "Red Hat", unknown product 0x000d rev
> > 0x01: apic 0 int 11, xHCI 0.0
> > usb0 at xhci0: USB revision 3.0
> > uhub0 at usb0 configuration 1 interface 0 "Red Hat xHCI root hub" rev
> > 3.00/1.00 addr 1
> > isa0 at mainbus0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > pckbd0 at pckbc0 (kbd slot)
> > wskbd0 at pckbd0: console keyboard, using wsdisplay1
> > uhidev0 at uhub0 port 5 configuration 1 interface 0 "QEMU QEMU USB Tablet"
> > rev 2.00/0.00 addr 2
> > uhidev0: iclass 3/0
> > uhid at uhidev0 not configured
> > softraid0 at root
> > scsibus3 at softraid0: 256 targets
> > sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> > sd2: 39056MB, 512 bytes/sector, 79987043 sectors
> > root on rd0a swap on rd0b dump on rd0b
> > WARNING: CHECK AND RESET THE DATE!
> > softraid0: incorrect key or passphrase
> > sd3 at scsibus3 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006>
> > sd3: 10239MB, 512 bytes/sector, 20969584 sectors
> > syncing disks... done
> > rebooting...
> > OpenBSD 6.7 (GENERIC.MP) #4: Wed Jul 15 11:16:20 MDT 2020
> >
> > r...@syspatch-67-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 4177383424 (3983MB)
> > avail mem = 4038176768 (3851MB)
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf6a50 (10 entries)
> > bios0: vendor Hetzner version "20171111" date 11/11/2017
> > bios0: Hetzner vServer
> > acpi0 at bios0: ACPI 1.0
> > acpi0: sleep states S5
> > acpi0: tables DSDT FACP APIC
> > acpi0: wakeup devices
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel Xeon Processor (Skylake, IBRS), 2100.23 MHz, 06-55-04
> > cpu0:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLWB,AVX512CD,AVX512BW,AVX512VL,PKU,MD_CLEAR,IBRS,IBPB,SSBD,ARAT,XSAVEOPT,XSAVEC,XGETBV1,MELTDOWN
> > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> > 64b/line 16-way L2 cache
> > cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> > cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> > cpu0: smt 0, core 0, package 0
> > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 999MHz
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: Intel Xeon Processor (Skylake, IBRS), 2100.00 MHz, 06-55-04
> > cpu1:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLWB,AVX512CD,AVX512BW,AVX512VL,PKU,MD_CLEAR,IBRS,IBPB,SSBD,ARAT,XSAVEOPT,XSAVEC,XGETBV1,MELTDOWN
> > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> > 64b/line 16-way L2 cache
> > cpu1: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> > cpu1: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> > cpu1: smt 0, core 1, package 0
> > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpicpu0 at acpi0: C1(@1 halt!)
> > acpicpu1 at acpi0: C1(@1 halt!)
> > "ACPI0006" at acpi0 not configured
> > acpipci0 at acpi0 PCI0: _OSC failed
> > acpicmos0 at acpi0
> > "PNP0A06" at acpi0 not configured
> > "PNP0A06" at acpi0 not configured
> > "PNP0A06" at acpi0 not configured
> > "QEMU0002" at acpi0 not configured
> > "ACPI0010" at acpi0 not configured
> > cpu0: using VERW MDS workaround
> > pvbus0 at mainbus0: KVM
> > pvclock0 at pvbus0
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
> > pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
> > pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel
> > 0 wired to compatibility, channel 1 wired to compatibility
> > pciide0: channel 0 disabled (no drives)
> > atapiscsi0 at pciide0 channel 1 drive 0
> > scsibus1 at atapiscsi0: 2 targets
> > cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> removable
> > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
> > piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 0 int
> > 9
> > iic0 at piixpm0
> > vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
> > vio0 at virtio0: address 96:00:00:31:1f:b5
> > virtio0: msix shared
> > virtio1 at pci0 dev 4 function 0 "Qumranet Virtio SCSI" rev 0x00
> > vioscsi0 at virtio1: qsize 128
> > scsibus2 at vioscsi0: 255 targets
> > sd0 at scsibus2 targ 0 lun 0: <QEMU, QEMU HARDDISK, 2.5+>
> > sd0: 39064MB, 512 bytes/sector, 80003072 sectors, thin
> > sd1 at scsibus2 targ 0 lun 1: <HC, Volume, 2.5+> serial.HC_Volume_4536178
> > sd1: 204800MB, 512 bytes/sector, 419430400 sectors, thin
> > virtio1: msix shared
> > virtio2 at pci0 dev 5 function 0 "Qumranet Virtio Memory Balloon" rev 0x00
> > viomb0 at virtio2
> > virtio2: apic 0 int 10
> > virtio3 at pci0 dev 6 function 0 "Qumranet Virtio Console" rev 0x00
> > virtio3: no matching child driver; not configured
> > virtio4 at pci0 dev 7 function 0 "Qumranet Virtio SCSI" rev 0x00
> > vioscsi1 at virtio4: qsize 128
> > scsibus3 at vioscsi1: 255 targets
> > virtio4: msix shared
> > xhci0 at pci0 dev 8 function 0 vendor "Red Hat", unknown product 0x000d rev
> > 0x01: apic 0 int 11, xHCI 0.0
> > usb0 at xhci0: USB revision 3.0
> > uhub0 at usb0 configuration 1 interface 0 "Red Hat xHCI root hub" rev
> > 3.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > pckbd0 at pckbc0 (kbd slot)
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > wsmouse0 at pms0 mux 0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > uhidev0 at uhub0 port 5 configuration 1 interface 0 "QEMU QEMU USB Tablet"
> > rev 2.00/0.00 addr 2
> > uhidev0: iclass 3/0
> > ums0 at uhidev0: 3 buttons, Z dir
> > wsmouse1 at ums0 mux 0
> > vscsi0 at root
> > scsibus4 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus5 at softraid0: 256 targets
> > sd2 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> > sd2: 39056MB, 512 bytes/sector, 79987043 sectors
> > root on sd2a (3aa1953775dc1966.a) swap on sd2b dump on sd2b
> > fd0 at fdc0 drive 1: density unknown
> > sd3 at scsibus5 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006>
> > sd3: 10239MB, 512 bytes/sector, 20969584 sectors
>
