On Sat, Jun 6, 2020 at 11:05 AM ari.openbsd <ari.open...@gmail.com> wrote:
> Hi All, > > I have problem with latest snapshot from 5 Jun > I too had a problem with yesterday's sysupgrade -s. It failed (twice) with verification errors, and I just gave up and went to bed. Today, just now, I got a clean upgrade to: OpenBSD obsd.attlocal.net GENERIC.MP#247 amd64 And pkg_add -u worked just fine too. > After sysupgrade booting looks like this: > > probing: pc0 com0 com1 mem[248K 376K 255M 1596M 344K 13M 3M 6144M] > disk: hd0 hd1 hd2 hd3 hd4* hd5* sr0 > >> OpenBSD/amd64 BOOTX64 3.51 > switching console to com0 > >> OpenBSD/amd64 BOOTX64 3.51 > boot> boot bsd > NOTE: random seed is being reused. > booting hd0a:bsd.ok: 12961096+2757640+335904+0+864256 > [807833+128+1026336+750576]=0x129c530 > entry point at 0x1001000 > > At this point booting hangs permanently > I tried to boot bsd.sp and bsd.booted with same results. > When I inserted bsd.mp from 6.7 release booting looks normal. > Also checked files form sysupgrade against SHA256 which was OK. > > Is there wa way to restore previous snapshot or > should I wait to next snapshot which maybe resolve this behavior > and in the meantime install release version. > > Regards, > Ari > > below boot process with bsd from release: > > boot> boot hd1a:/bsd > booting hd1a:/bsd: 12944712+2753552+331808+0+704512 > [804728+128+1024872+749630]=0x126dfa0 > entry point at 0x1001000 > [ using 2580384 bytes of bsd ELF symbol table ] > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2020 OpenBSD. All rights reserved. > https://www.OpenBSD.org > > OpenBSD 6.7 (GENERIC.MP) #182: Thu May 7 11:11:58 MDT 2020 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8385654784 (7997MB) > avail mem = 8118906880 (7742MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x79856000 (60 entries) > bios0: vendor American Megatrends Inc. version "5.13" date 04/27/2020 > bios0: HARDKERNEL ODROID-H2 > acpi0 at bios0: ACPI 6.1 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP FPDT FIDT MCFG DBG2 DBGP HPET LPIT APIC NPKT SSDT > SSDT SSDT SSDT SSDT SSDT SSDT SSDT UEFI SPCR BERT DMAR WDAT WSMT > acpi0: wakeup devices HDAS(S3) XHC_(S4) XDCI(S4) RP01(S4) RP02(S4) > RP03(S4) RP04(S4) RP05(S4) RP06(S4) > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 19200000 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz, 5941.75 MHz, 06-7a-01 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2 > ,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,M > PX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > cpu0: 4MB 64b/line 16-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 19MHz > cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz, 1495.87 MHz, 06-7a-01 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2 > ,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,M > PX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > cpu1: 4MB 64b/line 16-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz, 1495.87 MHz, 06-7a-01 > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2 > ,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,M > PX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > cpu2: 4MB 64b/line 16-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz, 1495.87 MHz, 06-7a-01 > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2 > ,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,M > PX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > cpu3: 4MB 64b/line 16-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (RP01) > acpiprt2 at acpi0: bus 3 (RP02) > acpiprt3 at acpi0: bus 1 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus -1 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiec0 at acpi0: not present > acpipwrres0 at acpi0: WRST > acpicpu0 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), > C1(1000@1 mwait.1@0x1), PSS > acpicpu1 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), > C1(1000@1 mwait.1@0x1), PSS > acpicpu2 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), > C1(1000@1 mwait.1@0x1), PSS > acpicpu3 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), > C1(1000@1 mwait.1@0x1), PSS > acpipwrres1 at acpi0: FN00, resource for FAN0 > acpitz0 at acpi0: critical temperature is 95 degC > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > acpicmos0 at acpi0 > acpibtn0 at acpi0: PWRB > glkgpio0 at acpi0: GPO1 uid 1 addr 0xd0c40000/0xcef irq 14, 80 pins > glkgpio1 at acpi0: GPO0 uid 2 addr 0xd0c50000/0xaff irq 14, 80 pins > glkgpio2 at acpi0: GPO2 uid 3 addr 0xd0c90000/0x7bf irq 15, 20 pins > glkgpio3 at acpi0: GPO3 uid 4 addr 0xd0c80000/0x82f irq 14, 35 pins > "INT33A1" at acpi0 not configured > "USBC000" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: Enhanced SpeedStep 5941 MHz: speeds: 1501, 1500, 1400, 1300, 1200, > 1100, 1000, 900, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Gemini Lake Host" rev 0x03 > inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 600" rev 0x03 > drm0 at inteldrm0 > inteldrm0: msi, GEMINILAKE, gen 9 > azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev 0x03: > msi > azalia0: codecs: Realtek ALC662, Intel/0x280d, using Realtek ALC662 > audio0 at azalia0 > vendor "Intel", unknown product 0x319a (class communications subclass > miscellaneous, rev 0x03) at pci0 dev 15 function 0 not configured > ahci0 at pci0 dev 18 function 0 "Intel Gemini Lake AHCI" rev 0x03: msi, > AHCI 1.3.1 > ahci0: port 0: 6.0Gb/s > ahci0: port 1: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, CT500MX500SSD1, M3CR> > naa.500a0751e1496370 > sd0: 476940MB, 512 bytes/sector, 976773168 sectors, thin > sd1 at scsibus1 targ 1 lun 0: <ATA, CT500MX500SSD1, M3CR> > naa.500a0751e20f947d > sd1: 476940MB, 512 bytes/sector, 976773168 sectors, thin > ppb0 at pci0 dev 19 function 0 "Intel Gemini Lake PCIE" rev 0xf3: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 20 function 0 "Intel Gemini Lake PCIE" rev 0xf3: msi > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G > (0x4c00), msi, address 00:1e:06:45:05:cb > rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0 > ppb2 at pci0 dev 20 function 1 "Intel Gemini Lake PCIE" rev 0xf3: msi > pci3 at ppb2 bus 3 > re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G > (0x4c00), msi, address 00:1e:06:45:05:cc > rgephy1 at re1 phy 7: RTL8251 PHY, rev. 0 > xhci0 at pci0 dev 21 function 0 "Intel Gemini Lake xHCI" rev 0x03: msi, > xHCI 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel Gemini Lake I2C" rev 0x03 at pci0 dev 23 function 0 not configured > "Intel Gemini Lake I2C" rev 0x03 at pci0 dev 23 function 1 not configured > "Intel Gemini Lake I2C" rev 0x03 at pci0 dev 23 function 2 not configured > "Intel Gemini Lake I2C" rev 0x03 at pci0 dev 23 function 3 not configured > sdhc0 at pci0 dev 28 function 0 "Intel Gemini Lake eMMC" rev 0x03: apic 1 > int 39 > sdhc0: SDHC 3.0, 200 MHz base clock > sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma > pcib0 at pci0 dev 31 function 0 "Intel Gemini Lake LPC" rev 0x03 > "Intel Gemini Lake SMBus" rev 0x03 at pci0 dev 31 function 1 not configured > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation) > efifb at mainbus0 not configured > scsibus2 at sdmmc0: 2 targets, initiator 0 > sd2 at scsibus2 targ 1 lun 0: <Samsung, DJNB4R, 0000> removable > sd2: 119276MB, 512 bytes/sector, 244277248 sectors > umass0 at uhub0 port 3 configuration 1 interface 0 "Kingston DT101 II" rev > 2.00/1a.da addr 2 > umass0: using SCSI over Bulk-Only > scsibus3 at umass0: 2 targets, initiator 0 > sd3 at scsibus3 targ 1 lun 0: <Kingston, DT101 II, 8.20> removable > serial.09511625AA41B6AC1C0C > sd3: 3821MB, 512 bytes/sector, 7825408 sectors > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > sd4 at scsibus5 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> > sd4: 476939MB, 512 bytes/sector, 976771504 sectors > root on sd3a (47b43346924a47bb.a) swap on sd3b dump on sd3b > [drm] GuC: No firmware known for this platform! > [drm] HuC: No firmware known for this platform! > drm:pid3259:csr_load_work_fn *NOTICE* Failed to load DMC firmware > i915/glk_dmc_ver1_04.bin. Disabling runtime power management. > drm:pid3259:csr_load_work_fn *NOTICE* DMC firmware homepage: > https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915inteldrm0: > 1024x768, 32bpp > wsdisplay0 at inteldrm0 mux 1 > wsdisplay0: screen 0-5 added (std, vt100 emulation) > > > > > > > -- > Best regards, > ari.openbsd > >
