Hi All,
I have problem with latest snapshot from 5 Jun
After sysupgrade booting looks like this:
probing: pc0 com0 com1 mem[248K 376K 255M 1596M 344K 13M 3M 6144M]
disk: hd0 hd1 hd2 hd3 hd4* hd5* sr0
>> OpenBSD/amd64 BOOTX64 3.51
switching console to com0
>> OpenBSD/amd64 BOOTX64 3.51
boot> boot bsd
NOTE: random seed is being reused.
booting hd0a:bsd.ok: 12961096+2757640+335904+0+864256
[807833+128+1026336+750576]=0x129c530
entry point at 0x1001000
At this point booting hangs permanently
I tried to boot bsd.sp and bsd.booted with same results.
When I inserted bsd.mp from 6.7 release booting looks normal.
Also checked files form sysupgrade against SHA256 which was OK.
Is there wa way to restore previous snapshot or
should I wait to next snapshot which maybe resolve this behavior
and in the meantime install release version.
Regards,
Ari
below boot process with bsd from release:
boot> boot hd1a:/bsd
booting hd1a:/bsd: 12944712+2753552+331808+0+704512
[804728+128+1024872+749630]=0x126dfa0
entry point at 0x1001000
[ using 2580384 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2020 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.7 (GENERIC.MP) #182: Thu May 7 11:11:58 MDT 2020
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8385654784 (7997MB)
avail mem = 8118906880 (7742MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x79856000 (60 entries)
bios0: vendor American Megatrends Inc. version "5.13" date 04/27/2020
bios0: HARDKERNEL ODROID-H2
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP FPDT FIDT MCFG DBG2 DBGP HPET LPIT APIC NPKT SSDT SSDT
SSDT SSDT SSDT SSDT SSDT SSDT UEFI SPCR BERT DMAR WDAT WSMT
acpi0: wakeup devices HDAS(S3) XHC_(S4) XDCI(S4) RP01(S4) RP02(S4) RP03(S4)
RP04(S4) RP05(S4) RP06(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz, 5941.75 MHz, 06-7a-01
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2
,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,M
PX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 19MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz, 1495.87 MHz, 06-7a-01
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2
,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,M
PX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 4MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz, 1495.87 MHz, 06-7a-01
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2
,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,M
PX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 4MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz, 1495.87 MHz, 06-7a-01
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2
,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,M
PX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 4MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus 3 (RP02)
acpiprt3 at acpi0: bus 1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiec0 at acpi0: not present
acpipwrres0 at acpi0: WRST
acpicpu0 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1
mwait.1@0x1), PSS
acpicpu1 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1
mwait.1@0x1), PSS
acpicpu2 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1
mwait.1@0x1), PSS
acpicpu3 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1
mwait.1@0x1), PSS
acpipwrres1 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 95 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
glkgpio0 at acpi0: GPO1 uid 1 addr 0xd0c40000/0xcef irq 14, 80 pins
glkgpio1 at acpi0: GPO0 uid 2 addr 0xd0c50000/0xaff irq 14, 80 pins
glkgpio2 at acpi0: GPO2 uid 3 addr 0xd0c90000/0x7bf irq 15, 20 pins
glkgpio3 at acpi0: GPO3 uid 4 addr 0xd0c80000/0x82f irq 14, 35 pins
"INT33A1" at acpi0 not configured
"USBC000" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 5941 MHz: speeds: 1501, 1500, 1400, 1300, 1200, 1100,
1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Gemini Lake Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 600" rev 0x03
drm0 at inteldrm0
inteldrm0: msi, GEMINILAKE, gen 9
azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev 0x03: msi
azalia0: codecs: Realtek ALC662, Intel/0x280d, using Realtek ALC662
audio0 at azalia0
vendor "Intel", unknown product 0x319a (class communications subclass
miscellaneous, rev 0x03) at pci0 dev 15 function 0 not configured
ahci0 at pci0 dev 18 function 0 "Intel Gemini Lake AHCI" rev 0x03: msi, AHCI
1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, CT500MX500SSD1, M3CR> naa.500a0751e1496370
sd0: 476940MB, 512 bytes/sector, 976773168 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, CT500MX500SSD1, M3CR> naa.500a0751e20f947d
sd1: 476940MB, 512 bytes/sector, 976773168 sectors, thin
ppb0 at pci0 dev 19 function 0 "Intel Gemini Lake PCIE" rev 0xf3: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 20 function 0 "Intel Gemini Lake PCIE" rev 0xf3: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00),
msi, address 00:1e:06:45:05:cb
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb2 at pci0 dev 20 function 1 "Intel Gemini Lake PCIE" rev 0xf3: msi
pci3 at ppb2 bus 3
re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00),
msi, address 00:1e:06:45:05:cc
rgephy1 at re1 phy 7: RTL8251 PHY, rev. 0
xhci0 at pci0 dev 21 function 0 "Intel Gemini Lake xHCI" rev 0x03: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Gemini Lake I2C" rev 0x03 at pci0 dev 23 function 0 not configured
"Intel Gemini Lake I2C" rev 0x03 at pci0 dev 23 function 1 not configured
"Intel Gemini Lake I2C" rev 0x03 at pci0 dev 23 function 2 not configured
"Intel Gemini Lake I2C" rev 0x03 at pci0 dev 23 function 3 not configured
sdhc0 at pci0 dev 28 function 0 "Intel Gemini Lake eMMC" rev 0x03: apic 1 int 39
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma
pcib0 at pci0 dev 31 function 0 "Intel Gemini Lake LPC" rev 0x03
"Intel Gemini Lake SMBus" rev 0x03 at pci0 dev 31 function 1 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
efifb at mainbus0 not configured
scsibus2 at sdmmc0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <Samsung, DJNB4R, 0000> removable
sd2: 119276MB, 512 bytes/sector, 244277248 sectors
umass0 at uhub0 port 3 configuration 1 interface 0 "Kingston DT101 II" rev
2.00/1a.da addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd3 at scsibus3 targ 1 lun 0: <Kingston, DT101 II, 8.20> removable
serial.09511625AA41B6AC1C0C
sd3: 3821MB, 512 bytes/sector, 7825408 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd4 at scsibus5 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd4: 476939MB, 512 bytes/sector, 976771504 sectors
root on sd3a (47b43346924a47bb.a) swap on sd3b dump on sd3b
[drm] GuC: No firmware known for this platform!
[drm] HuC: No firmware known for this platform!
drm:pid3259:csr_load_work_fn *NOTICE* Failed to load DMC firmware
i915/glk_dmc_ver1_04.bin. Disabling runtime power management.
drm:pid3259:csr_load_work_fn *NOTICE* DMC firmware homepage:
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915inteldrm0:
1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)
--
Best regards,
ari.openbsd
