On Sep 14 12:58:39, h...@stare.cz wrote:
> This is current/macppc on an old macmini - dmesg below.
> (Putting old hw to work with OpenBSD is a joy;
> plus this is my only macppc test machine.)
>
> At boot(8) time, it stops at the boot prompt saying
>
> >> OpenBSD/macppc BOOT 1.7
> /bsd.upgrade is not u+x
> /pci@f4000000/ata-6@d/disk@1:/etc/boot.conf: line too long
> boot>
> booting /pci@f4000000/ata-6@d/disk@1:/bsd/:
> /pci@f4000000/ata-6@d/disk@1:/bsd/: inappropriate file type or format
> failed(12304). will try /bsd
> boot>
> booting /pci@f4000000/ata-6@d/disk@1:/bsd/:
> /pci@f4000000/ata-6@d/disk@1:/bsd/: inappropriate file type or format
> failed(12304). will try /bsd
> Turning timeout off
> boot>
>
> Doing a manual
>
> boot> boot hd:/bsd
>
> boots just fine, and everything works.
>
> There is no /bsd.upgrade, and this is not a boot after an upgrade.
> I don't have /etc/boot.conf, so which line is too long?
> Why is /pci@f4000000/ata-6@d/disk@1:/bsd/ considered inappropriate?
>
> One thing i *suspect* is disk numbering confusion:
> I removed the builtin CD drive (because it got broken).
> Note the bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd
> at the very end of boot messages (disk@0 vs disk@1).
>
> Looking at 'devalias' in the machine's OpenFirmware,
> /pci@f4000000/ata-6@d/disk@1 is 'hd'; and 'hd:/bsd' is the default,
> so I am puzzled why that's what works as a manual command,
> but not as a default.
Actually, no; excuse my tired eyes.
In the machine's devalias,
'hd' is /pci@f4000000/ata-6@d/disk@0 and
'cd' is /pci@f4000000/ata-6@d/disk@1 .
The CD drive is not even physically there,
so hd:,ofwboot must be booting from the hd (disk@0);
but that information is somehow lost along the way
from ofwboot to boot(8), who attempts to boot disk@1:/bsd
How can I help debug this?
Jan
> I tried putting 'boot hd:/bsd' into /etc/boot.conf
> (so that I can do remote reboots), but boot(8) stops
> with the very same messages.
>
>
> Jan
>
>
> This is the current dmesg. I have had the same problem
> with previous versions - previous dmesgs are available
> at http://stare.cz/dmesg/ as apple-macmini-7447A.*
>
> [ using 1289152 bytes of bsd ELF symbol table ]
> console out [ATY,RockHopper2_A] console in [keyboard], using USB
> using parent ATY,RockHopper2Paren:: memaddr 98000000, size 8000000 : consaddr
> 9c008000 : ioaddr 90020000, size 20000: width 1920 linebytes 2048 height 1080
> depth 8
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org
>
> OpenBSD 6.6-beta (GENERIC) #0: Wed Sep 11 10:56:40 CEST 2019
> h...@ppc.stare.cz:/usr/src/sys/arch/macppc/compile/GENERIC
> real mem = 1073741824 (1024MB)
> avail mem = 1027039232 (979MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root: model PowerMac10,2
> cpu0 at mainbus0: 7447A (Revision 0x102): 1499 MHz: 512KB L2 cache
> mem0 at mainbus0
> spdmem0 at mem0: 1GB DDR SDRAM non-parity PC3200CL3.0
> memc0 at mainbus0: uni-n rev 0xd2
> "hw-clock" at memc0 not configured
> kiic0 at memc0 offset 0xf8001000
> iic0 at kiic0
> mpcpcibr0 at mainbus0 pci: uni-north
> pci0 at mpcpcibr0 bus 0
> pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
> agp at pchb0 not configured
> radeondrm0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01
> drm0 at radeondrm0
> radeondrm0: irq 48
> mpcpcibr1 at mainbus0 pci: uni-north
> pci1 at mpcpcibr1 bus 0
> macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
> openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
> macgpio0 at macobio0 offset 0x50
> "modem-reset" at macgpio0 offset 0x1d not configured
> "modem-power" at macgpio0 offset 0x1c not configured
> macgpio1 at macgpio0 offset 0x9: irq 47
> "programmer-switch" at macgpio0 offset 0x11 not configured
> "gpio5" at macgpio0 offset 0x6f not configured
> "gpio6" at macgpio0 offset 0x70 not configured
> "extint-gpio15" at macgpio0 offset 0x67 not configured
> "escc-legacy" at macobio0 offset 0x12000 not configured
> zs0 at macobio0 offset 0x13000: irq 22,23
> zstty0 at zs0 channel 0
> zstty1 at zs0 channel 1
> aoa0 at macobio0 offset 0x10000: irq 30,1,2
> "timer" at macobio0 offset 0x15000 not configured
> adb0 at macobio0 offset 0x16000
> apm0 at adb0: battery flags 0x0, 0% charged
> piic0 at adb0
> iic1 at piic0
> maxtmp0 at iic1 addr 0xc8: max6642
> kiic1 at macobio0 offset 0x18000
> iic2 at kiic1
> wdc0 at macobio0 offset 0x20000 irq 24: DMA
> audio0 at aoa0
> ohci0 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29,
> version 1.0, legacy support
> ohci1 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
> ohci2 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
> ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev 2.00/1.00
> addr 1
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00
> addr 1
> usb2 at ohci1: USB revision 1.0
> uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00
> addr 1
> usb3 at ohci2: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00
> addr 1
> mpcpcibr2 at mainbus0 pci: uni-north
> pci2 at mpcpcibr2 bus 0
> kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
> wdc1 at kauaiata0 irq 39: DMA
> wd0 at wdc1 channel 0 drive 0: <ST9160821A>
> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
> "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
> gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address
> 00:14:51:17:42:34
> bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Mitsumi Electric Hub in
> Apple Extended USB Keyboard" rev 1.10/4.10 addr 2
> uhidev0 at uhub4 port 3 configuration 1 interface 0 "Mitsumi Electric Apple
> Extended USB Keyboard" rev 1.10/4.10 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 13
> wskbd0 at ukbd0: console keyboard
> uhidev1 at uhub4 port 3 configuration 1 interface 1 "Mitsumi Electric Apple
> Extended USB Keyboard" rev 1.10/4.10 addr 3
> uhidev1: iclass 3/0, 3 report ids
> uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd
> root on wd0a (64c5f028a86139ec.a) swap on wd0b dump on wd0b
> initializing kernel modesetting (RV280 0x1002:0x5962 0x1002:0x5962 0x01).
> [drm] *ERROR* Unable to locate a BIOS ROM
> radeondrm0: 1920x1080, 32bpp
> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>
>
