This is current/macppc on an old macmini - dmesg below.
(Putting old hw to work with OpenBSD is a joy;
plus this is my only macppc test machine.)
At boot(8) time, it stops at the boot prompt saying
>> OpenBSD/macppc BOOT 1.7
/bsd.upgrade is not u+x
/pci@f4000000/ata-6@d/disk@1:/etc/boot.conf: line too long
boot>
booting /pci@f4000000/ata-6@d/disk@1:/bsd/: /pci@f4000000/ata-6@d/disk@1:/bsd/:
inappropriate file type or format
failed(12304). will try /bsd
boot>
booting /pci@f4000000/ata-6@d/disk@1:/bsd/: /pci@f4000000/ata-6@d/disk@1:/bsd/:
inappropriate file type or format
failed(12304). will try /bsd
Turning timeout off
boot>
Doing a manual
boot> boot hd:/bsd
boots just fine, and everything works.
There is no /bsd.upgrade, and this is not a boot after an upgrade.
I don't have /etc/boot.conf, so which line is too long?
Why is /pci@f4000000/ata-6@d/disk@1:/bsd/ considered inappropriate?
One thing i *suspect* is disk numbering confusion:
I removed the builtin CD drive (because it got broken).
Note the bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd
at the very end of boot messages (disk@0 vs disk@1).
Looking at 'devalias' in the machine's OpenFirmware,
/pci@f4000000/ata-6@d/disk@1 is 'hd'; and 'hd:/bsd' is the default,
so I am puzzled why that's what works as a manual command,
but not as a default.
I tried putting 'boot hd:/bsd' into /etc/boot.conf
(so that I can do remote reboots), but boot(8) stops
with the very same messages.
Jan
This is the current dmesg. I have had the same problem
with previous versions - previous dmesgs are available
at http://stare.cz/dmesg/ as apple-macmini-7447A.*
[ using 1289152 bytes of bsd ELF symbol table ]
console out [ATY,RockHopper2_A] console in [keyboard], using USB
using parent ATY,RockHopper2Paren:: memaddr 98000000, size 8000000 : consaddr
9c008000 : ioaddr 90020000, size 20000: width 1920 linebytes 2048 height 1080
depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.6-beta (GENERIC) #0: Wed Sep 11 10:56:40 CEST 2019
h...@ppc.stare.cz:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1027039232 (979MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerMac10,2
cpu0 at mainbus0: 7447A (Revision 0x102): 1499 MHz: 512KB L2 cache
mem0 at mainbus0
spdmem0 at mem0: 1GB DDR SDRAM non-parity PC3200CL3.0
memc0 at mainbus0: uni-n rev 0xd2
"hw-clock" at memc0 not configured
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
agp at pchb0 not configured
radeondrm0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01
drm0 at radeondrm0
radeondrm0: irq 48
mpcpcibr1 at mainbus0 pci: uni-north
pci1 at mpcpcibr1 bus 0
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
"modem-reset" at macgpio0 offset 0x1d not configured
"modem-power" at macgpio0 offset 0x1c not configured
macgpio1 at macgpio0 offset 0x9: irq 47
"programmer-switch" at macgpio0 offset 0x11 not configured
"gpio5" at macgpio0 offset 0x6f not configured
"gpio6" at macgpio0 offset 0x70 not configured
"extint-gpio15" at macgpio0 offset 0x67 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zs0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
aoa0 at macobio0 offset 0x10000: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000
apm0 at adb0: battery flags 0x0, 0% charged
piic0 at adb0
iic1 at piic0
maxtmp0 at iic1 addr 0xc8: max6642
kiic1 at macobio0 offset 0x18000
iic2 at kiic1
wdc0 at macobio0 offset 0x20000 irq 24: DMA
audio0 at aoa0
ohci0 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version
1.0, legacy support
ohci1 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci2 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev 2.00/1.00
addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00
addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00
addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00
addr 1
mpcpcibr2 at mainbus0 pci: uni-north
pci2 at mpcpcibr2 bus 0
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <ST9160821A>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address
00:14:51:17:42:34
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
uhub4 at uhub2 port 1 configuration 1 interface 0 "Mitsumi Electric Hub in
Apple Extended USB Keyboard" rev 1.10/4.10 addr 2
uhidev0 at uhub4 port 3 configuration 1 interface 0 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.10 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 13
wskbd0 at ukbd0: console keyboard
uhidev1 at uhub4 port 3 configuration 1 interface 1 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.10 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd
root on wd0a (64c5f028a86139ec.a) swap on wd0b dump on wd0b
initializing kernel modesetting (RV280 0x1002:0x5962 0x1002:0x5962 0x01).
[drm] *ERROR* Unable to locate a BIOS ROM
radeondrm0: 1920x1080, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
