On Fri, Oct 13, 2017 at 09:21:37PM +0200, Krzysztof Strzeszewski wrote: > Hi, > When I upgrade 6.1 to 6.2 in my futro s400 i have kernel panic. >
Try 6.1 stock kernel and see if that works. Then at least we know if we introduced a regression. Nobody knows (or cares) what NROOT is. -ml > ---------------------------------------------------- > > http://wklej.org/hash/e590382de31/ > > boot> > booting hd0a:/bsd: 8154312+2282500+166852+0+1097728 > [680614+82+489520+501323]=0xcc233c > entry point at 0x2000d4 > > [ using 1671996 bytes of bsd ELF symbol table ] > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2017 OpenBSD. All rights reserved. > https://www.OpenBSD.org > > OpenBSD 6.2 (GENERIC) #163: Tue Oct 3 19:51:20 MDT 2017 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 > cache) 1.01 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,MPC,MMXX,3DNOW2,3DNOW > real mem = 1039613952 (991MB) > avail mem = 1005654016 (959MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 02/14/07, BIOS32 rev. 0 @ 0xfaa30, SMBIOS rev. > 2.2 @ 0xf0000 (31 entries) > bios0: vendor Phoenix Technologies, LTD version "6.00PG Rev. 4.00.0H" > date 02/14/2007 > bios0: FUJITSU SIEMENS FUTRO S400 > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S1 S4 S5 > acpi0: tables DSDT FACP SSDT > acpi0: wakeup devices USB0(S5) USB1(S5) USB2(S5) USB3(S5) AMR0(S4) > UAR1(S5) PCI0(S5) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpiprt0 at acpi0: bus 0 (PCI0) > acpicpu0 at acpi0: C1(@1 halt!), PSS > acpitz0 at acpi0: critical temperature is 100 degC > acpibtn0 at acpi0: PWRB > "PNP0401" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000! 0xd0000/0x1000 > cpu0 at mainbus0: (uniprocessor) > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > uvm_fault(0xd0c589b0, 0xd0f32000, 0, 1) -> e > kernel: page fault trap, code=0 > Stopped at memcmp+0x11: repe cmpsl (%esi),%es:(%edi) > ddb> > ---------------------------------------------------- > > > > > ---------------------------------------------------- > > http://wklej.org/hash/e590382de31/ > > # dmesg > OpenBSD 6.1-stable (NROOT) #12: Fri Oct 13 17:15:13 CEST 2017 > krz...@nroot.pl:/usr/src/sys/arch/i386/compile/NROOT > cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 > cache) 1.01 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,MPC,MMXX,3DNOW2,3DNOW > real mem = 1039613952 (991MB) > avail mem = 1006993408 (960MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 05/14/08, BIOS32 rev. 0 @ 0xfaa30, SMBIOS rev. > 2.2 @ 0xf0000 (31 entries) > bios0: vendor Phoenix Technologies, LTD version "6.00PG Rev. 4.00.0Q" > date 05/14/2008 > bios0: FUJITSU SIEMENS FUTRO S400 > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S1 S4 S5 > acpi0: tables DSDT FACP SSDT > acpi0: wakeup devices USB0(S5) USB1(S5) USB2(S5) USB3(S5) AMR0(S4) PCI0(S5) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpiprt0 at acpi0: bus 0 (PCI0) > acpicpu0 at acpi0: C1(@1 halt!), PSS > acpitz0 at acpi0: critical temperature is 100 degC > acpibtn0 at acpi0: PWRB > "PNP0C0B" at acpi0 not configured > bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000! 0xd0000/0x1800 > 0xd2000/0x1000 > cpu0 at mainbus0: (uniprocessor) > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: PowerNow! K7 1001 MHz: speeds: 1000 800 667 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03 > sisagp0 at pchb0 > agp0 at sisagp0: aperture at 0xe8000000, size 0x4000000 > ppb0 at pci0 dev 1 function 0 "SiS 86C202 AGP" rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25 > pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 741: DMA, > channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <ST960815A> > wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 4, > version 1.0, legacy support > ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 3, > version 1.0, legacy support > ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 7 > ehci0: timed out waiting for BIOS > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "SiS EHCI root hub" rev > 2.00/1.00 addr 1 > em0 at pci0 dev 7 function 0 "Intel 82546EB" rev 0x01: irq 10, address > 00:11:0a:5b:69:e8 > em1 at pci0 dev 7 function 1 "Intel 82546EB" rev 0x01: irq 11, address > 00:11:0a:5b:69:e9 > re0 at pci0 dev 9 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB > (0x1000), irq 15, address 00:90:dc:06:37:7d > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 3 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12 > lm1 at wbsio0 port 0x290/8: W83697HF > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 configuration 1 interface 0 "SiS OHCI root hub" rev > 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "SiS OHCI root hub" rev > 1.00/1.00 addr 1 > ugen0 at uhub2 port 2 "American Power Conversion Smart-UPS 1000 > FW:652.13.I USB FW:7.3" rev 1.10/0.06 addr 2 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (e4841d70f709bc69.a) swap on wd0b dump on wd0b > acpitz0: _AL0[0] _PR0 failed > # > ---------------------------------------------------- > > > Regards, > Krzych >
