Hi, When I upgrade 6.1 to 6.2 in my futro s400 i have kernel panic.
---------------------------------------------------- http://wklej.org/hash/e590382de31/ boot> booting hd0a:/bsd: 8154312+2282500+166852+0+1097728 [680614+82+489520+501323]=0xcc233c entry point at 0x2000d4 [ using 1671996 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2017 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.2 (GENERIC) #163: Tue Oct 3 19:51:20 MDT 2017 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache) 1.01 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,MPC,MMXX,3DNOW2,3DNOW real mem = 1039613952 (991MB) avail mem = 1005654016 (959MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 02/14/07, BIOS32 rev. 0 @ 0xfaa30, SMBIOS rev. 2.2 @ 0xf0000 (31 entries) bios0: vendor Phoenix Technologies, LTD version "6.00PG Rev. 4.00.0H" date 02/14/2007 bios0: FUJITSU SIEMENS FUTRO S400 acpi0 at bios0: rev 0 acpi0: sleep states S0 S1 S4 S5 acpi0: tables DSDT FACP SSDT acpi0: wakeup devices USB0(S5) USB1(S5) USB2(S5) USB3(S5) AMR0(S4) UAR1(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C1(@1 halt!), PSS acpitz0 at acpi0: critical temperature is 100 degC acpibtn0 at acpi0: PWRB "PNP0401" at acpi0 not configured "PNP0C0B" at acpi0 not configured bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000! 0xd0000/0x1000 cpu0 at mainbus0: (uniprocessor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges uvm_fault(0xd0c589b0, 0xd0f32000, 0, 1) -> e kernel: page fault trap, code=0 Stopped at memcmp+0x11: repe cmpsl (%esi),%es:(%edi) ddb> ---------------------------------------------------- ---------------------------------------------------- http://wklej.org/hash/e590382de31/ # dmesg OpenBSD 6.1-stable (NROOT) #12: Fri Oct 13 17:15:13 CEST 2017 krz...@nroot.pl:/usr/src/sys/arch/i386/compile/NROOT cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache) 1.01 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,MPC,MMXX,3DNOW2,3DNOW real mem = 1039613952 (991MB) avail mem = 1006993408 (960MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 05/14/08, BIOS32 rev. 0 @ 0xfaa30, SMBIOS rev. 2.2 @ 0xf0000 (31 entries) bios0: vendor Phoenix Technologies, LTD version "6.00PG Rev. 4.00.0Q" date 05/14/2008 bios0: FUJITSU SIEMENS FUTRO S400 acpi0 at bios0: rev 0 acpi0: sleep states S0 S1 S4 S5 acpi0: tables DSDT FACP SSDT acpi0: wakeup devices USB0(S5) USB1(S5) USB2(S5) USB3(S5) AMR0(S4) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C1(@1 halt!), PSS acpitz0 at acpi0: critical temperature is 100 degC acpibtn0 at acpi0: PWRB "PNP0C0B" at acpi0 not configured bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000! 0xd0000/0x1800 0xd2000/0x1000 cpu0 at mainbus0: (uniprocessor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: PowerNow! K7 1001 MHz: speeds: 1000 800 667 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03 sisagp0 at pchb0 agp0 at sisagp0: aperture at 0xe8000000, size 0x4000000 ppb0 at pci0 dev 1 function 0 "SiS 86C202 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25 pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 741: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <ST960815A> wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 4, version 1.0, legacy support ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 3, version 1.0, legacy support ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 7 ehci0: timed out waiting for BIOS usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "SiS EHCI root hub" rev 2.00/1.00 addr 1 em0 at pci0 dev 7 function 0 "Intel 82546EB" rev 0x01: irq 10, address 00:11:0a:5b:69:e8 em1 at pci0 dev 7 function 1 "Intel 82546EB" rev 0x01: irq 11, address 00:11:0a:5b:69:e9 re0 at pci0 dev 9 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB (0x1000), irq 15, address 00:90:dc:06:37:7d rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 3 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12 lm1 at wbsio0 port 0x290/8: W83697HF npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "SiS OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "SiS OHCI root hub" rev 1.00/1.00 addr 1 ugen0 at uhub2 port 2 "American Power Conversion Smart-UPS 1000 FW:652.13.I USB FW:7.3" rev 1.10/0.06 addr 2 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (e4841d70f709bc69.a) swap on wd0b dump on wd0b acpitz0: _AL0[0] _PR0 failed # ---------------------------------------------------- Regards, Krzych
