And when I try atactl: # atactl wd0c readattr Attributes table revision: 4 ID Attribute name Threshold Value Raw 1 Raw Read Error Rate 102 253 0x000000000000 2 Throughput Performance 127 253 0x000000000000 3 Spin Up Time 67 253 0x000000000000 4 Start/Stop Count 127 253 0x000000000000 5 Reallocated Sector Count 127 253 0x000000000000 6 Unknown 127 253 0x000000000000 7 Seek Error Rate 127 253 0x000000000000 8 Seek Time Performance 127 253 0x000000000000 9 Power-on Hours Count 127 253 0x000000000000
There is no Temperature here, it means that my hard disk do not support this feature?! Or I made something wrong?! 2006/1/16, Ricardo Lucas <[EMAIL PROTECTED]>: > > Look at this, it's look a kind of weird: > > > hw.sensors.0=lm0, IN0, volts_dc, 2.26 V > hw.sensors.1=lm0, IN1, volts_dc, 3.94 V > hw.sensors.2=lm0, IN2, volts_dc, 2.93 V > hw.sensors.3=lm0, IN3, volts_dc, 4.67 V > hw.sensors.4=lm0, IN4, volts_dc, 0.00 V > hw.sensors.5=lm0, IN5, volts_dc, 0.00 V > hw.sensors.6=lm0, IN6, volts_dc, 0.00 V > hw.sensors.7=lm0, Temp, temp, 4.00 degC / 39.20 degF > hw.sensors.8=lm0, Fan1, fanrpm, 4856 RPM > hw.sensors.9=lm0, Fan2, fanrpm, 29347 RPM > hw.sensors.10=lm0, Fan3, fanrpm, 0 RPM > > Yesterday was something like this: > > hw.sensors.0=lm0, IN0, volts_dc, 2.26 V > hw.sensors.1=lm0, IN1, volts_dc, 3.94 V > hw.sensors.2=lm0, IN2, volts_dc, 2.93 V > hw.sensors.3=lm0, IN3, volts_dc, 4.67 V > hw.sensors.4=lm0, IN4, volts_dc, 0.00 V > hw.sensors.5=lm0, IN5, volts_dc, 0.00 V > hw.sensors.6=lm0, IN6, volts_dc, 0.00 V > hw.sensors.7=lm0, Temp, temp, 245.00 degC / 390.20 degF > hw.sensors.8=lm0, Fan1, fanrpm, 4856 RPM > hw.sensors.9=lm0, Fan2, fanrpm, 29347 RPM > hw.sensors.10=lm0, Fan3, fanrpm, 0 RPM > > Any ideias? > > 2006/1/16, Joakim Aronius <[EMAIL PROTECTED]>: > > > > Hi, > > > > I put together a script last week, for now i run it every hour in cron > > to see how/if temperature vaies over time. I don't have any usable sensors > > on my mobo. > > > > DISKS="0 1 2 3" > > S=`date +"%b %e %H:%M:%S "` > > > > for d in $DISKS; do > > TEMP=`atactl wd$d readattr |grep Temp |cut -f 4` > > S="$S\t$TEMP" > > done > > > > echo $S > > > > crontab: > > 0 * * * * /bin/sh /root/temp.sh >> > > /var/log/temp > > > > Cheers, > > /jkm > > > > * Ricardo Lucas ([EMAIL PROTECTED]) wrote: > > > Hello misc, > > > anyone knows a program that monitoring the cpu temperature and hard > > disk > > > temperature and rotation?! > > > Thank's for your time > > > > > > -- > > > Abragos > > > Ricardo Lucas > > > > > > We have to stop been egoist and think more on ourselves. > > > > > > -- > Abragos > Ricardo Lucas > > We have to stop been egoist and think more on ourselves. > -- Abragos Ricardo Lucas We have to stop been egoist and think more on ourselves.
