Here is my dmesg:
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD-K6(tm) 3D processor ("AuthenticAMD" 586-class) 494 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem = 200908800 (196200K)
avail mem = 176447488 (172312K)
using 2478 buffers containing 10149888 bytes (9912K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 07/15/95, BIOS32 rev. 0 @ 0xfdb40
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8250/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:01:0 ("SIS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 5591 PCI" rev 0x02
pciide0 at pci0 dev 0 function 1 "SIS 5513 EIDE" rev 0xd0: 5597/5598: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG VG33402A (3.40GB)>
wd0: 16-sector PIO, LBA, 3244MB, 6643728 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pcib0 at pci0 dev 1 function 0 "SIS 85C503 System" rev 0x01
"SIS 5595 System" rev 0x00 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 1 function 2 "SIS 5597/5598 USB" rev 0x11: irq 11, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SIS OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb0 at pci0 dev 2 function 0 "SIS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 6326 VGA" rev 0x0b: aperture at
0xf7000000, size 0x400000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vr0 at pci0 dev 10 function 0 "VIA VT6105 RhineIII" rev 0x86: irq 10 address
00:08:54:11:df:59
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004063, model 0x0034, rev. 4
vr1 at pci0 dev 11 function 0 "VIA VT6105 RhineIII" rev 0x86: irq 9 address
00:08:54:12:09:ac
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x004063, model 0x0034, rev. 4
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: LM78
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
isapnp0 at isa0 port 0x279: read port 0x203
"CMI8330/C3D Audio Adapter, @@@0001, , " at isapnp0 port 0x530/8,0x388/8 irq
5 drq 0 not configured
"CMI8330/C3D Audio Adapter, @[EMAIL PROTECTED], , " at isapnp0 port 0x300/2 irq
5 not
configured
joy0 at isapnp0 "CMI8330/C3D Audio Adapter, @[EMAIL PROTECTED], , " port 0x200/8
sb1 at isapnp0 "CMI8330/C3D Audio Adapter, @[EMAIL PROTECTED], , " port
0x220/16 irq 5
drq 1,5: dsp v4.13
midi1 at sb1: <SB MIDI UART>
audio0 at sb1
opl0 at sb1: model OPL3
midi2 at opl0: <SB Yamaha OPL3>
biomask f945 netmask ff45 ttymask ffc7
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
2006/1/16, Damien Miller <[EMAIL PROTECTED]>:
>
>
>
> On Mon, 16 Jan 2006, Ricardo Lucas wrote:
>
> > Any ideias?
>
> we can't help you without a dmesg.
>
> -d
>
>
--
Abragos
Ricardo Lucas
We have to stop been egoist and think more on ourselves.
