On Tue, Jan 10, 2017 at 1:32 AM, Stuart Henderson <s...@spacehopper.org> wrote: > Aaron Mason wrote: >> >> Torn between a Barracuda web filter or a Portwell CAR 3000. The latter >> >> is more expensive but supports 10Gbit, whereas the Barracuda may only >> >> have 10/100. Both Core2Duo based, could probably upgrade to a >> >> Core2Quad or a Xeon with a 771->775 adapter. > > btw, I found some cheap CAR 3000 (this one says "caswell" rather than > portwell and is an oem firewall box), so here's a dmesg in case it's of > interest. sysctl hw follows below. > > Handy to have so many ports for Ł25, but 4x 1u fans (including the one in > the PSU) make it rather noisy. > > OpenBSD 6.0-current (GENERIC.MP) #122: Sun Jan 8 14:53:10 MST 2017 > bu...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4242145280 (4045MB) > avail mem = 4108922880 (3918MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xfbcb0 (45 entries) > bios0: vendor American Megatrends Inc. version "080015" date 12/22/2010 > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG OEMB SSDT > acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz, 2793.39 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM 2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LONG,LAHF,PERF,SENSOR > cpu0: 3MB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 265MHz > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz, 2793.00 MHz > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM 2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LONG,LAHF,PERF,SENSOR > cpu1: 3MB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 7 (P0P1) > acpiprt2 at acpi0: bus 1 (P0P4) > acpiprt3 at acpi0: bus 2 (P0P5) > acpiprt4 at acpi0: bus 3 (P0P6) > acpiprt5 at acpi0: bus 4 (P0P7) > acpiprt6 at acpi0: bus 5 (P0P8) > acpiprt7 at acpi0: bus 6 (P0P9) > acpicpu0 at acpi0: !C3(100@57 mwait.3@0x30), !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: !C3(100@57 mwait.3@0x30), !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS > "AWY0001" at acpi0 not configured > "PNP0501" at acpi0 not configured > "PNP0501" at acpi0 not configured > acpibtn0 at acpi0: PWRB > cpu0: Enhanced SpeedStep 2793 MHz: speeds: 2800, 2403, 2136, 1870, 1603 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel G41 Host" rev 0x03 > inteldrm0 at pci0 dev 2 function 0 "Intel G41 Video" rev 0x03 > drm0 at inteldrm0 > intagp0 at inteldrm0 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0: msi > inteldrm0: 1024x768, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi > pci1 at ppb0 bus 1 > em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:90:fb:39:8c:c4 > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi > pci2 at ppb1 bus 2 > em1 at pci2 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:90:fb:39:8c:c5 > ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: msi > pci3 at ppb2 bus 3 > em2 at pci3 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:90:fb:39:8c:c6 > ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: msi > pci4 at ppb3 bus 4 > em3 at pci4 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:90:fb:39:8c:c7 > ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: msi > pci5 at ppb4 bus 5 > em4 at pci5 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:90:fb:39:8c:c8 > ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: msi > pci6 at ppb5 bus 6 > em5 at pci6 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:90:fb:39:8c:c9 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 > pci7 at ppb6 bus 7 > pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01 > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility > pciide0: channel 0 disabled (no drives) > pciide0: channel 1 disabled (no drives) > pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 2 int 19 for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <INTEL SSDSC2BB080G4> > wd0: 1-sector PIO, LBA48, 76319MB, 156301488 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19 > iic0 at ichiic0 > iic0: addr 0x22 01=bf 04=00 05=00 07=c0 words 00=ffbf 01=bfff 02=ffff 03=ffff 04=0000 05=0000 06=ffc0 07=c0ff > iic0: addr 0x26 01=bf 04=00 05=00 07=c0 words 00=ffbf 01=bfff 02=ffff 03=ffff 04=0000 05=0000 06=ffc0 07=c0ff > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 > spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23 > lm1 at wbsio0 port 0xa00/8: W83627DHG > vmm0 at mainbus0: VMX > uhidev0 at uhub1 port 1 configuration 1 interface 0 "SIGMACHIP USB Keyboard" rev 1.10/1.10 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub1 port 1 configuration 1 interface 1 "SIGMACHIP USB Keyboard" rev 1.10/1.10 addr 2 > uhidev1: iclass 3/0, 2 report ids > uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 > uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (c39a3eaa2bb5100d.a) swap on wd0b dump on wd0b > > $ sysctl hw > hw.machine=amd64 > hw.model=Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz > hw.ncpu=2 > hw.byteorder=1234 > hw.pagesize=4096 > hw.disknames=wd0:c39a3eaa2bb5100d > hw.diskcount=1 > hw.sensors.cpu0.temp0=27.00 degC > hw.sensors.lm1.temp0=31.00 degC > hw.sensors.lm1.temp1=34.50 degC > hw.sensors.lm1.fan0=5818 RPM > hw.sensors.lm1.fan1=21093 RPM > hw.sensors.lm1.volt0=1.08 VDC (VCore) > hw.sensors.lm1.volt1=12.25 VDC (+12V) > hw.sensors.lm1.volt2=3.25 VDC (+3.3V) > hw.sensors.lm1.volt3=3.25 VDC (+3.3V) > hw.sensors.lm1.volt4=-11.50 VDC (-12V) > hw.sensors.lm1.volt5=1.58 VDC > hw.sensors.lm1.volt6=1.48 VDC > hw.sensors.lm1.volt7=3.25 VDC (3.3VSB) > hw.sensors.lm1.volt8=1.60 VDC (VBAT) > hw.cpuspeed=2793 > hw.setperf=99 > hw.serialno=1122C00444 > hw.uuid=00020003-0004-0005-0006-000700080009 > hw.physmem=4242145280 > hw.usermem=4238712832 > hw.ncpufound=2 > hw.allowpowerdown=1 > hw.perfpolicy=manual >
Thanks, unfortunately Fleabay doesn't turn up anything for "caswell" in my price range. As it is, I might be able to resurrect my Lacie using a pair of USB thumb drives plugged into the onboard header, set up in softraid 1. -- Aaron Mason - Programmer, open source addict I've taken my software vows - for beta or for worse
