Aaron Mason wrote:
> >> Torn between a Barracuda web filter or a Portwell CAR 3000. The latter
> >> is more expensive but supports 10Gbit, whereas the Barracuda may only
> >> have 10/100. Both Core2Duo based, could probably upgrade to a
> >> Core2Quad or a Xeon with a 771->775 adapter.
btw, I found some cheap CAR 3000 (this one says "caswell" rather than
portwell and is an oem firewall box), so here's a dmesg in case it's of
interest. sysctl hw follows below.
Handy to have so many ports for £25, but 4x 1u fans (including the one in
the PSU) make it rather noisy.
OpenBSD 6.0-current (GENERIC.MP) #122: Sun Jan 8 14:53:10 MST 2017
bu...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4242145280 (4045MB)
avail mem = 4108922880 (3918MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xfbcb0 (45 entries)
bios0: vendor American Megatrends Inc. version "080015" date 12/22/2010
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB SSDT
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) USB0(S4) USB1(S4) USB2(S4)
USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz, 2793.39 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LONG,LAHF,PERF,SENSOR
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 265MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz, 2793.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LONG,LAHF,PERF,SENSOR
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (P0P1)
acpiprt2 at acpi0: bus 1 (P0P4)
acpiprt3 at acpi0: bus 2 (P0P5)
acpiprt4 at acpi0: bus 3 (P0P6)
acpiprt5 at acpi0: bus 4 (P0P7)
acpiprt6 at acpi0: bus 5 (P0P8)
acpiprt7 at acpi0: bus 6 (P0P9)
acpicpu0 at acpi0: !C3(100@57 mwait.3@0x30), !C2(500@1 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu1 at acpi0: !C3(100@57 mwait.3@0x30), !C2(500@1 mwait.1@0x10), C1(1000@1
mwait.1), PSS
"AWY0001" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0501" at acpi0 not configured
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2793 MHz: speeds: 2800, 2403, 2136, 1870, 1603 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel G41 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel G41 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:90:fb:39:8c:c4
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:90:fb:39:8c:c5
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:90:fb:39:8c:c6
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: msi
pci4 at ppb3 bus 4
em3 at pci4 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:90:fb:39:8c:c7
ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: msi
pci5 at ppb4 bus 5
em4 at pci5 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:90:fb:39:8c:c8
ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: msi
pci6 at ppb5 bus 6
em5 at pci6 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:90:fb:39:8c:c9
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci7 at ppb6 bus 7
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <INTEL SSDSC2BB080G4>
wd0: 1-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19
iic0 at ichiic0
iic0: addr 0x22 01=bf 04=00 05=00 07=c0 words 00=ffbf 01=bfff 02=ffff 03=ffff
04=0000 05=0000 06=ffc0 07=c0ff
iic0: addr 0x26 01=bf 04=00 05=00 07=c0 words 00=ffbf 01=bfff 02=ffff 03=ffff
04=0000 05=0000 06=ffc0 07=c0ff
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0xa00/8: W83627DHG
vmm0 at mainbus0: VMX
uhidev0 at uhub1 port 1 configuration 1 interface 0 "SIGMACHIP USB Keyboard"
rev 1.10/1.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "SIGMACHIP USB Keyboard"
rev 1.10/1.10 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (c39a3eaa2bb5100d.a) swap on wd0b dump on wd0b
$ sysctl hw
hw.machine=amd64
hw.model=Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz
hw.ncpu=2
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=wd0:c39a3eaa2bb5100d
hw.diskcount=1
hw.sensors.cpu0.temp0=27.00 degC
hw.sensors.lm1.temp0=31.00 degC
hw.sensors.lm1.temp1=34.50 degC
hw.sensors.lm1.fan0=5818 RPM
hw.sensors.lm1.fan1=21093 RPM
hw.sensors.lm1.volt0=1.08 VDC (VCore)
hw.sensors.lm1.volt1=12.25 VDC (+12V)
hw.sensors.lm1.volt2=3.25 VDC (+3.3V)
hw.sensors.lm1.volt3=3.25 VDC (+3.3V)
hw.sensors.lm1.volt4=-11.50 VDC (-12V)
hw.sensors.lm1.volt5=1.58 VDC
hw.sensors.lm1.volt6=1.48 VDC
hw.sensors.lm1.volt7=3.25 VDC (3.3VSB)
hw.sensors.lm1.volt8=1.60 VDC (VBAT)
hw.cpuspeed=2793
hw.setperf=99
hw.serialno=1122C00444
hw.uuid=00020003-0004-0005-0006-000700080009
hw.physmem=4242145280
hw.usermem=4238712832
hw.ncpufound=2
hw.allowpowerdown=1
hw.perfpolicy=manual
