Maybe one of these is really supposed to be a PCI-PCI bridge. "Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured "Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured "Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
Kent Ho [EMAIL PROTECTED] wrote: > Same with current snapshot as well. Cannot detect the BCM5704 dual port > NIC. > > Configure the network? [yes] > No more interfaces to initialize. > > Here's the dmesg: > OpenBSD 3.8-current (RAMDISK_CD) #627: Thu Jan 5 17:50:36 MST 2006 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > real mem = 3488182272 (3406428K) > avail mem = 2992111616 (2921984K) > using 22937 buffers containing 349024256 bytes (340844K) of memory > mainbus0 (root) > cpu0 at mainbus0: (uniprocessor) > cpu0: AMD Opteron(tm) Processor 248, 2210.44 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > pci0 at mainbus0 bus 0: configuration mode 1 > "Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured > "Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured > "Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured > ohci0 at pci0 dev 2 function 0 "Nvidia nForce4 USB" rev 0xa2: irq 10, > version 1.0, legacy support > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 > uhub0: Nvidia OHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 10 ports with 10 removable, self powered > pciide0 at pci0 dev 6 function 0 "Nvidia nForce4 IDE" rev 0xf2: DMA, > channel 0 configured to compatibility, channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8525B, 1.02> SCSI0 > 5/cdrom removable > cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 > pciide0: channel 1 disabled (no drives) > pciide1 at pci0 dev 7 function 0 "Nvidia nForce4 SATA 1" rev 0xf3: DMA > pciide1: using irq 11 for native-PCI interrupt > pciide2 at pci0 dev 8 function 0 "Nvidia nForce4 SATA 2" rev 0xf3: DMA > pciide2: using irq 10 for native-PCI interrupt > wd0 at pciide2 channel 0 drive 0: <WDC WD1200JS-00MHB1> > wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors > wd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5 > wd1 at pciide2 channel 1 drive 0: <WDC WD1200JS-00MHB1> > wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors > wd1(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 5 > ppb0 at pci0 dev 9 function 0 "Nvidia nForce4 PCI-PCI" rev 0xa2 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 7 function 0 "ATI Rage XL" rev 0x27 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > ppb1 at pci0 dev 14 function 0 "Nvidia nForce4 PCIE" rev 0xa3 > pci2 at ppb1 bus 2 > pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 > pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 > pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00 > pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00 > pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > isa0 at mainbus0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > rd0: fixed, 3584 blocks > dkcsum: wd0 matches BIOS drive 0x80 > wd1: no disk label > dkcsum: wd1 matches BIOS drive 0x81 > root on rd0a > rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 > erase ^?, werase ^W, kill ^U, intr ^C, status ^T > (I)nstall, (U)pgrade or (S)hell? > > thx. > > Kent. > > Kent Ho wrote: > >Hi, > > > >I'm unable to install 3.8 on my remote box. It can pxeboot fine but > >once 3.8 is booted up(bsd.rd) it cannot detect the BCM5704 dual port > >NICs. Install via network is the only way for me at the moment. > > > >It has the following in the boot messages: > >"Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured > >"Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured > >"Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured > > > >Could these be related? I did some search on the list, this may be > >related to PCI-X support issue in Openbsd? The NIC is connected on the > >"PCI-X Bridge A (133MHz)" according to the specs. > > > >http://www.tyan.com/products/html/thunderk8sre_spec.html > > > >I have the "S2891G2NR" model which has integrated GbE LAN (2) & SATA2 > >controller. > > > >Any help would be appreciated. I have access to this box for limited > >time for testing only. I'm hoping to adopt this m/b as a bridging > >firewall with Openbsd. If you need any other info please let me know. > > > >Here the dmesg from pxeboot & bsd.rd via serial console: > > > >OpenBSD 3.8 (RAMDISK_CD) #472: Sat Sep 10 16:09:03 MDT 2005 > > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > >real mem = 3488182272 (3406428K) > >avail mem = 2992402432 (2922268K) > >using 22937 buffers containing 349024256 bytes (340844K) of memory > >mainbus0 (root) > >cpu0 at mainbus0: (uniprocessor) > >cpu0: AMD Opteron(tm) Processor 248, 2210.48 MHz > >cpu0: > >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW > > > > > >cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB > >64b/line 16-way L2 cache > >cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully > >associative > >cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully > >associative > >pci0 at mainbus0 bus 0: configuration mode 1 > >"Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured > >"Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured > >"Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured > >ohci0 at pci0 dev 2 function 0 "Nvidia nForce4 USB" rev 0xa2: irq 10, > >version 1.0, legacy support > >usb0 at ohci0: USB revision 1.0 > >uhub0 at usb0 > >uhub0: Nvidia OHCI root hub, rev 1.00/1.00, addr 1 > >uhub0: 10 ports with 10 removable, self powered > >pciide0 at pci0 dev 6 function 0 "Nvidia nForce4 IDE" rev 0xf2: DMA, > >channel 0 configured to compatibility, channel 1 configured to > >compatibility > >atapiscsi0 at pciide0 channel 0 drive 1 > >scsibus0 at atapiscsi0: 2 targets > >cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8525B, 1.02> SCSI0 > >5/cdrom removable > >cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 > >pciide0: channel 1 disabled (no drives) > >pciide1 at pci0 dev 7 function 0 "Nvidia nForce4 SATA 1" rev 0xf3: DMA > >pciide1: using irq 11 for native-PCI interrupt > >pciide2 at pci0 dev 8 function 0 "Nvidia nForce4 SATA 2" rev 0xf3: DMA > >pciide2: using irq 10 for native-PCI interrupt > >wd0 at pciide2 channel 0 drive 0: <WDC WD1200JS-00MHB1> > >wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors > >wd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5 > >wd1 at pciide2 channel 1 drive 0: <WDC WD1200JS-00MHB1> > >wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors > >wd1(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 5 > >ppb0 at pci0 dev 9 function 0 "Nvidia nForce4 PCI-PCI" rev 0xa2 > >pci1 at ppb0 bus 1 > >vga1 at pci1 dev 7 function 0 "ATI Rage XL" rev 0x27 > >wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > >ppb1 at pci0 dev 14 function 0 "Nvidia nForce4 PCIE" rev 0xa3 > >pci2 at ppb1 bus 2 > >pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 > >pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 > >pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > >pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > >pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00 > >pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00 > >pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > >pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > >isa0 at mainbus0 > >com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > >com0: console > >com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > >pckbc0 at isa0 port 0x60/5 > >pckbd0 at pckbc0 (kbd slot) > >pckbc0: using irq 1 for kbd slot > >wskbd0 at pckbd0: console keyboard, using wsdisplay0 > >rd0: fixed, 3584 blocks > >dkcsum: wd0 matches BIOS drive 0x80 > >wd1: no disk label > >dkcsum: wd1 matches BIOS drive 0x81 > >root on rd0a > >rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 > >erase ^?, werase ^W, kill ^U, intr ^C, status ^T > >(I)nstall, (U)pgrade or (S)hell? > > > > > >The box works normally with centos3.x and centos4.x and sees the NICs as: > >tg3.c:v3.27-rh (May 5, 2005) > >ACPI: PCI interrupt 0000:0a:09.0[A] -> GSI 28 (level, low) -> IRQ 217 > >divert: allocating divert_blk for eth0 > >eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] > >(PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:31:74:72 > >eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] > >TSOcap[1] > >ACPI: PCI interrupt 0000:0a:09.1[B] -> GSI 29 (level, low) -> IRQ 225 > >divert: allocating divert_blk for eth1 > >eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] > >(PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:31:74:73 > >eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] > >TSOcap[1] > > > > > >many thanks. > >Kent. -- "You were about to change the channel when God healed you" -- Benny Hinn
