Dustin Lundquist [EMAIL PROTECTED] wrote:
> I have the K8SE (non rack mount version) and I verified that the
> Broadcom NICs where not seen by either the amd64 or i386 RAMDISK kernels
> on the 3.8 release CDs. The Broadcom NIC is attached the the AMD 8131
> HT-PCI bridge not the NForce junk. The K8SE has a Intel Pro/100 attached
> the the PCI-33 bus of the NForce, so I can get the machine up and run
> tests if needed.
Well, there's no AMD 8131 in your dmesg. It's all nforce.
Oh well..For your amusement, here's a Supermicro H8SSL-i based system that I
just put together for running OpenSER / mediaproxy
OpenBSD 3.8-current (GENERIC) #406: Wed Jan 4 04:24:52 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2147020800 (2096700K)
avail mem = 1836056576 (1793024K)
using 22937 buffers containing 214908928 bytes (209872K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Opteron(tm) Processor 148, 2194.80 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-
way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 1 function 0 vendor "ServerWorks", unknown product 0x0036 rev 0
x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 13 function 0 vendor "ServerWorks", unknown product 0x0104 rev
0xb2
pci2 at ppb1 bus 2
bge0 at pci2 dev 3 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100):
irq 5, address 00:30:48:56:64:88
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 3 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100):
irq 9, address 00:30:48:56:64:89
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
pciide0 at pci1 dev 14 function 0 vendor "ServerWorks", unknown product 0x024b r
ev 0x00: DMA (unsupported), channel 0 configured to native-PCI, channel 1 config
ured to native-PCI
pciide0: using irq 11 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
pciide1 at pci1 dev 14 function 1 vendor "ServerWorks", unknown product 0x024b r
ev 0x00: DMA (unsupported), channel 0 configured to native-PCI, channel 1 config
ured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
pciide1: channel 0 ignored (not responding; disabled or no drives?)
pciide1: channel 1 ignored (not responding; disabled or no drives?)
pchb0 at pci0 dev 2 function 0 vendor "ServerWorks", unknown product 0x0205 rev
0x00
pciide2 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
wd0 at pciide2 channel 0 drive 0: <SanDisk SDCFH-1024>
wd0: 1-sector PIO, LBA, 977MB, 2001888 sectors
wd0(pciide2:0:0): using PIO mode 4, DMA mode 2
pcib0 at pci0 dev 2 function 2 vendor "ServerWorks", unknown product 0x0234 rev
0x00
ohci0 at pci0 dev 3 function 0 vendor "ServerWorks", unknown product 0x0223 rev
0x01: irq 10, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1 vendor "ServerWorks", unknown product 0x0223 rev
0x01: irq 10, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 2 vendor "ServerWorks", unknown product 0x0223 rev
0x01: irq 10
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ServerWorks EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
vga1 at pci0 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
