Jonathan Gray wrote:
On Fri, Nov 27, 2015 at 12:56:36AM +0100, Mikkel C. Simonsen wrote:
Today I installed an Intel 82546EB dual-port NIC in a Fujitsu Siemens
Futro S400, that I plan to use as a router/firewall.
Only one of the interfaces shows up in dmesg, and it's not working after
boot. Is this a known problem, and is there a fix? Full dmesg attached.
Mikkel C. Simonsen
It sounds like your system didn't setup the pci bar correctly.
pcidump -v will give more details on that.
0x8186 is unheard of for intel pci nics.
Be warned that machines with sis chipsets are horrible, I'm glad they
stopped making them a while back.
A late follow-up. It turns out the Intel (HP) NIC damaged the system
somehow. No other PCI cards worked properly after the HP dual-port NIC
had been installed. It killed a Neoware thin client also (VIA chip set).
In an HP thin client the card does work however...
I tried an IBM dual-port NIC (Broadcom) in a different Futro S400 - this
works just fine. dmesg of the working S400 attached.
Mikkel C. Simonsen
OpenBSD 5.8 (GENERIC) #1066: Sun Aug 16 02:33:00 MDT 2015
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2
cache) 1.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,MPC,MMXX,3DNOW2,3DNOW
real mem = 234307584 (223MB)
avail mem = 217321472 (207MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 05/14/08, BIOS32 rev. 0 @ 0xfaa30, SMBIOS rev.
2.2 @ 0xf0000 (31 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00PG Rev. 4.00.0Q"
date 05/14/2008
bios0: FUJITSU SIEMENS FUTRO S400
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP SSDT
acpi0: wakeup devices USB0(S5) USB1(S5) USB2(S5) USB3(S5) AMR0(S4)
UAR1(S5) UAR2(S5) PS2M(S5) PS2K(S4) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000! 0xd0000/0x1800
0xd2000/0x1000
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: PowerNow! K7 1001 MHz: speeds: 1000 800 667 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03
sisagp0 at pchb0
agp0 at sisagp0: aperture at 0xe8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "SiS 86C202 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 741: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FCR256>
wd0: 1-sector PIO, LBA, 249MB, 511056 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 11,
SiS7012 AC97
ac97: codec id 0x414c4770 (Avance Logic ALC203 rev 0)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 15,
version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 9,
version 1.0, legacy support
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 3
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
bge0 at pci0 dev 7 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): irq 10, address 00:10:18:32:eb:16
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci0 dev 7 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): irq 11, address 00:10:18:32:eb:17
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
re0 at pci0 dev 9 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), irq 15, address 00:90:dc:a1:a7:28
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
lm1 at wbsio0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (0dfb815ba58e2fb5.a) swap on wd0b dump on wd0b
