Hi Gabriele, I would try to install older version, to be sure, it is not related to installer version...
On Mon, 1 Feb 2016 at 13:16 Ville Valkonen <weezeld...@gmail.com> wrote: > Hi, > > On 1 February 2016 at 08:21, Gabriele Tozzi <gabri...@tozzi.eu> wrote: > > This is my first message on the list so, first of all, hello everybody! > :) > > > > I've recently bought a dedicated PC, planning to use it as a firewall by > > installing OpenBSD on it. > > > > I have downloaded the install80.iso, checked the sha sum, and read the > > installation guide. > > I have burned the iso to a cd-rom and checked the sha sum again on the > > machine I am trying to install. > > I have tested the hardware and the general functionality of the machine > > with common open source tools (memtest and succesfully installing a > > linux distro). > > > > When I boot the i386 OpenBSD 5.8 CD, it loads the kernel and writes a > > lot of blue stuff, then stops at: > > > > wdc_atapi_intr: warning: reading only 0 of 18 bytes > > > > For those who have a browser, here is a full screenshoot: > > http://imagebin.ca/v/2VR8MRMArdG7 > > > > I've tried to look for this error using a search engine, but I > > surprisingly got zero results. > > Check /usr/src/sys/dev/atapiscsi/atapiscsi.c and line 1042. A bit > above, there is the following comment: > 1028 /* Exceptional case - drive want to transfer more > 1029 data than we have buffer for */ > > Though, no idea/time to see how to fix it. > > -- > Regards, > Ville Valkonen > > -- Ruslanas Gžibovskis +370 6030 7030 RHCE: 130-192-255
