Hello,
when copying files from one harddisk to another, which are both
connected via the same SATA3 ASMedia ASM1061 controller, there
eventually will be a kernel panic on my setup. It's reproducible, but
the timing is different on each run of cp -R.
Copying files to a harddisk on the Intel controller works without a problem.
(Already tried two different hard disks. Could still be a hardware
issue, though.)
I was able to take pictures of ddb.
# uname -a
OpenBSD sw2.cve.local 5.9 GENERIC.MP#1778 amd64
# dmesg
OpenBSD 5.9-beta (GENERIC.MP) #1778: Wed Dec 23 18:23:06 MST 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17014210560 (16226MB)
avail mem = 16494436352 (15730MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xecec0 (18 entries)
bios0: vendor American Megatrends Inc. version "C1.60" date 12/15/2015
bios0: ASRock N3700-ITX
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT AAFT MCFG HPET SSDT SSDT SSDT
UEFI LPIT CSRT SSDT
acpi0: wakeup devices PS2K(S4) PS2M(S4) UAR1(S4) UR11(S1) UR12(S1)
UR13(S1) UR14(S1) XHC1(S4) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4)
PXSX(S4) RP03(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz, 1600.43 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 80MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz, 1600.01 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz, 1600.01 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz, 1600.01 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 4 (RP04)
acpiec0 at acpi0: not present
acpicpu0 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: CLK0, resource for CAMD
acpipwrres1 at acpi0: CLK0, resource for CAM1
acpipwrres2 at acpi0: CLK1, resource for CAM2, CAM3
acpipwrres3 at acpi0: USBC, resource for XHC1
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1601, 1600, 1520, 1440, 1360,
1280, 1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x21
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x21
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x21: msi,
AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, INTENSO, SAFM> SCSI3 0/direct fixed
t10.ATA_INTENSO_DE3F07591EC602140574
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, TOSHIBA MD04ACA5, FP2A> SCSI3
0/direct fixed naa.500003961b901eb5
sd1: 4769307MB, 512 bytes/sector, 9767541168 sectors
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x21: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Baswell TXE" rev 0x21 at pci0 dev 26 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x21: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x21: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x21: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x11: RTL8168G/8111G
(0x4c00), msi, address d0:50:99:82:b5:2a
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb3 at pci0 dev 28 function 3 "Intel Braswell PCIE" rev 0x21: msi
pci4 at ppb3 bus 4
ahci1 at pci4 dev 0 function 0 "ASMedia ASM1061 AHCI" rev 0x02: msi,
AHCI 1.2
ahci1: port 0: 6.0Gb/s
ahci1: port 1: 6.0Gb/s
scsibus2 at ahci1: 32 targets
sd2 at scsibus2 targ 0 lun 0: <ATA, ST8000AS0002-1NA, AR13> SCSI3
0/direct fixed naa.5000c5007b20efd1
sd2: 7630885MB, 512 bytes/sector, 15628053168 sectors
sd3 at scsibus2 targ 1 lun 0: <ATA, WDC WD30EFRX-68E, 80.0> SCSI3
0/direct fixed naa.50014ee2b4a30ff0
sd3: 2861588MB, 512 bytes/sector, 5860533168 sectors
pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x21
ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x21: apic
1 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33
lm1 at wbsio0 port 0x290/8: NCT6776F
uhub1 at uhub0 port 1 "ASRock ASM107x" rev 2.10/1.00 addr 2
uhub2 at uhub0 port 5 "Genesys Logic USB2.0 Hub" rev 2.00/88.31 addr 3
uhub3 at uhub0 port 8 "ASRock ASM107x" rev 3.00/1.00 addr 4
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
softraid0: sd4 was not shutdown properly
sd4 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd4: 240088MB, 512 bytes/sector, 491700927 sectors
root on sd4a (9be727ef91ed5831.a) swap on sd4b dump on sd4b
WARNING: / was not properly unmounted
softraid0: sd5 was not shutdown properly
softraid0: sd5 was not shutdown properly
sd5 at scsibus4 targ 2 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd5: 4769306MB, 512 bytes/sector, 9767540576 sectors
WARNING: R/W mount of /home denied. Filesystem is not clean - run fsck
umass0 at uhub0 port 3 configuration 1 interface 0 "Sharkoon Flexi-Drive
EC1" rev 2.00/1.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus5 at umass0: 2 targets, initiator 0
sd6 at scsibus5 targ 1 lun 0: <Sharkoon, Flexi-Drive EC1, PMAP> SCSI0
0/direct removable serial.13fe1d00907A030008D1
sd6: 1968MB, 512 bytes/sector, 4030464 sectors
sd6 detached
scsibus5 detached
umass0 detached
umass0 at uhub0 port 3 configuration 1 interface 0 "Sharkoon Flexi-Drive
EC1" rev 2.00/1.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus5 at umass0: 2 targets, initiator 0
sd6 at scsibus5 targ 1 lun 0: <Sharkoon, Flexi-Drive EC1, PMAP> SCSI0
0/direct removable serial.13fe1d00907A030008D1
sd6: 1968MB, 512 bytes/sector, 4030464 sectors
sd6 detached
scsibus5 detached
umass0 detached
softraid0: sd6 was not shutdown properly
softraid0: sd6 was not shutdown properly
sd6 at scsibus4 targ 3 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd6: 7629861MB, 512 bytes/sector, 15625955424 sectors
# mount
/dev/sd4a on / type ffs (local)
/dev/sd5a on /home type ffs (local, nodev, nosuid)
/dev/sd4g on /home/f_Schrank type ffs (local, nodev, nosuid)
/dev/sd3a on /home/f_Schublade type ffs (local, nodev, nosuid)
/dev/sd3d on /home/x_Sicherung type ffs (local, nodev, nosuid)
/dev/sd4f on /tmp type ffs (local, nodev, nosuid)
/dev/sd4d on /usr type ffs (local, nodev)
/dev/sd4e on /var type ffs (local, nodev, nosuid)
/dev/sd6a on /mnt/BackupDisk type ffs (local, read-only)
# df
Filesystem 512-blocks Used Avail Capacity Mounted on
/dev/sd4a 2065052 106004 1855796 5% /
/dev/sd5a 9690732240 192 9206195440 0% /home
/dev/sd4g 406655096 89968312 296354032 23% /home/f_Schrank
/dev/sd3a 4261202976 15689520 4032453312 0% /home/f_Schublade
/dev/sd3d 1559328752 16 1481362304 0% /home/x_Sicherung
/dev/sd4f 33012348 20 31361712 0% /tmp
/dev/sd4d 16518908 1174828 14518136 7% /usr
/dev/sd4e 20630204 9920 19588776 0% /var
/dev/sd6a 15503062448 4625923632 10101985696 31% /mnt/BackupDisk
# df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/sd4a 1008M 51.8M 906M 5% /
/dev/sd5a 4.5T 96.0K 4.3T 0% /home
/dev/sd4g 194G 42.9G 141G 23% /home/f_Schrank
/dev/sd3a 2.0T 7.5G 1.9T 0% /home/f_Schublade
/dev/sd3d 744G 8.0K 706G 0% /home/x_Sicherung
/dev/sd4f 15.7G 10.0K 15.0G 0% /tmp
/dev/sd4d 7.9G 574M 6.9G 7% /usr
/dev/sd4e 9.8G 4.8M 9.3G 0% /var
/dev/sd6a 7.2T 2.2T 4.7T 31% /mnt/BackupDisk
# copy command and panic
http://s12.postimg.org/rb1xf3prx/129.jpg
ddb{0}> trace
http://s10.postimg.org/dou1gojax/130.jpg
ddb{1}> trace
http://s15.postimg.org/3rx6p7zjf/131.jpg
ddb{2}> trace
http://s17.postimg.org/9rwd3j1n3/132.jpg
ddb{3}> forgot the trace
http://s1.postimg.org/6qimu8u73/133.jpg
ddb{0}> ps
http://s21.postimg.org/pa6ywfo5j/134_6.jpg
ddb{0}> show uvm
http://s21.postimg.org/4rc2rda87/137.jpg
ddb{0}> show bcstats
http://s2.postimg.org/v80kudt09/138.jpg
(The panic is on 5.8-stable also but due to keyboard issues I was unable
to use ddb.)
Thanks for reading this far.
