On Wed, 21 Dec 2005 19:27:12 +0530, Siju George <[EMAIL PROTECTED]> wrote:
>> Details of the exact kind of service package you have from your provider >> and occasionally info on the DSL hardware you're using are needed to >> figure out how things should be set up on your end. >> > >Its a ADSL Router from HUAWEI >Model No. WA1003A >Has both option for LAN and wireless. >Internet connection comes by a telephone cable. It may have seemed strange for me to ask for this info but in many cases, including yours, it can make things real simple... This modem/router you have actually has a http based administration console built into the device and through the admin console you can configure the device itself to do your PPPoE for you. This means you can just use dhcp for your external interface and not run pppoe on your openbsd box. Details for accessing the web admin console on the device and setting up the pppoe are probably in the "quick-start" guide. http://www.huawei.com/products/terminal/pdf/view.do?f=360&ctype=0 Also you mentioned "wireless" so are you *sure* about the part number you posted. There is a "WA1003A-RU" model number as well that specifically mentions wireless. I also stumbled across some info for setting the VPI/VCI values but they may or may not apply to your telco/provider/country. If the defaults don't work, you may need to ask your provider for the correct values. http://www.vinuthomas.com/Forums/viewtopic/p=26302.html jcr
