Jasper Lievisse Adriaanse wrote:
On Sat, 17 Dec 2005 17:21:39 +0300
dimaz <[EMAIL PROTECTED]> wrote:
Jasper Lievisse Adriaanse wrote:
On Sat, 17 Dec 2005 17:12:58 +0300
dimaz <[EMAIL PROTECTED]> wrote:
I've installed OpenBSD on my small server, before on server was linux,
and 2-3 times a day my server beeps (3 times)...
What does it mean? And how I can control this beeps?
Have you checked your logs for anything out of the normal?
Maybe a dmesg might be helpfull?
Jasper
I've checked my root mailbox my /var/log/secure and /var/log/messages
and nothing found...
Please say so too on [EMAIL PROTECTED]
It would help _a lot_ if you also posted your dmesg to misc@ so we know at
least what platform you are using!
Sorry... :)
dmesg:
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Celeron ("GenuineIntel" 686-class, 128KB L2 cache) 501 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 200908800 (196200K)
avail mem = 176447488 (172312K)
using 2478 buffers containing 10149888 bytes (9912K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(2a) BIOS, date 12/28/99, BIOS32 rev. 0 @
0xfb010
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb648
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf00/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 11 15
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0802N>
wd0: 16-sector PIO, LBA48, 76351MB, 156368016 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured
vr0 at pci0 dev 14 function 0 "VIA VT6105 RhineIII" rev 0x86: irq 15
address 00:0d:88:b3:61:46
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004063, model 0x0034, rev. 4
xl0 at pci0 dev 15 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq
11, address 00:50:04:9f:ce:5e
exphy0 at xl0 phy 24: 3Com internal media interface
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcdisplay0 at isa0 port 0x3b0/16 iomem 0xb0000/32768
wsdisplay0 at pcdisplay0 mux 1: console (80x25, vt100 emulation),
using wskbd0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask 7ffd netmask fffd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
arp info overwritten for 192.168.1.2 by 00:0b:cd:a7:55:0b on vr0
arp info overwritten for 192.168.1.2 by 00:11:2f:69:bf:9a on vr0
arp info overwritten for 192.168.1.2 by 00:0b:cd:a7:55:0b on vr0
arp info overwritten for 192.168.1.2 by 00:11:2f:69:bf:9a on vr0
