Hello,
what is your policy for legacy hardware?
I'd like to reactivate an old laptop for special purpose with OpenBSD.
But I've problems to run supported releases on it.
The latest working version is OpenBSD 5.4.
Since 5.5 you can read in dmesg (dmesg.boot is attached):
cbb0 at pci0 dev 4 function 0 "TI PCI1420 CardBus" rev 0x00: irq 10,
CardBus support disabled
cbb1 at pci0 dev 4 function 1 "TI PCI1420 CardBus" rev 0x00: irq 10,
CardBus support disabled
At least since 5.6:
When plug-in or -out a network adapter the system freezes mostly.
It freezes also when plug-in usb flash stick.
Both works with OpenBSD 5.4.
Maybe some additional information. In version 5.3 (no dmesg available)
there was a rev 0x20 or 0x02 what I can remember. Versions greater-equal
5.4 reports always rev 0x00.
But it works with 5.4. So it might not be related to the disabled thing.
thx and br,
Markus
OpenBSD 5.6 (GENERIC) #274: Fri Aug 8 00:05:13 MDT 2014
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 598 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE,PERF
real mem = 66547712 (63MB)
avail mem = 53055488 (50MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/12/01, BIOS32 rev. 0 @ 0xfd8a0, SMBIOS
rev. 2.3 @ 0xe4010 (32 entries)
bios0: vendor TOSHIBA version "V1.40" date 06/12/01
bios0: TOSHIBA S1710
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP BOOT
acpi0: wakeup devices PWBN(S4) COM1(S4) MIN0(S4) MIN1(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWBN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "PXBAS008" serial 3658Q type NiMH oem "TOSHIBA"
bios0: ROM list: 0xc0000/0x10000 0xe4000/0x4000!
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 4 function 0 "TI PCI1420 CardBus" rev 0x00: irq 10, CardBus
support disabled
cbb1 at pci0 dev 4 function 1 "TI PCI1420 CardBus" rev 0x00: irq 10, CardBus
support disabled
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHK2060AT>
wd0: 16-sector PIO, LBA, 5729MB, 11733120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TOSHIBA, CD-ROM XM-7002Bc, 1M10> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 10
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 32MB SDRAM non-parity PC100CL2
clct0 at pci0 dev 8 function 0 "Cirrus Logic CS4281 CrystalClear" rev 0x01 irq 5
ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at clct0
"AT&T/Lucent LTMODEM" rev 0x00 at pci0 dev 16 function 0 not configured
cbb0: bad Vcc request. sock_ctrl 0xf000ff00, sock_status 0xf000e2c3
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
pcmcia1 at cardslot1
isa0 at piixpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (884c3a9652af4325.a) swap on wd0b dump on wd0b
syncing disks... done
cbb0: bad Vcc request. sock_ctrl 0xf000ff00, sock_status 0xf000e2c3
rebooting...
OpenBSD 5.4 (GENERIC) #37: Tue Jul 30 12:05:01 MDT 2013
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 598 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE,PERF
real mem = 66580480 (63MB)
avail mem = 54087680 (51MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/12/01, BIOS32 rev. 0 @ 0xfd8a0, SMBIOS
rev. 2.3 @ 0xe4010 (32 entries)
bios0: vendor TOSHIBA version "V1.40" date 06/12/01
bios0: TOSHIBA S1710
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd8a0/0x760
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf50/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xe4000/0x4000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 4 function 0 "TI PCI1420 CardBus" rev 0x00: irq 10
cbb1 at pci0 dev 4 function 1 "TI PCI1420 CardBus" rev 0x00: irq 10
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHK2060AT>
wd0: 16-sector PIO, LBA, 5729MB, 11733120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-7002Bc, 1M10> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 10
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 32MB SDRAM non-parity PC100CL2
clct0 at pci0 dev 8 function 0 "Cirrus Logic CS4281 CrystalClear" rev 0x01 irq 5
ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at clct0
"AT&T/Lucent LTMODEM" rev 0x00 at pci0 dev 16 function 0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
isa0 at piixpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (884c3a9652af4325.a) swap on wd0b dump on wd0b
Process (pid 1) got signal 9
panic: init died (signal 0, exit 6)
Stopped at
OpenBSD 5.4 (RAMDISK_CD) #34: Tue Jul 30 12:20:01 MDT 2013
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 598 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE,PERF
real mem = 66580480 (63MB)
avail mem = 58265600 (55MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/12/01, BIOS32 rev. 0 @ 0xfd8a0, SMBIOS
rev. 2.3 @ 0xe4010 (32 entries)
bios0: vendor TOSHIBA version "V1.40" date 06/12/01
bios0: TOSHIBA S1710
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd8a0/0x760
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf50/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xe4000/0x4000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
cbb0 at pci0 dev 4 function 0 "TI PCI1420 CardBus" rev 0x00: irq 10
cbb1 at pci0 dev 4 function 1 "TI PCI1420 CardBus" rev 0x00: irq 10
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHK2060AT>
wd0: 16-sector PIO, LBA, 5729MB, 11733120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-7002Bc, 1M10> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 10
"Intel 82371AB Power" rev 0x03 at pci0 dev 7 function 3 not configured
"Cirrus Logic CS4281 CrystalClear" rev 0x01 at pci0 dev 8 function 0 not
configured
"AT&T/Lucent LTMODEM" rev 0x00 at pci0 dev 16 function 0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
ne3 at pcmcia1 function 0 "Ethernet, Adapter, 2.0" port 0xa000/32, address
00:e0:98:94:78:92
syncing disks... done
rebooting...
OpenBSD 5.4 (GENERIC) #37: Tue Jul 30 12:05:01 MDT 2013
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 598 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE,PERF
real mem = 66580480 (63MB)
avail mem = 54087680 (51MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/12/01, BIOS32 rev. 0 @ 0xfd8a0, SMBIOS
rev. 2.3 @ 0xe4010 (32 entries)
bios0: vendor TOSHIBA version "V1.40" date 06/12/01
bios0: TOSHIBA S1710
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd8a0/0x760
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf50/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xe4000/0x4000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 4 function 0 "TI PCI1420 CardBus" rev 0x00: irq 10
cbb1 at pci0 dev 4 function 1 "TI PCI1420 CardBus" rev 0x00: irq 10
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHK2060AT>
wd0: 16-sector PIO, LBA, 5729MB, 11733120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-7002Bc, 1M10> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 10
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 32MB SDRAM non-parity PC100CL2
clct0 at pci0 dev 8 function 0 "Cirrus Logic CS4281 CrystalClear" rev 0x01 irq 5
ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at clct0
"AT&T/Lucent LTMODEM" rev 0x00 at pci0 dev 16 function 0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
isa0 at piixpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
ne3 at pcmcia1 function 0 "Ethernet, Adapter, 2.0" port 0xa000/32, address
00:e0:98:94:78:92
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (884c3a9652af4325.a) swap on wd0b dump on wd0b
