On 01/14/15 13:13, Evgeny Zhavoronkov wrote:
On 01/14/15 12:37, Evgeny Zhavoronkov wrote:
Hi, All!

I get these errors when actively use usb wifi adapter
Jan 14 16:08:57 t4 /bsd: 0x4f4e5155
Jan 14 16:08:57 t4 /bsd: usb_insert_transfer: xfer=0xfffffe821cb7c348
not busy 0x4f4e5155
Jan 14 16:08:57 t4 last message repeated 1006 times
Jan 14 16:08:57 t4 /bsd: athn0: could not wakeup chip
Jan 14 16:09:22 t4 /bsd: ehci_idone: ex=0xfffffe821cb7c348 is done!
Jan 14 16:10:40 t4 /bsd: 0x4f4e5155
Jan 14 16:10:40 t4 /bsd: usb_insert_transfer: xfer=0xfffffe821cb7c348
not busy 0x4f4e5155
Jan 14 16:10:40 t4 last message repeated 1006 times
Jan 14 16:10:40 t4 /bsd: athn0: could not wakeup chip
Jan 14 16:11:04 t4 /bsd: 0x4f4e5155
Jan 14 16:11:04 t4 /bsd: usb_insert_transfer: xfer=0xfffffe821cb7c348
not busy 0x4f4e5155
Jan 14 16:11:04 t4 last message repeated 1006 times
Jan 14 16:11:04 t4 /bsd: athn0: could not wakeup chip
Jan 14 16:12:20 t4 /bsd: ehci_idone: ex=0xfffffe821cb7c348 is done!
Jan 14 16:12:28 t4 /bsd: ehci_idone: ex=0xfffffe821cb7c348 is done!
Jan 14 16:15:12 t4 /bsd: ehci_idone: ex=0xfffffe821cb7c348 is done!
Jan 14 16:24:21 t4 last message repeated 7 times
Jan 14 16:32:25 t4 last message repeated 4 times


it errased my dmesg, so I can't provide it.

[demime 1.01d removed an attachment of type application/pgp-signature]


look in: /var/run/dmesg.boot
Fred

Thanks, here it is:

OpenBSD 5.6-stable (GENERIC.MP) #0: Sun Jan 11 20:07:24 MSK 2015
     root@t4.local.:/usr/src/sys/arch/amd64/compile/GENERIC.MP
     real mem = 8262713344 (7879MB)
     avail mem = 8033972224 (7661MB)
     mpath0 at root
     scsibus0 at mpath0: 256 targets
     mainbus0 at root
     bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdcd21000 (62 entries)
     bios0: vendor LENOVO version "GJET61WW (2.11 )" date 10/02/2013
     bios0: LENOVO 20AQ004TRT
     acpi0 at bios0: rev 2
     acpi0: sleep states S0 S3 S4 S5
     acpi0: tables DSDT FACP SLIC DBGP ECDT HPET APIC MCFG SSDT SSDT
     SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT TCPA UEFI MSDM ASF! BATB
     FPDT UEFI SSDT DMAR
     acpi0: wakeup devices LID_(S4) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3)
     HDEF(S4)
     acpitimer0 at acpi0: 3579545 Hz, 24 bits
     acpiec0 at acpi0
     acpihpet0 at acpi0: 14318179 Hz
     acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
     cpu0 at mainbus0: apid 0 (boot processor)
     cpu0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 1995.65 MHz
     cpu0:
     
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM
     cpu0: 256KB 64b/line 8-way L2 cache
     cpu0: smt 0, core 0, package 0
     mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
     cpu0: apic clock running at 99MHz
     cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
     cpu1 at mainbus0: apid 1 (application processor)
     cpu1: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 1995.38 MHz
     cpu1:
     
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM
     cpu1: 256KB 64b/line 8-way L2 cache
     cpu1: smt 1, core 0, package 0
     cpu2 at mainbus0: apid 2 (application processor)
     cpu2: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 1995.38 MHz
     cpu2:
     
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM
     cpu2: 256KB 64b/line 8-way L2 cache
     cpu2: smt 0, core 1, package 0
     cpu3 at mainbus0: apid 3 (application processor)
     cpu3: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 1995.38 MHz
     cpu3:
     
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM
     cpu3: 256KB 64b/line 8-way L2 cache
     cpu3: smt 1, core 1, package 0
     ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
     acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
     acpiprt0 at acpi0: bus 0 (PCI0)
     acpiprt1 at acpi0: bus -1 (PEG_)
     acpiprt2 at acpi0: bus 2 (EXP1)
     acpiprt3 at acpi0: bus 3 (EXP2)
     acpiprt4 at acpi0: bus -1 (EXP3)
     acpicpu0 at acpi0: C3, C1, PSS
     acpicpu1 at acpi0: C3, C1, PSS
     acpicpu2 at acpi0: C3, C1, PSS
     acpicpu3 at acpi0: C3, C1, PSS
     acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1
     acpitz0 at acpi0: critical temperature is 200 degC
     acpibtn0 at acpi0: LID_
     acpibat0 at acpi0: BAT0 model "45N1111" serial   399 type LiP oem
     "SONY"
     acpibat1 at acpi0: BAT1 model "45N1125" serial 18846 type LION oem
     "SANYO"
     acpiac0 at acpi0: AC unit online
     acpithinkpad0 at acpi0
     cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2101, 2100, 2000, 1900,
     1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
     pci0 at mainbus0 bus 0
     pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
     vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
     intagp at vga1 not configured
     inteldrm0 at vga1
     drm0 at inteldrm0
     drm: Memory usable by graphics device = 2048M
     error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register
     before writing to 100000
     error: [drm:pid0:intel_dp_set_link_train] *ERROR* Timed out
     waiting for DP idle patterns
     error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register
     before writing to 64040
     inteldrm0: 1600x900
     wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
     wsdisplay0: screen 1-5 added (std, vt100 emulation)
     azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev
     0x0b: msi
     azalia0: No codecs found
     "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not
     configured
     em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x04: msi,
     address 28:d2:44:3b:95:6f
     azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev
     0x04: msi
     azalia1: codecs: Realtek ALC292
     audio0 at azalia1
     ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
     pci1 at ppb0 bus 2
     rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev
     0x01: msi
     sdmmc0 at rtsx0
     ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xe4: msi
     pci2 at ppb1 bus 3
     "Intel Dual Band Wireless AC 7260" rev 0x6b at pci2 dev 0 function
     0 not configured
     ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04:
     apic 2 int 23
     usb0 at ehci0: USB revision 2.0
     uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
     pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
     ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04:
     msi, AHCI 1.3
     scsibus1 at ahci0: 32 targets
     sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA THNSNH12, HTLA> SCSI3
     0/direct fixed naa.500080d91004d72c
     sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
     ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04:
     apic 2 int 18
     iic0 at ichiic0
     spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
     isa0 at pcib0
     isadma0 at isa0
     pckbc0 at isa0 port 0x60/5
     pckbd0 at pckbc0 (kbd slot)
     pckbc0: using irq 1 for kbd slot
     wskbd0 at pckbd0: console keyboard, using wsdisplay0
     pms0 at pckbc0 (aux slot)
     pckbc0: using irq 12 for aux slot
     wsmouse0 at pms0 mux 0
     wsmouse1 at pms0 mux 0
     pms0: Synaptics clickpad, firmware 8.1
     pcppi0 at isa0 port 0x61
     spkr0 at pcppi0
     uhub1 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.04 addr
     2
     athn0 at uhub1 port 2 "ATHEROS USB2.0 WLAN" rev 2.00/1.08 addr 3
     uhub2 at uhub1 port 3 "LENOVO Lenovo ThinkPad Dock" rev 2.00/50.30
     addr 4
     uhidev0 at uhub2 port 3 configuration 1 interface 0 "SIGMACHIP USB
     Keyboard" rev 1.10/1.10 addr 5
     uhidev0: iclass 3/1
     ukbd0 at uhidev0: 8 variable keys, 6 key codes
     wskbd1 at ukbd0 mux 1
     wskbd1: connecting to wsdisplay0
     uhidev1 at uhub2 port 3 configuration 1 interface 1 "SIGMACHIP USB
     Keyboard" rev 1.10/1.10 addr 5
     uhidev1: iclass 3/0, 2 report ids
     uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
     uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
     uhub3 at uhub2 port 4 "Lenovo Lenovo ThinkPad Dock" rev 2.00/0.01
     addr 6
     uhidev2 at uhub3 port 1 configuration 1 interface 0 "Logitech USB
     Receiver" rev 2.00/24.00 addr 7
     uhidev2: iclass 3/1
     ukbd1 at uhidev2: 8 variable keys, 6 key codes
     wskbd2 at ukbd1 mux 1
     wskbd2: connecting to wsdisplay0
     uhidev3 at uhub3 port 1 configuration 1 interface 1 "Logitech USB
     Receiver" rev 2.00/24.00 addr 7
     uhidev3: iclass 3/1, 8 report ids
     ums0 at uhidev3 reportid 2: 16 buttons, Z dir
     wsmouse2 at ums0 mux 0
     uhid2 at uhidev3 reportid 3: input=4, output=0, feature=0
     uhid3 at uhidev3 reportid 4: input=1, output=0, feature=0
     uhid4 at uhidev3 reportid 8: input=1, output=0, feature=0
     uhidev4 at uhub3 port 1 configuration 1 interface 2 "Logitech USB
     Receiver" rev 2.00/24.00 addr 7
     uhidev4: iclass 3/0, 33 report ids
     uhid5 at uhidev4 reportid 16: input=6, output=6, feature=0
     uhid6 at uhidev4 reportid 17: input=19, output=19, feature=0
     uhid7 at uhidev4 reportid 32: input=14, output=14, feature=0
     uhid8 at uhidev4 reportid 33: input=31, output=31, feature=0
     urtwn0 at uhub3 port 2 "Realtek 802.11n WLAN Adapter" rev
     2.00/2.00 addr 8
     urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address d8:eb:97:14:98:57
     ugen0 at uhub1 port 6 "Validity Sensors product 0x0017" rev
     1.10/0.78 addr 9
     ugen1 at uhub1 port 7 "Intel product 0x07dc" rev 2.00/0.01 addr 10
     uvideo0 at uhub1 port 8 configuration 1 interface 0 "J30DA53LB
     Integrated Camera" rev 2.00/10.04 addr 11
     video0 at uvideo0
     vscsi0 at root
     scsibus2 at vscsi0: 256 targets
     softraid0 at root
     scsibus3 at softraid0: 256 targets
     root on sd0a (2226f153deb8d4a6.a) swap on sd0b dump on sd0b
     WARNING: / was not properly unmounted
     athn0: AR9271 rev 1 (1T1R), ROM rev 13, address b0:48:7a:88:d1:6e
     >


Apart from filling up your logs does the device work okay?

The output is from DIAGNOSTIC being defined (line 833 dev/usb/ehci.c).

The output from usbdevs -v might be useful for a developer.

Fred

Reply via email to