hi guys moving from openbsd 5.4 to 5.6 with a fresh install I've found Xorg
refuse to work.
*dmesg 5.4*
OpenBSD 5.4-current (GENERIC) #150: Thu Nov 14 00:34:42 MST 2013
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 931 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE,PERF
real mem = 401076224 (382MB)
avail mem = 382693376 (364MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/20/00, BIOS32 rev. 0 @ 0xfd87d,
SMBIOS rev. 2.2 @ 0xe4010 (42 entries)
bios0: vendor Phoenix Technologies Ltd. version "IP.01.03SP" date 06/20/2000
bios0: Hewlett-Packard HP Vectra
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP
acpi0: wakeup devices KBC0(S4) MSE0(S4) COMA(S5) COMB(S5) LAN_(S5) HUB_(S5)
USB_(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 1 (HUB_)
acpicpu0 at acpi0: C2
acpibat0 at acpi0: BBU_ not present
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xa000 0xca000/0x1000 0xe0000/0x4000!
0xe4000/0xc000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82815 Video" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xf0000000, size 0x4000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
cmpci0 at pci1 dev 0 function 0 "C-Media Electronics CMI8738/C3DX Audio"
rev 0x10: irq 5
audio0 at cmpci0
opl at cmpci0 not configured
mpu at cmpci0 not configured
xl0 at pci1 dev 4 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5,
address 00:01:03:02:13:cc
bmtphy0 at xl0 phy 24: 3C905C internal PHY, rev. 7
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST380011A>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITEON, CD-ROM LTN485S, JKF1> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801AA SMBus" rev 0x02: irq 9
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 256MB SDRAM non-parity PC133CL2
spdmem1 at iic0 addr 0x51: 128MB SDRAM non-parity PC100CL2
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Genius 2.4G Wireless
Mouse and Keyboard" rev 1.10/4.27 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Genius 2.4G Wireless
Mouse and Keyboard" rev 1.10/4.27 addr 2
uhidev1: iclass 3/1, 5 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 5: input=0, output=0, feature=7
umass0 at uhub0 port 2 configuration 1 interface 0 "USB2.0 External Mass
Storage Device" rev 2.00/9.28 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
cd1 at scsibus1 targ 1 lun 0: <LITE-ON, DVDRW SHW-160P6S, PS0B> SCSI0
5/cdrom removable serial.0ecda100DEF10C8802E8
uhidev2 at uhub0 port 2 configuration 1 interface 1 "USB2.0 External Mass
Storage Device" rev 2.00/9.28 addr 3
uhidev2: iclass 3/0
uhid3 at uhidev2: input=2, output=2, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (835dd43166fa9880.a) swap on wd0b dump on wd0b
.
*XORG log file 5.4*
[ 99.947] (--) checkDevMem: using aperture driver /dev/xf86
[ 99.967] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility
mode (version 3.32)
[ 100.053]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 100.053] X Protocol Version 11, Revision 0
[ 100.053] Build Operating System: OpenBSD 5.4 i386
[ 100.053] Current Operating System: OpenBSD fabiola.cantv.net 5.4
GENERIC#150 i386
[ 100.054] Build Date: 12 November 2013 05:14:46PM
[ 100.054]
[ 100.054] Current version of pixman: 0.30.2
[ 100.054] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 100.054] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 100.055] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 11
17:55:59 2014
[ 100.100] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 100.113] (==) No Layout section. Using the first Screen section.
[ 100.113] (==) No screen section available. Using defaults.
[ 100.113] (**) |-->Screen "Default Screen Section" (0)
[ 100.113] (**) | |-->Monitor "<default monitor>"
[ 100.132] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 100.132] (==) Disabling SIGIO handlers for input devices
[ 100.132] (==) Automatically adding devices
[ 100.132] (==) Automatically enabling devices
[ 100.132] (==) Not automatically adding GPU devices
[ 100.265] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 100.265] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 100.265] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 100.271] (II) Loader magic: 0x3c024040
[ 100.271] (II) Module ABI versions:
[ 100.271] X.Org ANSI C Emulation: 0.4
[ 100.271] X.Org Video Driver: 14.1
[ 100.271] X.Org XInput driver : 19.1
[ 100.271] X.Org Server Extension : 7.0
[ 100.277] (--) PCI:*(0:0:2:0) 8086:1132:103c:1245 rev 2, Mem @
0xf0000000/67108864, 0xec000000/524288
[ 100.280] Initializing built-in extension Generic Event Extension
[ 100.280] Initializing built-in extension SHAPE
[ 100.280] Initializing built-in extension MIT-SHM
[ 100.280] Initializing built-in extension XInputExtension
[ 100.280] Initializing built-in extension XTEST
[ 100.280] Initializing built-in extension BIG-REQUESTS
[ 100.281] Initializing built-in extension SYNC
[ 100.281] Initializing built-in extension XKEYBOARD
[ 100.281] Initializing built-in extension XC-MISC
[ 100.281] Initializing built-in extension SECURITY
[ 100.281] Initializing built-in extension XINERAMA
[ 100.281] Initializing built-in extension XFIXES
[ 100.281] Initializing built-in extension RENDER
[ 100.281] Initializing built-in extension RANDR
[ 100.281] Initializing built-in extension COMPOSITE
[ 100.281] Initializing built-in extension DAMAGE
[ 100.282] Initializing built-in extension MIT-SCREEN-SAVER
[ 100.282] Initializing built-in extension DOUBLE-BUFFER
[ 100.282] Initializing built-in extension RECORD
[ 100.282] Initializing built-in extension DPMS
[ 100.282] Initializing built-in extension X-Resource
[ 100.282] Initializing built-in extension XVideo
[ 100.282] Initializing built-in extension XVideo-MotionCompensation
[ 100.282] Initializing built-in extension XFree86-VidModeExtension
[ 100.283] Initializing built-in extension XFree86-DGA
[ 100.283] Initializing built-in extension XFree86-DRI
[ 100.283] Initializing built-in extension DRI2
[ 100.283] (II) LoadModule: "glx"
[ 100.313] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 100.326] (II) Module glx: vendor="X.Org Foundation"
[ 100.326] compiled for 1.14.3, module version = 1.0.0
[ 100.326] ABI class: X.Org Server Extension, version 7.0
[ 100.326] (==) AIGLX enabled
[ 100.327] Loading extension GLX
[ 100.327] (==) Matched intel as autoconfigured driver 0
[ 100.327] (==) Matched vesa as autoconfigured driver 1
[ 100.327] (==) Assigned the driver to the xf86ConfigLayout
[ 100.327] (II) LoadModule: "intel"
[ 100.329] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 100.370] (II) Module intel: vendor="X.Org Foundation"
[ 100.370] compiled for 1.14.3, module version = 2.20.19
[ 100.370] Module class: X.Org Video Driver
[ 100.370] ABI class: X.Org Video Driver, version 14.1
[ 100.391] (II) LoadModule: "vesa"
[ 100.393] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 100.402] (II) Module vesa: vendor="X.Org Foundation"
[ 100.402] compiled for 1.14.3, module version = 2.3.3
[ 100.402] Module class: X.Org Video Driver
[ 100.402] ABI class: X.Org Video Driver, version 14.1
[ 100.402] (II) intel: Driver for Intel Integrated Graphics Chipsets:
i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 100.404] (II) VESA: driver for VESA chipsets: vesa
[ 100.427] (WW) Falling back to old probe method for vesa
[ 100.429] (II) Loading sub module "vgahw"
[ 100.429] (II) LoadModule: "vgahw"
[ 100.440] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[ 100.452] (II) Module vgahw: vendor="X.Org Foundation"
[ 100.452] compiled for 1.14.3, module version = 0.1.0
[ 100.452] ABI class: X.Org Video Driver, version 14.1
[ 100.452] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 16/16
[ 100.452] (==) intel(0): Depth 16, (==) framebuffer bpp 16
[ 100.452] (==) intel(0): RGB weight 565
[ 100.452] (==) intel(0): Default visual is TrueColor
[ 100.453] (II) Loading sub module "xaa"
[ 100.453] (II) LoadModule: "xaa"
[ 100.471] (WW) Warning, couldn't open module xaa
[ 100.471] (II) UnloadModule: "xaa"
[ 100.471] (II) Unloading xaa
[ 100.471] (EE) intel: Failed to load module "xaa" (module does not
exist, 0)
[ 100.471] (II) Loading sub module "vbe"
[ 100.471] (II) LoadModule: "vbe"
[ 100.474] (II) Loading /usr/X11R6/lib/modules/libvbe.so
[ 100.502] (II) Module vbe: vendor="X.Org Foundation"
[ 100.502] compiled for 1.14.3, module version = 1.1.0
[ 100.502] ABI class: X.Org Video Driver, version 14.1
[ 100.503] (II) Loading sub module "int10"
[ 100.503] (II) LoadModule: "int10"
[ 100.506] (II) Loading /usr/X11R6/lib/modules/libint10.so
[ 100.514] (II) Module int10: vendor="X.Org Foundation"
[ 100.514] compiled for 1.14.3, module version = 1.0.0
[ 100.514] ABI class: X.Org Video Driver, version 14.1
[ 100.514] (II) intel(0): initializing int10
[ 100.520] (II) intel(0): Primary V_BIOS segment is: 0xc000
[ 100.522] (II) intel(0): VESA BIOS detected
[ 100.522] (II) intel(0): VESA VBE Version 3.0
[ 100.522] (II) intel(0): VESA VBE Total Mem: 1024 kB
[ 100.522] (II) intel(0): VESA VBE OEM: Intel(R) 815 Chipset Video BIOS
[ 100.522] (II) intel(0): VESA VBE OEM Software Rev: 4.1
[ 100.522] (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
[ 100.522] (II) intel(0): VESA VBE OEM Product: Intel(R) 815 Chipset
[ 100.522] (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[ 100.522] (II) Loading sub module "ddc"
[ 100.522] (II) LoadModule: "ddc"
[ 100.522] (II) Module "ddc" already built-in
[ 100.546] (II) intel(0): VESA VBE DDC supported
[ 100.546] (II) intel(0): VESA VBE DDC Level 2
[ 100.546] (II) intel(0): VESA VBE DDC transfer in appr. 1 sec.
[ 101.116] (II) intel(0): VESA VBE DDC read successfully
[ 101.142] (II) intel(0): Manufacturer: HKC Model: 222 Serial#: 2
[ 101.142] (II) intel(0): Year: 2008 Week: 13
[ 101.142] (II) intel(0): EDID Version: 1.3
[ 101.142] (II) intel(0): Analog Display Input, Input Voltage Level:
0.700/0.700 V
[ 101.143] (II) intel(0): Sync:
[ 101.143] (II) intel(0): Max Image Size [cm]: horiz.: 43 vert.: 27
[ 101.143] (II) intel(0): Gamma: 2.20
[ 101.143] (II) intel(0): DPMS capabilities: StandBy Suspend Off;
RGB/Color Display
[ 101.143] (II) intel(0): First detailed timing is preferred mode
[ 101.143] (II) intel(0): redX: 0.597 redY: 0.343 greenX: 0.316 greenY:
0.566
[ 101.143] (II) intel(0): blueX: 0.153 blueY: 0.131 whiteX: 0.313
whiteY: 0.329
[ 101.143] (II) intel(0): Supported established timings:
[ 101.143] (II) intel(0): 720x400@70Hz
[ 101.143] (II) intel(0): 640x480@60Hz
[ 101.143] (II) intel(0): 640x480@67Hz
[ 101.143] (II) intel(0): 640x480@72Hz
[ 101.143] (II) intel(0): 640x480@75Hz
[ 101.143] (II) intel(0): 800x600@60Hz
[ 101.143] (II) intel(0): 800x600@72Hz
[ 101.143] (II) intel(0): 800x600@75Hz
[ 101.143] (II) intel(0): 1024x768@60Hz
[ 101.143] (II) intel(0): 1024x768@70Hz
[ 101.143] (II) intel(0): 1024x768@75Hz
[ 101.143] (II) intel(0): 1280x1024@75Hz
[ 101.143] (II) intel(0): Manufacturer's mask: 0
[ 101.143] (II) intel(0): Supported standard timings:
[ 101.143] (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid:
129
[ 101.143] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 101.143] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 70 vid:
35457
[ 101.143] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid:
149
[ 101.143] (II) intel(0): Supported detailed timing:
[ 101.143] (II) intel(0): clock: 146.0 MHz Image Size: 433 x 270 mm
[ 101.144] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960
h_blank_end 2240 h_border: 0
[ 101.144] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059
v_blanking: 1089 v_border: 0
[ 101.144] (II) intel(0): Ranges: V min: 60 V max: 76 Hz, H min: 31 H
max: 96 kHz, PixClock max 215 MHz
[ 101.144] (II) intel(0): Monitor name:
[ 101.144] (II) intel(0): Serial No: 200804220001
[ 101.144] (II) intel(0): EDID (in hex):
[ 101.144] (II) intel(0): 00ffffffffffff002163220202000000
[ 101.144] (II) intel(0): 0d120103602b1b78eaf0659857519127
[ 101.144] (II) intel(0): 215054bdcf0081008180818a95000101
[ 101.144] (II) intel(0): 01010101010108399030621a274068b0
[ 101.144] (II) intel(0): 3600b10e1100001c000000fd003c4c1f
[ 101.144] (II) intel(0): 6015000a202020202020000000fc000a
[ 101.144] (II) intel(0): 202020202020202020202020000000ff
[ 101.144] (II) intel(0): 003230303830343232303030310a0086
[ 101.144] (II) intel(0): EDID vendor "HKC", prod id 546
[ 101.145] (II) intel(0): Using EDID range info for horizontal sync
[ 101.145] (II) intel(0): Using EDID range info for vertical refresh
[ 101.145] (II) intel(0): Printing DDC gathered Modelines:
[ 101.145] (II) intel(0): Modeline "1680x1050"x0.0 146.00 1680 1784
1960 2240 1050 1053 1059 1089 -hsync +vsync (65.2 kHz eP)
[ 101.145] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 101.145] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 101.145] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 101.145] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 101.145] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 101.145] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 101.145] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 101.145] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 101.145] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 101.145] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 101.145] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 101.145] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976
1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 101.145] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480
1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 101.146] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 101.146] (II) intel(0): Modeline "1280x1024"x70.0 128.94 1280 1368
1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[ 101.146] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672
1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 101.146] (--) intel(0): Integrated Graphics Chipset: Intel(R) i815
[ 101.146] (--) intel(0): Linear framebuffer at 0xF0000000
[ 101.146] (--) intel(0): IO registers at addr 0xEC000000
[ 101.147] (II) intel(0): Kernel reported 112640 total, 0 used
[ 101.147] (II) intel(0): I810CheckAvailableMemory: 450560k available
[ 101.147] (==) intel(0): Will alloc AGP framebuffer: 24576 kByte
[ 101.147] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 101.147] (II) intel(0): <default monitor>: Using hsync range of
31.00-96.00 kHz
[ 101.147] (II) intel(0): <default monitor>: Using vrefresh range of
60.00-76.00 Hz
[ 101.147] (II) intel(0): <default monitor>: Using maximum pixel clock of
215.00 MHz
[ 101.147] (II) intel(0): Estimated virtual size for aspect ratio 1.5926
is 1680x1050
[ 101.147] (II) intel(0): Clock range: 9.50 to 163.00 MHz
[ 101.147] (II) intel(0): Not using default mode "640x350" (vrefresh out
of range)
[ 101.147] (II) intel(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
[ 101.147] (II) intel(0): Not using default mode "640x400" (vrefresh out
of range)
[ 101.147] (II) intel(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
[ 101.147] (II) intel(0): Not using default mode "720x400" (vrefresh out
of range)
[ 101.147] (II) intel(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
[ 101.147] (II) intel(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "640x480" (vrefresh out
of range)
[ 101.148] (II) intel(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "800x600" (vrefresh out
of range)
[ 101.148] (II) intel(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "800x600" (vrefresh out
of range)
[ 101.148] (II) intel(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "1024x768i" (unknown
reason)
[ 101.148] (II) intel(0): Not using default mode "512x384i" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "1024x768" (vrefresh out
of range)
[ 101.148] (II) intel(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
[ 101.148] (II) intel(0): Not using default mode "1280x960" (vrefresh out
of range)
[ 101.149] (II) intel(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "1280x1024" (vrefresh
out of range)
[ 101.149] (II) intel(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "1600x1200" (height too
large for virtual size)
[ 101.149] (II) intel(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "1600x1200" (height too
large for virtual size)
[ 101.149] (II) intel(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "1600x1200" (height too
large for virtual size)
[ 101.149] (II) intel(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "1600x1200" (height too
large for virtual size)
[ 101.149] (II) intel(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "1600x1200" (height too
large for virtual size)
[ 101.149] (II) intel(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "1792x1344" (width too
large for virtual size)
[ 101.149] (II) intel(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "1792x1344" (width too
large for virtual size)
[ 101.149] (II) intel(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "1856x1392" (width too
large for virtual size)
[ 101.149] (II) intel(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "1856x1392" (width too
large for virtual size)
[ 101.149] (II) intel(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "1920x1440" (width too
large for virtual size)
[ 101.149] (II) intel(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "1920x1440" (width too
large for virtual size)
[ 101.149] (II) intel(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "1920x1440" (width too
large for virtual size)
[ 101.149] (II) intel(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
[ 101.149] (II) intel(0): Not using default mode "2048x1536" (width too
large for virtual size)
[ 101.150] (II) intel(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
[ 101.150] (II) intel(0): Not using default mode "2048x1536" (width too
large for virtual size)
[ 101.150] (II) intel(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
[ 101.150] (II) intel(0): Not using default mode "2048x1536" (width too
large for virtual size)
[ 101.150] (II) intel(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
[ 101.150] (--) intel(0): Virtual size is 1680x1050 (pitch 1728)
[ 101.150] (**) intel(0): *Driver mode "1680x1050": 146.0 MHz, 65.2 kHz,
59.9 Hz
[ 101.150] (II) intel(0): Modeline "1680x1050"x59.9 146.00 1680 1784
1960 2240 1050 1053 1059 1089 -hsync +vsync (65.2 kHz ezP)
[ 101.150] (**) intel(0): *Default mode "1400x1050": 155.8 MHz, 81.5 kHz,
74.8 Hz
[ 101.150] (II) intel(0): Modeline "1400x1050"x74.8 155.80 1400 1464
1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz zd)
[ 101.150] (**) intel(0): *Default mode "1400x1050": 122.0 MHz, 64.9 kHz,
60.0 Hz
[ 101.150] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488
1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz zd)
[ 101.150] (**) intel(0): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz,
75.0 Hz
[ 101.150] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz ez)
[ 101.150] (**) intel(0): *Driver mode "1280x1024": 128.9 MHz, 74.6 kHz,
70.0 Hz
[ 101.150] (II) intel(0): Modeline "1280x1024"x70.0 128.94 1280 1368
1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz ez)
[ 101.151] (**) intel(0): *Driver mode "1280x1024": 108.0 MHz, 64.0 kHz,
60.0 Hz
[ 101.151] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz ez)
[ 101.151] (**) intel(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz,
75.0 Hz
[ 101.151] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz zd)
[ 101.151] (**) intel(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz,
60.0 Hz
[ 101.151] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz zd)
[ 101.151] (**) intel(0): *Driver mode "1440x900": 106.5 MHz, 55.9 kHz,
59.9 Hz
[ 101.151] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520
1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz ez)
[ 101.151] (**) intel(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz,
60.0 Hz
[ 101.151] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376
1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz zd)
[ 101.151] (**) intel(0): *Driver mode "1280x800": 83.5 MHz, 49.7 kHz,
59.8 Hz
[ 101.151] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352
1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz ez)
[ 101.151] (**) intel(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz,
75.0 Hz
[ 101.151] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz zd)
[ 101.151] (**) intel(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz,
75.0 Hz
[ 101.151] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz ez)
[ 101.151] (**) intel(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz,
70.1 Hz
[ 101.151] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz ez)
[ 101.151] (**) intel(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz,
60.0 Hz
[ 101.151] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz ez)
[ 101.151] (**) intel(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz,
75.0 Hz
[ 101.151] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz zd)
[ 101.151] (**) intel(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz,
70.1 Hz
[ 101.151] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz zd)
[ 101.152] (**) intel(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz,
60.0 Hz
[ 101.152] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
[ 101.152] (**) intel(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz,
74.6 Hz
[ 101.152] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928
1152 624 625 628 667 -hsync -vsync (49.7 kHz zd)
[ 101.152] (**) intel(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz,
75.0 Hz
[ 101.152] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz ez)
[ 101.152] (**) intel(0): *Driver mode "800x600": 50.0 MHz, 48.1 kHz,
72.2 Hz
[ 101.152] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976
1040 600 637 643 666 +hsync +vsync (48.1 kHz ez)
[ 101.152] (**) intel(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz,
60.3 Hz
[ 101.152] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz ez)
[ 101.152] (**) intel(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz,
75.0 Hz
[ 101.152] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz zd)
[ 101.152] (**) intel(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz,
72.2 Hz
[ 101.152] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976
1040 600 637 643 666 +hsync +vsync (48.1 kHz zd)
[ 101.152] (**) intel(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz,
60.3 Hz
[ 101.152] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz zd)
[ 101.152] (**) intel(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz,
75.0 Hz
[ 101.152] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz ez)
[ 101.152] (**) intel(0): *Driver mode "640x480": 31.5 MHz, 37.9 kHz,
72.8 Hz
[ 101.152] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704
832 480 489 492 520 -hsync -vsync (37.9 kHz ez)
[ 101.152] (**) intel(0): *Driver mode "640x480": 30.2 MHz, 35.0 kHz,
66.7 Hz
[ 101.152] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768
864 480 483 486 525 -hsync -vsync (35.0 kHz ez)
[ 101.152] (**) intel(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz,
59.9 Hz
[ 101.153] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz ez)
[ 101.153] (**) intel(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz,
75.0 Hz
[ 101.153] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz zd)
[ 101.153] (**) intel(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz,
72.8 Hz
[ 101.153] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704
832 480 489 492 520 -hsync -vsync (37.9 kHz zd)
[ 101.153] (**) intel(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz,
59.9 Hz
[ 101.153] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz zd)
[ 101.153] (**) intel(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz,
70.1 Hz
[ 101.153] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz ez)
[ 101.153] (**) intel(0): Display dimensions: (430, 270) mm
[ 101.153] (**) intel(0): DPI set to (99, 98)
[ 101.153] (II) Loading sub module "fb"
[ 101.153] (II) LoadModule: "fb"
[ 101.156] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 101.166] (II) Module fb: vendor="X.Org Foundation"
[ 101.166] compiled for 1.14.3, module version = 1.0.0
[ 101.166] ABI class: X.Org ANSI C Emulation, version 0.4
[ 101.166] (II) Loading sub module "ramdac"
[ 101.166] (II) LoadModule: "ramdac"
[ 101.166] (II) Module "ramdac" already built-in
[ 101.166] (**) intel(0): page flipping disabled
[ 101.166] (II) intel(0): XvMC is Disabled: use XvMCSurfaces config
option to enable.
[ 101.167] (II) UnloadModule: "vesa"
[ 101.167] (II) Unloading vesa
[ 101.187] drmOpenDevice: node name is /dev/drm0
[ 101.187] drmOpenDevice: open result is -1, (Device not configured)
[ 101.188] drmOpenDevice: node name is /dev/drm0
[ 101.188] drmOpenDevice: open result is -1, (Device not configured)
[ 101.188] [drm] failed to load kernel module "i810"
[ 101.188] (EE) [drm] drmOpen failed.
[ 101.188] (EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
[ 101.189] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 101.252] (II) intel(0): Setting dot clock to 146.0 MHz [ 0x47 0xa 0x20
] [ 73 12 2 ]
[ 101.265] (II) intel(0): chose watermark 0x22415000: (tab.freq 157.5)
[ 101.376] (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00000000
(pgoffset 0)
[ 101.505] (WW) intel(0): xf86AllocateGARTMemory: allocation of 1024
pages failed
(Cannot allocate memory)
[ 101.505] (II) intel(0): No physical memory available for 4194304 bytes
of DCACHE
[ 101.505] (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01800000
(pgoffset 6144)
[ 101.505] (II) intel(0): Allocated of 4096 bytes for HW cursor
[ 101.505] (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01801000
(pgoffset 6145)
[ 101.505] (II) intel(0): Allocated of 16384 bytes for ARGB HW cursor
[ 101.505] (II) intel(0): Adding 384 scanlines for pixmap caching
[ 101.505] (II) intel(0): Allocated Scratch Memory
[ 101.516] (==) intel(0): Backing store disabled
[ 101.516] (==) intel(0): Silken mouse disabled
[ 101.548] (==) intel(0): DPMS enabled
[ 101.554] (WW) intel(0): Direct rendering disabled
[ 101.564] (==) RandR enabled
[ 101.626] (II) AIGLX: Screen 0 is not DRI2 capable
[ 101.632] (II) AIGLX: Screen 0 is not DRI capable
[ 101.921] (II) AIGLX: Loaded and initialized swrast
[ 101.921] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 102.884] (II) config/wscons: checking input device /dev/wskbd
[ 102.884] (II) wskbd: using layout es
[ 102.884] (II) LoadModule: "kbd"
[ 102.887] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 102.923] (II) Module kbd: vendor="X.Org Foundation"
[ 102.923] compiled for 1.14.3, module version = 1.8.0
[ 102.923] Module class: X.Org XInput Driver
[ 102.923] ABI class: X.Org XInput driver, version 19.1
[ 102.923] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 102.923] (**) /dev/wskbd: always reports core events
[ 102.923] (**) /dev/wskbd: always reports core events
[ 102.923] (**) Option "Protocol" "standard"
[ 102.923] (**) Option "XkbRules" "base"
[ 102.923] (**) Option "XkbModel" "pc105"
[ 102.923] (**) Option "XkbLayout" "es"
[ 102.924] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 103.293] (II) config/wscons: checking input device /dev/wsmouse
[ 103.293] (II) LoadModule: "ws"
[ 103.296] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 103.312] (II) Module ws: vendor="X.Org Foundation"
[ 103.312] compiled for 1.14.3, module version = 1.3.0
[ 103.312] Module class: X.Org XInput Driver
[ 103.312] ABI class: X.Org XInput driver, version 19.1
[ 103.312] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 103.312] (**) /dev/wsmouse: always reports core events
[ 103.312] (II) ws: /dev/wsmouse: debuglevel 0
[ 103.312] (**) Option "Device" "/dev/wsmouse"
[ 103.312] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 103.312] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 103.313] (**) ws: /dev/wsmouse: associated screen: 0
[ 103.313] (II) ws: /dev/wsmouse: minimum x position: 0
[ 103.313] (II) ws: /dev/wsmouse: maximum x position: 1679
[ 103.313] (II) ws: /dev/wsmouse: minimum y position: 0
[ 103.313] (II) ws: /dev/wsmouse: maximum y position: 1049
[ 103.313] (==) ws: /dev/wsmouse: Buttons: 7
[ 103.352] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 103.352] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 7)
[ 103.353] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 103.353] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 103.353] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 103.353] (**) /dev/wsmouse: (accel) acceleration threshold: 4
*dmesg File 5.6*
OpenBSD 5.6 (GENERIC) #274: Fri Aug 8 00:05:13 MDT 2014
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 931 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE,PERF
real mem = 401043456 (382MB)
avail mem = 382042112 (364MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/20/00, BIOS32 rev. 0 @ 0xfd87d,
SMBIOS rev. 2.2 @ 0xe4010 (42 entries)
bios0: vendor Phoenix Technologies Ltd. version "IP.01.03SP" date 06/20/2000
bios0: Hewlett-Packard HP Vectra
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP
acpi0: wakeup devices KBC0(S4) MSE0(S4) COMA(S5) COMB(S5) LAN_(S5) HUB_(S5)
USB_(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 1 (HUB_)
acpicpu0 at acpi0: C2
acpibat0 at acpi0: BBU_ not present
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xa000 0xca000/0x1000 0xe0000/0x4000!
0xe4000/0xc000!
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82815 Video" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xf0000000, size 0x4000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
cmpci0 at pci1 dev 0 function 0 "C-Media Electronics CMI8738/C3DX Audio"
rev 0x10: irq 5
audio0 at cmpci0
opl at cmpci0 not configured
mpu at cmpci0 not configured
xl0 at pci1 dev 4 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5,
address 00:01:03:02:13:cc
bmtphy0 at xl0 phy 24: 3C905C internal PHY, rev. 7
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST380011A>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LITEON, CD-ROM LTN485S, JKF1> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801AA SMBus" rev 0x02: irq 9
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 256MB SDRAM non-parity PC133CL2
spdmem1 at iic0 addr 0x51: 128MB SDRAM non-parity PC100CL2
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Genius 2.4G Wireless
Mouse and Keyboard" rev 1.10/4.27 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Genius 2.4G Wireless
Mouse and Keyboard" rev 1.10/4.27 addr 2
uhidev1: iclass 3/1, 5 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 5: input=0, output=0, feature=7
umass0 at uhub0 port 2 configuration 1 interface 0 "USB2.0 External Mass
Storage Device" rev 2.00/9.28 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
cd1 at scsibus2 targ 1 lun 0: <LITE-ON, DVDRW SHW-160P6S, PS0B> SCSI0
5/cdrom removable serial.0ecda100DEF10C8802E8
uhidev2 at uhub0 port 2 configuration 1 interface 1 "USB2.0 External Mass
Storage Device" rev 2.00/9.28 addr 3
uhidev2: iclass 3/0
uhid3 at uhidev2: input=2, output=2, feature=0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on wd0a (1e38940f5a14f2d7.a) swap on wd0b dump on wd0b
*XORG LOG FILE WITH OPENBSD 5.6*
[ 35.119] (--) checkDevMem: using aperture driver /dev/xf86
[ 35.138] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility
mode (version 3.32)
[ 35.243]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 35.243] X Protocol Version 11, Revision 0
[ 35.243] Build Operating System: OpenBSD 5.6 i386
[ 35.243] Current Operating System: OpenBSD fabiola.cantv.net 5.6
GENERIC#274 i386
[ 35.244] Build Date: 06 August 2014 02:06:01PM
[ 35.244]
[ 35.244] Current version of pixman: 0.32.6
[ 35.244] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 35.244] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 35.245] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 10
21:31:54 2014
[ 35.307] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 35.316] (==) No Layout section. Using the first Screen section.
[ 35.316] (==) No screen section available. Using defaults.
[ 35.316] (**) |-->Screen "Default Screen Section" (0)
[ 35.316] (**) | |-->Monitor "<default monitor>"
[ 35.326] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 35.326] (==) Disabling SIGIO handlers for input devices
[ 35.335] (==) Automatically adding devices
[ 35.335] (==) Automatically enabling devices
[ 35.335] (==) Not automatically adding GPU devices
[ 35.480] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 35.480] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 35.480] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 35.489] (II) Loader magic: 0x39f89880
[ 35.489] (II) Module ABI versions:
[ 35.489] X.Org ANSI C Emulation: 0.4
[ 35.489] X.Org Video Driver: 15.0
[ 35.489] X.Org XInput driver : 20.0
[ 35.489] X.Org Server Extension : 8.0
[ 35.496] (--) PCI:*(0:0:2:0) 8086:1132:103c:1245 rev 2, Mem @
0xf0000000/67108864, 0xec000000/524288
[ 35.498] Initializing built-in extension Generic Event Extension
[ 35.498] Initializing built-in extension SHAPE
[ 35.498] Initializing built-in extension MIT-SHM
[ 35.498] Initializing built-in extension XInputExtension
[ 35.498] Initializing built-in extension XTEST
[ 35.498] Initializing built-in extension BIG-REQUESTS
[ 35.498] Initializing built-in extension SYNC
[ 35.498] Initializing built-in extension XKEYBOARD
[ 35.498] Initializing built-in extension XC-MISC
[ 35.499] Initializing built-in extension SECURITY
[ 35.499] Initializing built-in extension XINERAMA
[ 35.499] Initializing built-in extension XFIXES
[ 35.499] Initializing built-in extension RENDER
[ 35.499] Initializing built-in extension RANDR
[ 35.499] Initializing built-in extension COMPOSITE
[ 35.499] Initializing built-in extension DAMAGE
[ 35.499] Initializing built-in extension MIT-SCREEN-SAVER
[ 35.499] Initializing built-in extension DOUBLE-BUFFER
[ 35.499] Initializing built-in extension RECORD
[ 35.500] Initializing built-in extension DPMS
[ 35.500] Initializing built-in extension Present
[ 35.500] Initializing built-in extension X-Resource
[ 35.500] Initializing built-in extension XVideo
[ 35.500] Initializing built-in extension XVideo-MotionCompensation
[ 35.500] Initializing built-in extension XFree86-VidModeExtension
[ 35.500] Initializing built-in extension XFree86-DGA
[ 35.500] Initializing built-in extension XFree86-DRI
[ 35.500] Initializing built-in extension DRI2
[ 35.501] (II) LoadModule: "glx"
[ 35.540] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 35.551] (II) Module glx: vendor="X.Org Foundation"
[ 35.551] compiled for 1.15.2, module version = 1.0.0
[ 35.551] ABI class: X.Org Server Extension, version 8.0
[ 35.551] (==) AIGLX enabled
[ 35.551] Loading extension GLX
[ 35.552] (==) Matched intel as autoconfigured driver 0
[ 35.552] (==) Matched vesa as autoconfigured driver 1
[ 35.552] (==) Assigned the driver to the xf86ConfigLayout
[ 35.552] (II) LoadModule: "intel"
[ 35.553] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 35.611] (II) Module intel: vendor="X.Org Foundation"
[ 35.611] compiled for 1.15.2, module version = 2.99.910
[ 35.611] Module class: X.Org Video Driver
[ 35.611] ABI class: X.Org Video Driver, version 15.0
[ 35.611] (II) LoadModule: "vesa"
[ 35.613] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 35.621] (II) Module vesa: vendor="X.Org Foundation"
[ 35.621] compiled for 1.15.2, module version = 2.3.3
[ 35.621] Module class: X.Org Video Driver
[ 35.621] ABI class: X.Org Video Driver, version 15.0
[ 35.621] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 35.622] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 35.622] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 35.622] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 35.622] (II) VESA: driver for VESA chipsets: vesa
[ 35.625] (WW) Falling back to old probe method for vesa
[ 35.626] (II) Loading sub module "vgahw"
[ 35.626] (II) LoadModule: "vgahw"
[ 35.631] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[ 35.644] (II) Module vgahw: vendor="X.Org Foundation"
[ 35.644] compiled for 1.15.2, module version = 0.1.0
[ 35.644] ABI class: X.Org Video Driver, version 15.0
[ 35.644] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 16/16
[ 35.644] (==) intel(0): Depth 16, (==) framebuffer bpp 16
[ 35.644] (==) intel(0): RGB weight 565
[ 35.644] (==) intel(0): Default visual is TrueColor
[ 35.645] (II) Loading sub module "xaa"
[ 35.645] (II) LoadModule: "xaa"
[ 35.692] (WW) Warning, couldn't open module xaa
[ 35.692] (II) UnloadModule: "xaa"
[ 35.692] (II) Unloading xaa
[ 35.692] (EE) intel: Failed to load module "xaa" (module does not
exist, 0)
[ 35.692] (II) Loading sub module "vbe"
[ 35.692] (II) LoadModule: "vbe"
[ 35.695] (II) Loading /usr/X11R6/lib/modules/libvbe.so
[ 35.731] (II) Module vbe: vendor="X.Org Foundation"
[ 35.731] compiled for 1.15.2, module version = 1.1.0
[ 35.731] ABI class: X.Org Video Driver, version 15.0
[ 35.731] (II) Loading sub module "int10"
[ 35.731] (II) LoadModule: "int10"
[ 35.735] (II) Loading /usr/X11R6/lib/modules/libint10.so
[ 35.736] (II) Module int10: vendor="X.Org Foundation"
[ 35.736] compiled for 1.15.2, module version = 1.0.0
[ 35.736] ABI class: X.Org Video Driver, version 15.0
[ 35.736] (II) intel(0): initializing int10
[ 35.742] (II) intel(0): Primary V_BIOS segment is: 0xc000
[ 35.744] (II) intel(0): VESA BIOS detected
[ 35.744] (II) intel(0): VESA VBE Version 3.0
[ 35.744] (II) intel(0): VESA VBE Total Mem: 1024 kB
[ 35.744] (II) intel(0): VESA VBE OEM: Intel(R) 815 Chipset Video BIOS
[ 35.744] (II) intel(0): VESA VBE OEM Software Rev: 4.1
[ 35.744] (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
[ 35.744] (II) intel(0): VESA VBE OEM Product: Intel(R) 815 Chipset
[ 35.744] (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[ 35.769] (II) intel(0): VESA VBE DDC supported
[ 35.769] (II) intel(0): VESA VBE DDC Level 2
[ 35.769] (II) intel(0): VESA VBE DDC transfer in appr. 1 sec.
[ 36.349] (II) intel(0): VESA VBE DDC read successfully
[ 36.371] (II) intel(0): Manufacturer: HKC Model: 222 Serial#: 2
[ 36.371] (II) intel(0): Year: 2008 Week: 13
[ 36.371] (II) intel(0): EDID Version: 1.3
[ 36.371] (II) intel(0): Analog Display Input, Input Voltage Level:
0.700/0.700 V
[ 36.371] (II) intel(0): Sync:
[ 36.371] (II) intel(0): Max Image Size [cm]: horiz.: 43 vert.: 27
[ 36.371] (II) intel(0): Gamma: 2.20
[ 36.371] (II) intel(0): DPMS capabilities: StandBy Suspend Off;
RGB/Color Display
[ 36.372] (II) intel(0): First detailed timing is preferred mode
[ 36.372] (II) intel(0): redX: 0.597 redY: 0.343 greenX: 0.316 greenY:
0.566
[ 36.372] (II) intel(0): blueX: 0.153 blueY: 0.131 whiteX: 0.313
whiteY: 0.329
[ 36.372] (II) intel(0): Supported established timings:
[ 36.372] (II) intel(0): 720x400@70Hz
[ 36.372] (II) intel(0): 640x480@60Hz
[ 36.372] (II) intel(0): 640x480@67Hz
[ 36.372] (II) intel(0): 640x480@72Hz
[ 36.372] (II) intel(0): 640x480@75Hz
[ 36.372] (II) intel(0): 800x600@60Hz
[ 36.372] (II) intel(0): 800x600@72Hz
[ 36.372] (II) intel(0): 800x600@75Hz
[ 36.372] (II) intel(0): 1024x768@60Hz
[ 36.372] (II) intel(0): 1024x768@70Hz
[ 36.372] (II) intel(0): 1024x768@75Hz
[ 36.372] (II) intel(0): 1280x1024@75Hz
[ 36.372] (II) intel(0): Manufacturer's mask: 0
[ 36.372] (II) intel(0): Supported standard timings:
[ 36.372] (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid:
129
[ 36.372] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 36.372] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 70 vid:
35457
[ 36.372] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid:
149
[ 36.372] (II) intel(0): Supported detailed timing:
[ 36.372] (II) intel(0): clock: 146.0 MHz Image Size: 433 x 270 mm
[ 36.372] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960
h_blank_end 2240 h_border: 0
[ 36.372] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059
v_blanking: 1089 v_border: 0
[ 36.372] (II) intel(0): Ranges: V min: 60 V max: 76 Hz, H min: 31 H
max: 96 kHz, PixClock max 215 MHz
[ 36.372] (II) intel(0): Monitor name:
[ 36.372] (II) intel(0): Serial No: 200804220001
[ 36.372] (II) intel(0): EDID (in hex):
[ 36.373] (II) intel(0): 00ffffffffffff002163220202000000
[ 36.373] (II) intel(0): 0d120103602b1b78eaf0659857519127
[ 36.373] (II) intel(0): 215054bdcf0081008180818a95000101
[ 36.373] (II) intel(0): 01010101010108399030621a274068b0
[ 36.373] (II) intel(0): 3600b10e1100001c000000fd003c4c1f
[ 36.373] (II) intel(0): 6015000a202020202020000000fc000a
[ 36.373] (II) intel(0): 202020202020202020202020000000ff
[ 36.373] (II) intel(0): 003230303830343232303030310a0086
[ 36.373] (II) intel(0): EDID vendor "HKC", prod id 546
[ 36.378] (II) intel(0): Using EDID range info for horizontal sync
[ 36.378] (II) intel(0): Using EDID range info for vertical refresh
[ 36.378] (II) intel(0): Printing DDC gathered Modelines:
[ 36.379] (II) intel(0): Modeline "1680x1050"x0.0 146.00 1680 1784
1960 2240 1050 1053 1059 1089 -hsync +vsync (65.2 kHz eP)
[ 36.379] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 36.379] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 36.379] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 36.379] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 36.379] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 36.379] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 36.379] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 36.379] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 36.379] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 36.379] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 36.379] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 36.379] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976
1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 36.380] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480
1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 36.380] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 36.380] (II) intel(0): Modeline "1280x1024"x70.0 128.94 1280 1368
1504 1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[ 36.380] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672
1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 36.380] (--) intel(0): Integrated Graphics Chipset: Intel(R) i815
[ 36.380] (--) intel(0): Linear framebuffer at 0xF0000000
[ 36.380] (--) intel(0): IO registers at addr 0xEC000000
[ 36.380] (EE) intel(0): AGP GART support is not available. Make sure
your kernel has
agpgart support or that the agpgart kernel module is loaded.
[ 36.381] (II) UnloadModule: "intel"
[ 36.381] (II) UnloadSubModule: "int10"
[ 36.381] (II) Unloading int10
[ 36.381] (II) UnloadSubModule: "vbe"
[ 36.381] (II) Unloading vbe
[ 36.381] (II) UnloadSubModule: "vgahw"
[ 36.381] (II) Unloading vgahw
[ 36.381] (EE) Screen(s) found, but none have a usable configuration.
[ 36.381] (EE)
Fatal server error:
[ 36.381] (EE) no screens found(EE)
[ 36.382] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 36.382] (EE) Please also check the log file at "/var/log/Xorg.0.log"
for additional information.
[ 36.382] (EE)
[ 36.384] (EE) Server terminated with error (1). Closing log file.
In the case of 5.4 xorg just works out of the box. I really don't know what
is missing. Please excuseme the long mail but I wanna know if this can get
fix !!
thnks !!
