It took a few days, back and forth, as time permitted, but I have this old
blade, with two 15 GB drives, and 2 GB RAM running nicely with OpenBSD
5.6. I think that I have the RELEASE version. I have installed apline
mailer, firefox, R, nano, python, anjuta.
It's pretty good. I am trying to support your efforts a bit; I bought
the book by Lucas, and I setup a small monthly donation to the OpenBSD
foundation. I use this machine purely for pleasure. I am so impressed
with what OpenBSD has accomplished.
Richard Thornton
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.6 (GENERIC) #187: Fri Aug 8 04:09:36 MDT 2014
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 2147483648 (2048MB)
avail mem = 2098364416 (2001MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Blade 100 (UltraSPARC-IIe)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 502 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64
b/l)
psycho0 at mainbus0: pci108e,a001, impl 0, version 0, ign 7c0
psycho0: bus range 0-1, PCI bus 0
psycho0: dvma map c0000000-dfffffff
pci0 at psycho0
ebus0 at pci0 dev 12 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-fffff not configured
clock1 at ebus0 addr 0-1fff: mk48t59
ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"dma" at ebus1 addr 0-ffff ivec 0x2a not configured
power0 at ebus1 addr 800-82f ivec 0x20
com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
gem0 at pci0 dev 12 function 1 "Sun ERI Ether" rev 0x01: ivec 0x7c6, address
00:03:ba:09:31:14
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0010dd, model 0x0002
"Sun FireWire" rev 0x01 at pci0 dev 12 function 2 not configured
ohci0 at pci0 dev 12 function 3 "Sun USB" rev 0x01: ivec 0x7e4, version 1.0,
legacy support
alipm0 at pci0 dev 3 function 0 "Acer Labs M7101 Power" rev 0x00: 223KHz clock
iic0 at alipm0
"max1617" at alipm0 addr 0x18 skipped due to alipm0 bugs
"scm001" at alipm0 addr 0x20 skipped due to alipm0 bugs
spdmem0 at iic0 addr 0x50: 512MB SDRAM ECC PC133CL2
spdmem1 at iic0 addr 0x51: 512MB SDRAM ECC PC133CL2
spdmem2 at iic0 addr 0x52: 512MB SDRAM ECC PC133CL2
spdmem3 at iic0 addr 0x53: 512MB SDRAM ECC PC133CL2
autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x01: ivec 0x7e3
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST315310A>
wd0: 16-sector PIO, LBA, 14594MB, 29888820 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LITEON, CD-ROM LTN486S, YSU1> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <ST315310A>
wd1: 16-sector PIO, LBA, 14594MB, 29888820 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
machfb0 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27
machfb0: ATY,RageXL, 1152x900
wsdisplay0 at machfb0 mux 1: console (std, sun emulation)
ppb0 at pci0 dev 5 function 0 "DEC 21152" rev 0x03
pci1 at ppb0 bus 1
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Fujitsu Component Type 6
Mouse" rev 1.00/1.02 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 4 configuration 1 interface 0 "Fujitsu Component Type 6
Keyboard" rev 1.00/1.02 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes, country code 33
wskbd0 at ukbd0: console keyboard, using wsdisplay0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@1f,0/ide@d,0/disk@0,0
root on wd0a (a59c0b8c1e741807.a) swap on wd0b dump on wd0b
