Hi,
I have this USB hub, which is connected to my desktop
PC; it makes the USB ports accessible w/o need to crawl
under the desk. I'll seldom need to transfer files (to/fro)
with a USB stick, which I plug into one of the hub ports.
I don't quite recall when it was last used. But with 2014-NOV-21
snapshot it doesn't seem to work.
OpenBSD 5.6-current (GENERIC) #563: Fri Nov 21 10:09:03 MST 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
Plug it in, and it is detected:
uhub5 at uhub0 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 3
Plug in a USB mem-stick and nothing.
Unplug the USB stick from hub: nothing.
Unplug hub from computer's USB port:
uhub5 detached
Plug the USB stick directly into the same USB port on the
computer:
umass0 at uhub0 port 1 configuration 1 interface 0 "Kingston DT 101
G2" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <Kingston, DT 101 G2, PMAP> SCSI0
0/direct removable serial.09511EFEFA5100000245
sd1: 7640MB, 512 bytes/sector, 15646720 sectors
Note, that above is pulled from a Gateway LT31 netbook,
b/c of easier access, and b/c w/2014-SEP-09 snapshot, the
unplugging of the USB stick (or any other USB device) from
the USB hub would dump into ddb.
Unfortunately I couldn't gather much info from ddb as my
USB keyboard wouldn't respond, also, I wanted to try with
a newer -current, which doesn't seem to trigger the crash
(at least on this netbook it does not).
The crash, from memory, was in usb_allocmem().
Regardless, am I missing something with respect to the
hub not working, or did something break?
Plugging the USB hub into an OSX running MacBook Pro
seems to work as expected. USB mem-stick shows up
on "desktop" and files stored within can be accessed.
Thoughts?
--patrick
OpenBSD 5.6-current (GENERIC) #563: Fri Nov 21 10:09:03 MST 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1861025792 (1774MB)
avail mem = 1807745024 (1724MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf1010 (17 entries)
bios0: vendor Phoenix Technologies LTD version "v1.3307" date 05/31/2010
bios0: Gateway LT31
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET BOOT SLIC
acpi0: wakeup devices PB5_(S5) OHC1(S3) OHC2(S3) EHCI(S3) HDAU(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) Processor L110, 1197.20 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,SVM,EAPICSP,AMCR8,3DNOWP
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-8
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB3_)
acpiprt2 at acpi0: bus -1 (PB4_)
acpiprt3 at acpi0: bus 3 (PB5_)
acpiprt4 at acpi0: bus 4 (PB6_)
acpiprt5 at acpi0: bus -1 (PB7_)
acpiprt6 at acpi0: bus 9 (P2P_)
acpiprt7 at acpi0: bus 1 (AGP_)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature is 100 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "UM09A41" serial 22962 type LION oem "SONY"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "ATI RS690 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "ATI RS690 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Radeon X1250 IGP" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
ppb1 at pci0 dev 5 function 0 "ATI RS690 PCIE" rev 0x00: msi
pci2 at ppb1 bus 3
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL
(0x2480), msi, address 00:23:8b:ef:ef:ef
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb2 at pci0 dev 6 function 0 "ATI RS690 PCIE" rev 0x00: msi
pci3 at ppb2 bus 4
ral0 at pci3 dev 0 function 0 "Ralink RT3090" rev 0x00: apic 1 int 18,
address 00:24:1d:f4:3d:86
ral0: MAC/BBP RT3071 (rev 0x0213), RF RT3020 (MIMO 1T1R)
ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 1 int
22, AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS545050A7, GG2O> SCSI3
0/direct fixed naa.5000cca71eed589f
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 1 int
16, version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 1 int
17, version 1.0, legacy support
ohci2 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 1 int
17, version 1.0, legacy support
ohci3 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 1 int
18, version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x14: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 1 int 16
azalia0: codecs: Realtek ALC272
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci4 at ppb3 bus 9
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00:
core rev DH-G2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Chicony
Electronics Co., Ltd. CNF9011" rev 2.00/13.57 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (c6730199949bc08f.a) swap on sd0b dump on sd0b
drm: initializing kernel modesetting (RS690 0x1002:0x791F 0x1025:0x028C).
radeondrm0: VRAM: 256M 0x0000000070000000 - 0x000000007FFFFFFF (256M used)
radeondrm0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
drm: PCIE GART of 512M enabled (table at 0x0000000004ABE000).
error: [drm:pid0:r100_ring_test] *ERROR* radeon: ring test failed
(scratch(0x15E4)=0xCAFEDEAD)
error: [drm:pid0:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
error: [drm:pid0:rs690_startup] *ERROR* failed initializing CP (-22).
error: [drm:pid0:rs690_init] *ERROR* Disabling GPU acceleration
error: [drm:pid0:r100_cp_fini] *ERROR* Wait for CP idle timeout,
shutting down CP.
error: [drm:pid0:r100_cp_disable] *ERROR* Failed to wait GUI idle
while programming pipes. Bad things might happen.
drm: radeon: cp finalized
radeondrm0: 1366x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
