Hi -
Since upgrading to 5.6, I am having problems to detect my Brother USB
printer in CUPS.
The problem is that the printer is not found by the 'usb' backend:
# /usr/local/libexec/cups/backend/usb
DEBUG: Loading USB quirks from "/usr/local/share/cups/usb".
DEBUG: Loaded 68 quirks.
DEBUG: list_devices
DEBUG: libusb_get_device_list=8
DEBUG: Failed to check whether 04f9:001a has the "usblp" kernel module
attached
The error looks suspicious, though I did not find anything useful about
it googling the web (it seems to be an error caused by libusb).
The printer does show up in usbdevs -vd:
# usbdevs -vd
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
RDC(0x17f3), rev 1.00
uhub0
port 1 powered
port 2 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
RDC(0x17f3), rev 1.00
uhub1
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
RDC(0x17f3), rev 1.00
uhub2
port 1 powered
port 2 addr 2: full speed, self powered, config 1, product
0x001a(0x001a), Brother Industries(0x04f9), rev 1.00
ugen0
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
RDC(0x17f3), rev 1.00
uhub3
port 1 powered
port 2 addr 2: full speed, power 100 mA, config 1, Logitech BT
Mini-Receiver(0x0b04), Logitech(0x046d), rev 49.00
uhub4
port 1 powered
port 2 addr 3: full speed, power 98 mA, config 1, Logitech BT
Mini-Receiver(0xc713), Logitech(0x046d), rev 49.00, iSerialNumber
001F203C2558
uhidev0
port 3 addr 4: full speed, power 98 mA, config 1, Logitech BT
Mini-Receiver(0xc714), Logitech(0x046d), rev 49.00, iSerialNumber
001F203C2558
uhidev1
As explained in the pkg-readme, I have disabled the ulpt driver in the
kernel, as well as changed the ownership of the devices:
# ls -la /dev/usb2 /dev/ugen0.*
crw-rw---- 1 _cups wheel 63, 0 Nov 21 19:35 /dev/ugen0.00
crw-rw---- 1 _cups wheel 63, 1 Nov 21 19:35 /dev/ugen0.01
crw-rw---- 1 _cups wheel 63, 2 Nov 21 19:35 /dev/ugen0.02
crw-rw---- 1 _cups wheel 63, 3 Nov 21 19:35 /dev/ugen0.03
crw-rw---- 1 _cups wheel 63, 4 Nov 21 19:35 /dev/ugen0.04
crw-rw---- 1 _cups wheel 63, 5 Nov 21 19:35 /dev/ugen0.05
crw-rw---- 1 _cups wheel 63, 6 Nov 21 19:35 /dev/ugen0.06
crw-rw---- 1 _cups wheel 63, 7 Nov 21 19:35 /dev/ugen0.07
crw-rw---- 1 _cups wheel 63, 8 Nov 21 19:35 /dev/ugen0.08
crw-rw---- 1 _cups wheel 63, 9 Nov 21 19:35 /dev/ugen0.09
crw-rw---- 1 _cups wheel 63, 10 Nov 21 19:35 /dev/ugen0.10
crw-rw---- 1 _cups wheel 63, 11 Nov 21 19:35 /dev/ugen0.11
crw-rw---- 1 _cups wheel 63, 12 Nov 21 19:35 /dev/ugen0.12
crw-rw---- 1 _cups wheel 63, 13 Nov 21 19:35 /dev/ugen0.13
crw-rw---- 1 _cups wheel 63, 14 Nov 21 19:35 /dev/ugen0.14
crw-rw---- 1 _cups wheel 63, 15 Nov 21 19:35 /dev/ugen0.15
crw-rw---- 1 _cups wheel 61, 2 Nov 21 19:35 /dev/usb2
Any hints on how to track down my problem would be welcome.
Regards,
Bernd
dmesg:
OpenBSD 5.6 (GENERIC) #2: Tue Oct 28 16:56:54 CET 2014
r...@stable-56-i386.mtier.org:/binpatchng/work-binpatch56-i386/src/sys/arch/i386/compile/GENERIC
cpu0: Vortex86 SoC (586-class) 934 MHz
cpu0: FPU,TSC,CX8,MMX
real mem = 1039691776 (991MB)
avail mem = 1010257920 (963MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/26/10, BIOS32 rev. 0 @ 0xf0010
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2fe0/240 (13 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x17f3 product 0x6036
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "RDC", unknown product 0x6022 rev 0x00
rl0 at pci0 dev 1 function 0 "Realtek 8139" rev 0x10: irq 11, address
44:4d:50:07:1b:19
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci0 dev 2 function 0 "Realtek 8139" rev 0x10: irq 11, address
44:4d:50:07:1b:1a
rlphy1 at rl1 phy 0: RTL internal PHY
pcib0 at pci0 dev 7 function 0 vendor "RDC", unknown product 0x6036 rev 0x00
vte0 at pci0 dev 8 function 0 "RDC R6040 Ethernet" rev 0x00: irq 6,
address 00:1b:eb:25:30:9e
rdcphy0 at vte0 phy 1: R6040 10/100 PHY, rev. 1
ohci0 at pci0 dev 10 function 0 "RDC R6060 USB" rev 0x12: irq 7, version
1.0, legacy support
ehci0 at pci0 dev 10 function 1 "RDC R6061 USB2" rev 0x03: irq 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "RDC EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 11 function 0 "RDC R6060 USB" rev 0x12: irq 5, version
1.0, legacy support
ehci1 at pci0 dev 11 function 1 "RDC R6061 USB2" rev 0x03: irq 9
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "RDC EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 12 function 0 "RDC R1011 IDE" rev 0x01: DMA
(unsupported), channel 0 configured to compatibility, channel 1
configured to compatibility
pciide0: channel 0 ignored (not responding; disabled or no drives?)
wd0 at pciide0 channel 1 drive 0: <SanDisk SDSSDXP120G>
wd0: 1-sector PIO, LBA48, 114473MB, 234441648 sectors
vga1 at pci0 dev 13 function 0 vendor "RDC", unknown product 0x2012 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 14 function 0 "RDC R3010 HDA" rev 0x01: irq 10
azalia0: codecs: Realtek ALC262
audio0 at azalia0
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "RDC OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "RDC OHCI root hub" rev 1.00/1.00 addr 1
ugen0 at uhub2 port 2 "Brother Industries product 0x001a" rev 1.00/1.00
addr 2
uhub4 at uhub3 port 2 "Logitech Logitech BT Mini-Receiver" rev
2.00/49.00 addr 2
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Logitech Logitech
BT Mini-Receiver" rev 2.00/49.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 3 configuration 1 interface 0 "Logitech Logitech
BT Mini-Receiver" rev 2.00/49.00 addr 4
uhidev1: iclass 3/1, 18 report ids
ums0 at uhidev1 reportid 2: 12 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
ums1 at uhidev1 reportid 5: 8 buttons, Z dir
wsmouse1 at ums1 mux 0
uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
uhid4 at uhidev1 reportid 18: input=45, output=45, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (e9660b60d2e0a900.a) swap on wd0b dump on wd0b
ugen0 detached
ugen0 at uhub2 port 2 "Brother Industries product 0x001a" rev 1.00/1.00
addr 2
