unknown ethernet: intel dual-port gig copper

Jim Rowan Sat, 25 Oct 2014 17:37:15 -0700

Hi,

On 5.6 (I haven't tried this with anything older yet) my network cardisn't recognized. It's an intel dual-port gig-e card.

unknown vendor 0x8096 product 0x1010 (class network subclass ethernet,rev 0x11) at pci0 dev 8 function 0 not configured


Can I do something to use this card?



Here's the full dmesg:

OpenBSD 5.6-stable (FLASHRD) #72: Sat Oct 11 13:37:21 MDT 2014
    r...@mina.nmedia.net:/usr/src/sys/arch/i386/compile/FLASHRD
cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz

cpu0:FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,NXE,SSE3,EST,TM2,xTPR

real mem  = 518418432 (494MB)
avail mem = 496074752 (473MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root

bios0 at mainbus0: AT/286+ BIOS, date 01/22/08, BIOS32 rev. 0 @0xfb180, SMBIOS rev. 2.3 @ 0xf0800 (33 entries)bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date01/22/2008

bios0: Neoware Inc. Thin Client
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP

acpi0: wakeup devices PCI0(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3)USB4(S3) USB5(S3) USB6(S3) USB7(S3) LAN0(S5) AC97(S5) UAR1(S5)

acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xda00
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 998 MHz: speeds: 1333, 1067 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
vga1: aperture needed
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

unknown vendor 0x8096 product 0x1010 (class network subclass ethernet,rev 0x11) at pci0 dev 8 function 0 not configuredpciide0 at pci0 dev 15 function 0 "VIA VT82C571 IDE" rev 0x06: ATA133,channel 0 configured to compatibility, channel 1 configured tocompatibility

wd0 at pciide0 channel 0 drive 0: <TS2GCF133>
wd0: 1-sector PIO, LBA, 1911MB, 3915072 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 11
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 5
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 5
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00: SMI
iic0 at viapm0

spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM

auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 10
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0

vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 11,address 00:e0:c5:48:89:d1ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI0x004063, model 0x0032

usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
lm1 at wbsio0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16

uhidev0 at uhub1 port 1 configuration 1 interface 0 "CHICONY USBKeyboard" rev 1.10/1.03 addr 2

uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0

uhidev1 at uhub1 port 1 configuration 1 interface 1 "CHICONY USBKeyboard" rev 1.10/1.03 addr 2

uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 5.6-stable (FLASHRD) #72: Sat Oct 11 13:37:21 MDT 2014
    r...@mina.nmedia.net:/usr/src/sys/arch/i386/compile/FLASHRD
cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz