Machine is a Dell 2950. 2014-04-30 snapshot and new bsd.rd boot fine

>> OpenBSD/amd64 BOOT 3.28
boot>
booting hd0a:/bsd: 10561372+2235930+1045688+0+614336
[100+556344+369943]=0x12ac5b8
entry point at 0x10001e0 [7205c766, 34000004, 24448b12, 1ba0a304]
[ using 927224 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.5-current (GENERIC.MP) #98: Fri May  2 16:21:27 MDT 2014
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34338045952 (32747MB)
avail mem = 33412399104 (31864MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0uvm_fault(0xffffffff8205bc00, 0xffffffff8221c000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at      bios_attach+0x71:       movl    0(%rax),%eax
bios_attach() at bios_attach+0x71
config_attach() at config_attach+0x2ff
config_found_sm() at config_found_sm+0x49
mainbus_attach() at mainbus_attach+0x78
config_attach() at config_attach+0x2ff
config_rootfound() at config_rootfound+0x44
cpu_configure() at cpu_configure+0x1e
main() at main+0x5e4
end trace frame: 0x0, count: 3

ddb{0}> machine ddbcpu 1
Invalid cpu 1


--------------------------------------
05-02 bsd.rd boot:

boot> bsd.rd
booting hd0a:bsd.rd: 4184744+1360149+2920032+0+520640
[100+344520+223635]=0xd1d0c8
entry point at 0x10001e0 [7205c766, 34000004, 24448b12, 45b0a304]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.5-current (RAMDISK_CD) #94: Fri May  2 16:27:25 MDT 2014
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 34338045952 (32747MB)
avail mem = 33418633216 (31870MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x7fb9c000 (67 entries)
bios0: vendor Dell Inc. version "2.7.0" date 10/30/2010
bios0: Dell Inc. PowerEdge 2950
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT
EINJ TCPA SSDT SSDT SSDT SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz, 2992.92 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,F
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 332MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 9 pa 0xfec81000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 9
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (PEX2)
acpiprt2 at acpi0: bus 7 (UPST)
acpiprt3 at acpi0: bus 8 (DWN1)
acpiprt4 at acpi0: bus 10 (DWN2)
acpiprt5 at acpi0: bus 1 (PEX3)
acpiprt6 at acpi0: bus 2 (PE2P)
acpiprt7 at acpi0: bus 12 (PEX4)
acpiprt8 at acpi0: bus 14 (PEX6)
acpiprt9 at acpi0: bus 4 (SBEX)
acpiprt10 at acpi0: bus 16 (COMP)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 6
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 7
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 8
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 9
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 16
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01: msi
pci5 at ppb4 bus 10
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 11
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
ppb7 at pci7 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci8 at ppb7 bus 2
mfi0 at pci8 dev 14 function 0 "Dell PERC 5" rev 0x00: apic 9 int 14
mfi0: "PERC 5/i Integrated", firmware 5.2.2-0072, 256MB cache
scsibus0 at mfi0: 64 targets
sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 5/i, 1.03> SCSI3 0/direct
fixed naa.60019b90c3691800174702a3594f9123
sd0: 3574400MB, 512 bytes/sector, 7320371200 sectors
ppb8 at pci7 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci9 at ppb8 bus 3
ppb9 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x12: msi
pci10 at ppb9 bus 12
ppb10 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
ppb11 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x12: msi
pci12 at ppb11 bus 14
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci13 at ppb12 bus 15
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci14 at ppb13 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 8 int 21
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 8 int 20
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 8 int 21
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 8 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb14 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci15 at ppb14 bus 16
vga1 at pci15 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 6321ESB LPC" rev 0x09 at pci0 dev 31 function 0 not configured
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, CDRW/DVD TSL462D, DE01> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
uhub4 at uhub0 port 1 "vendor 0x413c product 0xa001" rev 2.00/0.00 addr 2
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Dell DRAC5" rev
1.10/0.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Dell DRAC5" rev
1.10/0.00 addr 3
uhidev1: iclass 3/1
uhid at uhidev1 not configured
umass0 at uhub4 port 2 configuration 1 interface 0 "DELL  INC. DRAC5
VIRTUAL  MEDIA" rev 2.00/0.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
cd1 at scsibus2 targ 1 lun 0: <Dell, Virtual CDROM, 123> SCSI0 5/cdrom
removable serial.413c00011028_123456
umass1 at uhub4 port 2 configuration 1 interface 1 "DELL  INC. DRAC5
VIRTUAL  MEDIA" rev 2.00/0.00 addr 4
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <Dell, Virtual Floppy, 123> SCSI0
0/direct removable serial.413c00011028_123456
uhub5 at uhub0 port 5 "vendor 0x04b4 product 0x6560" rev 2.00/0.0b addr 5
uhidev2 at uhub2 port 2 configuration 1 interface 0 "American Power
Conversion Smart-UPS 1500 FW:601.3.D USB FW:8.1" rev 1.10/0.06 addr 2
uhidev2: iclass 3/0, 54 report ids
uhid at uhidev2 reportid 1 not configured
uhid at uhidev2 reportid 2 not configured
uhid at uhidev2 reportid 3 not configured
uhid at uhidev2 reportid 4 not configured
uhid at uhidev2 reportid 5 not configured
uhid at uhidev2 reportid 6 not configured
uhid at uhidev2 reportid 7 not configured
uhid at uhidev2 reportid 8 not configured
uhid at uhidev2 reportid 9 not configured
uhid at uhidev2 reportid 10 not configured
uhid at uhidev2 reportid 11 not configured
uhid at uhidev2 reportid 12 not configured
uhid at uhidev2 reportid 13 not configured
uhid at uhidev2 reportid 14 not configured
uhid at uhidev2 reportid 15 not configured
uhid at uhidev2 reportid 16 not configured
uhid at uhidev2 reportid 17 not configured
uhid at uhidev2 reportid 18 not configured
uhid at uhidev2 reportid 19 not configured
uhid at uhidev2 reportid 20 not configured
uhid at uhidev2 reportid 21 not configured
uhid at uhidev2 reportid 22 not configured
uhid at uhidev2 reportid 23 not configured
uhid at uhidev2 reportid 24 not configured
uhid at uhidev2 reportid 25 not configured
uhid at uhidev2 reportid 26 not configured
uhid at uhidev2 reportid 27 not configured
uhid at uhidev2 reportid 28 not configured
uhid at uhidev2 reportid 29 not configured
uhid at uhidev2 reportid 30 not configured
uhid at uhidev2 reportid 31 not configured
uhid at uhidev2 reportid 32 not configured
uhid at uhidev2 reportid 33 not configured
uhid at uhidev2 reportid 34 not configured
uhid at uhidev2 reportid 35 not configured
uhid at uhidev2 reportid 36 not configured
uhid at uhidev2 reportid 37 not configured
uhid at uhidev2 reportid 38 not configured
uhid at uhidev2 reportid 39 not configured
uhid at uhidev2 reportid 40 not configured
uhid at uhidev2 reportid 41 not configured
uhid at uhidev2 reportid 42 not configured
uhid at uhidev2 reportid 43 not configured
uhid at uhidev2 reportid 44 not configured
uhid at uhidev2 reportid 45 not configured
uhid at uhidev2 reportid 46 not configured
uhid at uhidev2 reportid 47 not configured
uhid at uhidev2 reportid 48 not configured
uhid at uhidev2 reportid 49 not configured
uhid at uhidev2 reportid 50 not configured
uhid at uhidev2 reportid 51 not configured
uhid at uhidev2 reportid 52 not configured
uhid at uhidev2 reportid 53 not configured
uhid at uhidev2 reportid 54 not configured
softraid0 at root
scsibus4 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
bnx0: address 00:19:b9:bf:95:b0
brgphy0 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6

--------------------------------------------------
>> OpenBSD/amd64 BOOT 3.28
boot> bsd.sp
booting hd0a:bsd.sp: 10491724+2233914+1043136+0+612160
[100+554112+368464]=0x1298eb8
entry point at 0x10001e0 [7205c766, 34000004, 24448b12, fba0a304]
[ using 923512 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.5-current (GENERIC) #94: Fri May  2 16:18:15 MDT 2014
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 34338045952 (32747MB)
avail mem = 33412481024 (31864MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0uvm_fault(0xffffffff82049c00, 0xffffffff82208000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at      bios_attach+0x71:       movl    0(%rax),%eax
bios_attach() at bios_attach+0x71
config_attach() at config_attach+0x2ff
config_found_sm() at config_found_sm+0x49
mainbus_attach() at mainbus_attach+0x78
config_attach() at config_attach+0x2ff
config_rootfound() at config_rootfound+0x44
cpu_configure() at cpu_configure+0x1e
main() at main+0x59a
end trace frame: 0x0, count: 3

---------------------------------
2014-04-30 snapshot:
OpenBSD 5.5-current (GENERIC.MP) #88: Tue Apr 29 20:20:20 MDT 2014
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34338045952 (32747MB)
avail mem = 33415249920 (31867MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x7fb9c000 (67 entries)
bios0: vendor Dell Inc. version "2.7.0" date 10/30/2010
bios0: Dell Inc. PowerEdge 2950
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT
EINJ TCPA SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz, 2992.92 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,F
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0, IBE
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz, 2992.50 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,F
cpu1: 4MB 64b/line 16-way L2 cache
cpu1: smt 0, core 0, package 3
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz, 2992.50 MHz
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,F
cpu2: 4MB 64b/line 16-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz, 2992.50 MHz
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,F
cpu3: 4MB 64b/line 16-way L2 cache
cpu3: smt 0, core 1, package 3
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 9 pa 0xfec81000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 9
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (PEX2)
acpiprt2 at acpi0: bus 7 (UPST)
acpiprt3 at acpi0: bus 8 (DWN1)
acpiprt4 at acpi0: bus 10 (DWN2)
acpiprt5 at acpi0: bus 1 (PEX3)
acpiprt6 at acpi0: bus 2 (PE2P)
acpiprt7 at acpi0: bus 12 (PEX4)
acpiprt8 at acpi0: bus 14 (PEX6)
acpiprt9 at acpi0: bus 4 (SBEX)
acpiprt10 at acpi0: bus 16 (COMP)
acpicpu0 at acpi0: C1, PSS
acpicpu1 at acpi0: C1, PSS
acpicpu2 at acpi0: C1, PSS
acpicpu3 at acpi0: C1, PSS
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 2992 MHz: speeds: 3000, 2667, 2333, 2000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 6
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 7
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 8
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 9
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 16
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01: msi
pci5 at ppb4 bus 10
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 11
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
ppb7 at pci7 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci8 at ppb7 bus 2
mfi0 at pci8 dev 14 function 0 "Dell PERC 5" rev 0x00: apic 9 int 14
mfi0: "PERC 5/i Integrated", firmware 5.2.2-0072, 256MB cache
scsibus1 at mfi0: 64 targets
sd0 at scsibus1 targ 0 lun 0: <DELL, PERC 5/i, 1.03> SCSI3 0/direct
fixed naa.60019b90c3691800174702a3594f9123
sd0: 3574400MB, 512 bytes/sector, 7320371200 sectors
ppb8 at pci7 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci9 at ppb8 bus 3
ppb9 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x12: msi
pci10 at ppb9 bus 12
ppb10 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
ppb11 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x12: msi
pci12 at ppb11 bus 14
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci13 at ppb12 bus 15
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci14 at ppb13 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 8 int 21
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 8 int 20
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 8 int 21
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 8 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb14 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci15 at ppb14 bus 16
radeondrm0 at pci15 dev 13 function 0 "ATI ES1000" rev 0x02
drm0 at radeondrm0
radeondrm0: apic 8 int 19
pcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <TSSTcorp, CDRW/DVD TSL462D, DE01> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub4 at uhub0 port 1 "Dell product 0xa001" rev 2.00/0.00 addr 2
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Dell DRAC5" rev
1.10/0.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Dell DRAC5" rev
1.10/0.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
umass0 at uhub4 port 2 configuration 1 interface 0 "DELL  INC. DRAC5
VIRTUAL  MEDIA" rev 2.00/0.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
cd1 at scsibus3 targ 1 lun 0: <Dell, Virtual CDROM, 123> SCSI0 5/cdrom
removable serial.413c00011028_123456
umass1 at uhub4 port 2 configuration 1 interface 1 "DELL  INC. DRAC5
VIRTUAL  MEDIA" rev 2.00/0.00 addr 4
umass1: using SCSI over Bulk-Only
scsibus4 at umass1: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <Dell, Virtual Floppy, 123> SCSI0
0/direct removable serial.413c00011028_123456
uhub5 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 5
uhidev2 at uhub2 port 2 configuration 1 interface 0 "American Power
Conversion Smart-UPS 1500 FW:601.3.D USB FW:8.1" rev 1.10/0.06 addr 2
uhidev2: iclass 3/0, 54 report ids
upd0 at uhidev2
vscsi0 at root
scsibus5 at vscsi0: 256 targets
softraid0 at root
scsibus6 at softraid0: 256 targets
root on sd0a (49fddf7906041e4a.a) swap on sd0b dump on sd0b
bnx0: address 00:19:b9:bf:95:b0
brgphy0 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
drm: initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x01B2).
radeondrm0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used)
radeondrm0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
drm: PCI GART of 512M enabled (table at 0x0000000002101000).
radeondrm0: 1280x1024
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)

Reply via email to