Hi,
I hope someone can help me with this...
For some reason my fans are spinning up at 3000RPM and making a lot of
noise. I have a similar chassis m/b combo running FreeBSD 10 which runs
almost silent.
The processor usage on this machine isn't very high at all and is even
being throttled.
Here is what I've done so far:
Enable APMD with the -C option; taken from the man page -
-C Start apmd in cool running performance adjustment mode. In this
mode, when CPU idle time falls below 10%, apmd raises
hw.setperf
as much as necessary. Otherwise when CPU idle time is above
30%,
apmd lowers hw.setperf as much as possible to reduce heat,
noise,
and power consumption.
and also enable SENSORSD....
sysctl output:
hw.sensors.cpu0.temp0=51.00 degC
hw.sensors.cpu1.temp0=51.00 degC
hw.sensors.cpu2.temp0=51.00 degC
hw.sensors.cpu3.temp0=51.00 degC
hw.sensors.lm1.temp0=34.00 degC
hw.sensors.lm1.temp1=57.00 degC
hw.sensors.lm1.temp2=33.50 degC
hw.sensors.lm1.volt0=1.08 VDC (VCore)
hw.sensors.lm1.volt1=12.04 VDC (+12V)
hw.sensors.lm1.volt2=3.36 VDC (+3.3V)
hw.sensors.lm1.volt3=3.36 VDC (+3.3V)
hw.sensors.lm1.volt4=-10.92 VDC (-12V)
hw.sensors.lm1.volt5=1.26 VDC
hw.sensors.lm1.volt6=1.06 VDC
hw.sensors.lm1.volt7=3.33 VDC (3.3VSB)
hw.sensors.lm1.volt8=1.60 VDC (VBAT)
hw.sensors.lm2.temp0=34.00 degC
hw.sensors.lm2.temp1=57.00 degC
hw.sensors.lm2.temp2=33.50 degC
hw.sensors.lm2.fan0=1622 RPM
hw.sensors.lm2.fan1=164 RPM
hw.sensors.lm2.fan2=3013 RPM
hw.sensors.lm2.fan3=2986 RPM
hw.sensors.lm2.fan4=164 RPM
hw.sensors.lm2.volt0=1.08 VDC (VCore)
hw.sensors.lm2.volt1=12.04 VDC (+12V)
hw.sensors.lm2.volt2=3.36 VDC (+3.3V)
hw.sensors.lm2.volt3=3.36 VDC (+3.3V)
hw.sensors.lm2.volt4=-10.92 VDC (-12V)
hw.sensors.lm2.volt5=1.26 VDC
hw.sensors.lm2.volt6=1.06 VDC
hw.sensors.lm2.volt7=3.33 VDC (3.3VSB)
hw.sensors.lm2.volt8=1.60 VDC (VBAT)
hw.cpuspeed=1200
hw.setperf=0
hw.vendor=Supermicro
hw.product=X9SRE/X9SRE-3F/X9SRi/X9SRi-3F
The CPU is a Xeon E5 which the above output tells me it's been downclocked
to 1.2GHz (is rated at 3.7GHz) hooked up to a SuperMicro system board and
4U chassis with 80mm?? fans.
More output:
# apropos fan | grep 4
adl (4) - Andigilog aSC7621 temperature, voltage, and fan sensor
adt (4) - Analog Devices ADT7460 temperature, voltage, and fan sensor
adtfsm (4) - Analog Devices ADT7462 temperature, voltage, and fan sensor
aibs (4) - ASUSTeK AI Booster ACPI ATK0110 temperature, voltage, and fan
sensor
andl (4) - Andigilog aSC7611 temperature, voltage, and fan sensor
fcu (4/macppc) - Apple Fan Control Unit sensor device
glenv (4) - Genesys Logic GL518SM temperature, voltage, and fan sensor
it (4) - ITE IT87xxF and SiS SiS950 temperature, voltage, and fan sensor
with watchdog timer
lm (4) - National Semiconductor LM78/79/81 temperature, voltage, and fan
sensor
lmenv (4) - National Semiconductor LM87 temperature, voltage, and fan
sensor
lmn (4) - National Semiconductor LM93 temperature, voltage, and fan sensor
nvt (4) - Nuvoton W83795G/ADG temperature, voltage, and fan sensor
tda (4/sparc64) - Philips TDA8444 fan controller
uguru (4) - ABIT temperature, voltage and fan sensors
wbenv (4) - Winbond W83L784R/W83L785R/W83L785TS-L temperature, voltage,
and fan sensor
wbng (4) - Winbond W83793G temperature, voltage, and fan sensor
DMESG:
OpenBSD 5.5-current (GENERIC.MP) #50: Thu Apr 3 12:37:31 MDT 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8537219072 (8141MB)
avail mem = 8301203456 (7916MB)
warning: no entropy supplied by boot loader
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec640 (117 entries)
bios0: vendor American Megatrends Inc. version "3.0" date 07/05/2013
bios0: Supermicro X9SRE/X9SRE-3F/X9SRi/X9SRi-3F
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC FPDT HPET PRAD SSDT SPCR EINJ ERST HEST BERT
DMAR MCFG
acpi0: wakeup devices PS2K(S4) PS2M(S4) P0P9(S1) EUSB(S4) USBE(S4)
PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) PEX6(S4) NPE2(S4)
NPE4(S4) NPE5(S4) PXHA(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 3600.43 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 3599.99 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 3599.99 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 3599.99 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0x80000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 9 (P0P9)
acpiprt2 at acpi0: bus 7 (PEX0)
acpiprt3 at acpi0: bus -1 (PEX1)
acpiprt4 at acpi0: bus -1 (PEX2)
acpiprt5 at acpi0: bus -1 (PEX3)
acpiprt6 at acpi0: bus -1 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
acpiprt8 at acpi0: bus -1 (PEX6)
acpiprt9 at acpi0: bus 6 (P0PA)
acpiprt10 at acpi0: bus -1 (NPE2)
acpiprt11 at acpi0: bus -1 (NPE5)
acpiprt12 at acpi0: bus -1 (PXHA)
acpiprt13 at acpi0: bus -1 (PXHB)
acpiprt14 at acpi0: bus 1 (NPE1)
acpiprt15 at acpi0: bus 2 (NPE3)
acpiprt16 at acpi0: bus 3 (NPE7)
acpiprt17 at acpi0: bus 5 (NPE9)
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpicpu2 at acpi0: C2, C1, PSS
acpicpu3 at acpi0: C2, C1, PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 3600 MHz: speeds: 3601, 3600, 3400, 3300, 3100,
2900, 2700, 2600, 2400, 2200, 2100, 1900, 1700, 1500, 1400, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel E5 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel E5 PCIE" rev 0x07: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 0 "Intel E5 PCIE" rev 0x07: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 3 function 0 "Intel E5 PCIE" rev 0x07: msi
pci3 at ppb2 bus 3
em0 at pci3 dev 0 function 0 "Intel I350" rev 0x01: msi, address
00:25:90:d0:ba:00
em1 at pci3 dev 0 function 1 "Intel I350" rev 0x01: msi, address
00:25:90:d0:ba:01
ppb3 at pci0 dev 3 function 2 "Intel E5 PCIE" rev 0x07: msi
pci4 at ppb3 bus 5
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 0 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 1 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 2 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 3 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 4 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 5 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 6 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 7 not configured
"Intel E5 Address Map" rev 0x07 at pci0 dev 5 function 0 not configured
"Intel E5 Error Reporting" rev 0x07 at pci0 dev 5 function 2 not configured
"Intel E5 I/O APIC" rev 0x07 at pci0 dev 5 function 4 not configured
ppb4 at pci0 dev 17 function 0 "Intel C600 Virtual PCIE" rev 0x06
pci5 at ppb4 bus 6
vendor "Intel", unknown product 0x1d6b (class mass storage subclass SAS,
rev 0x06) at pci5 dev 0 function 0 not configured
"Intel C600 MEI" rev 0x05 at pci0 dev 22 function 0 not configured
"Intel C600 MEI" rev 0x05 at pci0 dev 22 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel C600 USB" rev 0x06: apic 0 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 28 function 0 "Intel C600 PCIE" rev 0xb6: msi
pci6 at ppb5 bus 7
em2 at pci6 dev 0 function 0 "Intel I350" rev 0x01: msi, address
00:25:90:c9:62:dc
em3 at pci6 dev 0 function 1 "Intel I350" rev 0x01: msi, address
00:25:90:c9:62:dd
em4 at pci6 dev 0 function 2 "Intel I350" rev 0x01: msi, address
00:25:90:c9:62:de
em5 at pci6 dev 0 function 3 "Intel I350" rev 0x01: msi, address
00:25:90:c9:62:df
ehci1 at pci0 dev 29 function 0 "Intel C600 USB" rev 0x06: apic 0 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa6
pci7 at ppb6 bus 9
vga1 at pci7 dev 4 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel C600 LPC" rev 0x06
ahci0 at pci0 dev 31 function 2 "Intel C600 AHCI" rev 0x06: msi, AHCI 1.3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Corsair Force GT, 5.06> SCSI3 0/direct
fixed naa.0000000000000000
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, Corsair Force GT, 5.07> SCSI3 0/direct
fixed naa.0000000000000000
sd1: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel C600 SMBus" rev 0x06: apic 0 int
18
iic0 at ichiic0
lm1 at iic0 addr 0x2c: W83627DHG
iic0: addr 0x4c 04=01 44=01 84=01 c0=03 c1=01 c4=01 c6=01 ca=01 cb=01
cc=01 cd=02 cf=01 d1=02 d4=07 da=0f db=02 dd=01 de=03 words 00=ffff
01=ffff 02=ffff 03=ffff 04=01ff 05=ffff 06=ffff 07=ffff
"Intel C600 Thermal" rev 0x06 at pci0 dev 31 function 6 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33
lm2 at wbsio0 port 0xa30/8: NCT6776F
pci8 at mainbus0 bus 255
"Intel E5 QPI Link" rev 0x07 at pci8 dev 8 function 0 not configured
vendor "Intel", unknown product 0x3c83 (class system subclass
miscellaneous, rev 0x07) at pci8 dev 8 function 3 not configured
vendor "Intel", unknown product 0x3c84 (class system subclass
miscellaneous, rev 0x07) at pci8 dev 8 function 4 not configured
"Intel E5 QPI Link" rev 0x07 at pci8 dev 9 function 0 not configured
vendor "Intel", unknown product 0x3c93 (class system subclass
miscellaneous, rev 0x07) at pci8 dev 9 function 3 not configured
vendor "Intel", unknown product 0x3c94 (class system subclass
miscellaneous, rev 0x07) at pci8 dev 9 function 4 not configured
"Intel E5 PCU" rev 0x07 at pci8 dev 10 function 0 not configured
"Intel E5 PCU" rev 0x07 at pci8 dev 10 function 1 not configured
"Intel E5 PCU" rev 0x07 at pci8 dev 10 function 2 not configured
"Intel E5 PCU" rev 0x07 at pci8 dev 10 function 3 not configured
"Intel E5 Scratch" rev 0x07 at pci8 dev 11 function 0 not configured
"Intel E5 Scratch" rev 0x07 at pci8 dev 11 function 3 not configured
"Intel E5 Unicast" rev 0x07 at pci8 dev 12 function 0 not configured
"Intel E5 Unicast" rev 0x07 at pci8 dev 12 function 1 not configured
"Intel E5 SAD" rev 0x07 at pci8 dev 12 function 6 not configured
"Intel E5 SAD" rev 0x07 at pci8 dev 12 function 7 not configured
"Intel E5 Unicast" rev 0x07 at pci8 dev 13 function 0 not configured
"Intel E5 Unicast" rev 0x07 at pci8 dev 13 function 1 not configured
"Intel E5 Broadcast" rev 0x07 at pci8 dev 13 function 6 not configured
"Intel E5 Home Agent" rev 0x07 at pci8 dev 14 function 0 not configured
"Intel E5 Home Agent" rev 0x07 at pci8 dev 14 function 1 not configured
"Intel E5 TA" rev 0x07 at pci8 dev 15 function 0 not configured
"Intel E5 RAS" rev 0x07 at pci8 dev 15 function 1 not configured
"Intel E5 TAD" rev 0x07 at pci8 dev 15 function 2 not configured
"Intel E5 TAD" rev 0x07 at pci8 dev 15 function 3 not configured
"Intel E5 TAD" rev 0x07 at pci8 dev 15 function 4 not configured
"Intel E5 TAD" rev 0x07 at pci8 dev 15 function 5 not configured
"Intel E5 TAD" rev 0x07 at pci8 dev 15 function 6 not configured
"Intel E5 Thermal" rev 0x07 at pci8 dev 16 function 0 not configured
"Intel E5 Thermal" rev 0x07 at pci8 dev 16 function 1 not configured
"Intel E5 Error" rev 0x07 at pci8 dev 16 function 2 not configured
"Intel E5 Error" rev 0x07 at pci8 dev 16 function 3 not configured
"Intel E5 Thermal" rev 0x07 at pci8 dev 16 function 4 not configured
"Intel E5 Thermal" rev 0x07 at pci8 dev 16 function 5 not configured
"Intel E5 Error" rev 0x07 at pci8 dev 16 function 6 not configured
"Intel E5 Error" rev 0x07 at pci8 dev 16 function 7 not configured
"Intel E5 DDRIO" rev 0x07 at pci8 dev 17 function 0 not configured
"Intel E5 R2PCIE" rev 0x07 at pci8 dev 19 function 0 not configured
"Intel E5 PCIE Monitor" rev 0x07 at pci8 dev 19 function 1 not configured
"Intel E5 QPI" rev 0x07 at pci8 dev 19 function 4 not configured
"Intel E5 QPI Link Monitor" rev 0x07 at pci8 dev 19 function 5 not
configured
"Intel E5 QPI Link Monitor" rev 0x07 at pci8 dev 19 function 6 not
configured
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Raptor Gaming product
0x0103" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
If there is anyway to stop these fans from screaming like a banchee I'd
really appreciate it, like my other box of similar h/w which is whisper
quite.
Regards,
Kaya
