Hrm, I'll work on this and report back, but dissecting the tree and
venturing down the ACPI and APM rabbit holes is likely beyond my
ability.
On Thu, Mar 20, 2014 at 6:39 PM, Kenneth Westerback
<kwesterb...@gmail.com> wrote:
> 5.2 to 5.5 is a big jump. Can you try 5.3 and/or 5.4 to narrow down
> when the problem began? Bisecting the tree would be the next step. :-)
>
> .... Ken
>
> On 20 March 2014 20:34, Daniel Melameth <dan...@melameth.com> wrote:
>> With OpenBSD 5.2, I had no issue doing suspend and hibernate: when I
>> closed the lid, it suspended, when I hit Fn+F12 the BIOS took over,
>> with it's own pretty text interface, and hibernated the system.
>> iwi(4) also worked flawlessly with suspend/hibernate. Fast forward to
>> upgrading to "5.5" with ACPI: setting machdep.lidsuspend=1 allows the
>> system to suspend when I close the lid, but iwi(4) is broken upon
>> resume (iwi0: could not load boot firmware) and Fn+F12 or ZZZ leaves
>> me with a blank screen and an eternal flashing moon LED (swap is RAM +
>> 1GB). If I disable ACPI in UKC, which is enabled by default,
>> everything works as it did in 5.2 with the exception of hibernate
>> which behaves as if ACPI was enabled.
>>
>> Any recommendations on how to fix?
>>
>> Thanks.
>>
>>
>> dmesg with ACPI enabled (default):
>>
>> OpenBSD 5.5 (GENERIC) #276: Wed Mar 5 09:57:06 MST 2014
>> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
>> cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class) 2
>> GHz
>> cpu0:
>> FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,EST,TM2,PERF
>> real mem = 2146332672 (2046MB)
>> avail mem = 2098974720 (2001MB)
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 06/18/07, BIOS32 rev. 0 @
>> 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (61 entries)
>> bios0: vendor IBM version "1RETDRWW (3.23 )" date 06/18/2007
>> bios0: IBM 2373C61
>> acpi0 at bios0: rev 2
>> acpi0: sleep states S0 S3 S4 S5
>> acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT
>> acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S3) PCI1(S4)
>> DOCK(S4) USB0(S3) USB1(S3) AC9M(S4)
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpiec0 at acpi0
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus 1 (AGP_)
>> acpiprt2 at acpi0: bus 2 (PCI1)
>> acpicpu0 at acpi0: C3, C2, C1, PSS
>> acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7
>> acpitz0 at acpi0: critical temperature is 93 degC
>> acpibtn0 at acpi0: LID_
>> acpibtn1 at acpi0: SLPB
>> acpibat0 at acpi0: BAT0 model "IBM-08K8198" serial 153 type LION oem
>> "SANYO"
>> acpibat1 at acpi0: BAT1 not present
>> acpiac0 at acpi0: AC unit online
>> acpithinkpad0 at acpi0
>> acpidock0 at acpi0: DOCK not docked (0)
>> bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000
>> 0xdc000/0x4000! 0xe0000/0x10000
>> cpu0 at mainbus0: (uniprocessor)
>> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
>> cpu0: Enhanced SpeedStep 1999 MHz: speeds: 2000, 1800, 1600, 1400,
>> 1200, 1000, 800, 600 MHz
>> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
>> intelagp0 at pchb0
>> agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000
>> ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
>> pci1 at ppb0 bus 1
>> radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M10" rev 0x80
>> drm0 at radeondrm0
>> radeondrm0: irq 11
>> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
>> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
>> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
>> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
>> pci2 at ppb1 bus 2
>> 2:0:0: mem address conflict 0xb0000000/0x1000
>> 2:0:1: mem address conflict 0xb1000000/0x1000
>> cbb0 at pci2 dev 0 function 0 "TI PCI4520 CardBus" rev 0x01: irq 11
>> cbb1 at pci2 dev 0 function 1 "TI PCI4520 CardBus" rev 0x01: irq 11
>> em0 at pci2 dev 1 function 0 "Intel 82540EP" rev 0x03: irq 11, address
>> 00:01:6c:eb:89:64
>> iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05:
>> irq 11, address 00:12:f0:5b:30:42
>> cardslot0 at cbb0 slot 0 flags 0
>> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
>> pcmcia0 at cardslot0
>> cardslot1 at cbb1 slot 1 flags 0
>> cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
>> pcmcia1 at cardslot1
>> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
>> pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA,
>> channel 0 configured to compatibility, channel 1 configured to
>> compatibility
>> wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2080AH>
>> wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
>> atapiscsi0 at pciide0 channel 1 drive 0
>> scsibus0 at atapiscsi0: 2 targets
>> cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA765 DVD/CDRW, 1.02> ATAPI
>> 5/cdrom removable
>> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
>> ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
>> iic0 at ichiic0
>> spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2700CL2.5
>> spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC2700CL2.5
>> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq
>> 11, ICH4 AC97
>> ac97: codec id 0x41445374 (Analog Devices AD1981B)
>> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
>> audio0 at auich0
>> "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
>> usb1 at uhci0: USB revision 1.0
>> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb2 at uhci1: USB revision 1.0
>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb3 at uhci2: USB revision 1.0
>> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at ichpcib0
>> isadma0 at isa0
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard
>> pms0 at pckbc0 (aux slot)
>> pckbc0: using irq 12 for aux slot
>> wsmouse0 at pms0 mux 0
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> aps0 at isa0 port 0x1600/31
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> vscsi0 at root
>> scsibus1 at vscsi0: 256 targets
>> softraid0 at root
>> scsibus2 at softraid0: 256 targets
>> root on wd0a (06b05a49f2cb9591.a) swap on wd0b dump on wd0b
>> WARNING: / was not properly unmounted
>> drm: initializing kernel modesetting (RV350 0x1002:0x4E54 0x1014:0x054F).
>> radeondrm0: GTT: 256M 0xD0000000 - 0xDFFFFFFF
>> radeondrm0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (128M used)
>> drm: Panel ID String: SXGA+ Single (85MHz)
>> drm: Panel Size 1400x1050
>> drm: No TV DAC info found in BIOS
>> radeondrm0: 1400x1050
>> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
>> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>> iwi0: timeout waiting for master
>>
>>
>> dmesg with ACPI disabled:
>>
>> OpenBSD 5.5 (GENERIC) #276: Wed Mar 5 09:57:06 MST 2014
>> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
>> cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class) 2
>> GHz
>> cpu0:
>> FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,EST,TM2,PERF
>> real mem = 2146332672 (2046MB)
>> avail mem = 2098974720 (2001MB)
>> User Kernel Config
>> UKC> disable acpi
>> 484 acpi0 disabled
>> UKC> exit
>> Continuing...
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 06/18/07, BIOS32 rev. 0 @
>> 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (61 entries)
>> bios0: vendor IBM version "1RETDRWW (3.23 )" date 06/18/2007
>> bios0: IBM 2373C61
>> acpi at bios0 function 0x0 not configured
>> apm0 at bios0: Power Management spec V1.2
>> pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
>> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
>> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
>> pcibios0: PCI bus #6 is the last bus
>> bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000
>> 0xdc000/0x4000! 0xe0000/0x10000
>> cpu0 at mainbus0: (uniprocessor)
>> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
>> cpu0: Enhanced SpeedStep 1999 MHz: speeds: 2000, 1800, 1600, 1400,
>> 1200, 1000, 800, 600 MHz
>> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> 0:31:1: io address conflict 0x5800/0x8
>> 0:31:1: io address conflict 0x5808/0x4
>> 0:31:1: io address conflict 0x5810/0x8
>> 0:31:1: io address conflict 0x580c/0x4
>> pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
>> intelagp0 at pchb0
>> agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000
>> ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
>> pci1 at ppb0 bus 1
>> radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M10" rev 0x80
>> drm0 at radeondrm0
>> radeondrm0: irq 11
>> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
>> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
>> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
>> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
>> pci2 at ppb1 bus 2
>> 2:0:0: mem address conflict 0xb0000000/0x1000
>> 2:0:1: mem address conflict 0xb1000000/0x1000
>> cbb0 at pci2 dev 0 function 0 "TI PCI4520 CardBus" rev 0x01: irq 11
>> cbb1 at pci2 dev 0 function 1 "TI PCI4520 CardBus" rev 0x01: irq 11
>> em0 at pci2 dev 1 function 0 "Intel 82540EP" rev 0x03: irq 11, address
>> 00:01:6c:eb:89:64
>> iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05:
>> irq 11, address 00:12:f0:5b:30:42
>> cardslot0 at cbb0 slot 0 flags 0
>> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
>> pcmcia0 at cardslot0
>> cardslot1 at cbb1 slot 1 flags 0
>> cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
>> pcmcia1 at cardslot1
>> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01:
>> 24-bit timer at 3579545Hz
>> pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA,
>> channel 0 configured to compatibility, channel 1 configured to
>> compatibility
>> wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2080AH>
>> wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
>> atapiscsi0 at pciide0 channel 1 drive 0
>> scsibus0 at atapiscsi0: 2 targets
>> cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA765 DVD/CDRW, 1.02> ATAPI
>> 5/cdrom removable
>> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
>> ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
>> iic0 at ichiic0
>> spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2700CL2.5
>> spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC2700CL2.5
>> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq
>> 11, ICH4 AC97
>> ac97: codec id 0x41445374 (Analog Devices AD1981B)
>> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
>> audio0 at auich0
>> "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
>> usb1 at uhci0: USB revision 1.0
>> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb2 at uhci1: USB revision 1.0
>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb3 at uhci2: USB revision 1.0
>> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at ichpcib0
>> isadma0 at isa0
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard
>> pms0 at pckbc0 (aux slot)
>> pckbc0: using irq 12 for aux slot
>> wsmouse0 at pms0 mux 0
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> aps0 at isa0 port 0x1600/31
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> vscsi0 at root
>> scsibus1 at vscsi0: 256 targets
>> softraid0 at root
>> scsibus2 at softraid0: 256 targets
>> root on wd0a (06b05a49f2cb9591.a) swap on wd0b dump on wd0b
>> drm: initializing kernel modesetting (RV350 0x1002:0x4E54 0x1014:0x054F).
>> radeondrm0: GTT: 256M 0xD0000000 - 0xDFFFFFFF
>> radeondrm0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (128M used)
>> drm: Panel ID String: SXGA+ Single (85MHz)
>> drm: Panel Size 1400x1050
>> drm: No TV DAC info found in BIOS
>> radeondrm0: 1400x1050
>> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
>> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>> iwi0: timeout waiting for master
