5.2 to 5.5 is a big jump. Can you try 5.3 and/or 5.4 to narrow down
when the problem began? Bisecting the tree would be the next step. :-)
.... Ken
On 20 March 2014 20:34, Daniel Melameth <dan...@melameth.com> wrote:
> With OpenBSD 5.2, I had no issue doing suspend and hibernate: when I
> closed the lid, it suspended, when I hit Fn+F12 the BIOS took over,
> with it's own pretty text interface, and hibernated the system.
> iwi(4) also worked flawlessly with suspend/hibernate. Fast forward to
> upgrading to "5.5" with ACPI: setting machdep.lidsuspend=1 allows the
> system to suspend when I close the lid, but iwi(4) is broken upon
> resume (iwi0: could not load boot firmware) and Fn+F12 or ZZZ leaves
> me with a blank screen and an eternal flashing moon LED (swap is RAM +
> 1GB). If I disable ACPI in UKC, which is enabled by default,
> everything works as it did in 5.2 with the exception of hibernate
> which behaves as if ACPI was enabled.
>
> Any recommendations on how to fix?
>
> Thanks.
>
>
> dmesg with ACPI enabled (default):
>
> OpenBSD 5.5 (GENERIC) #276: Wed Mar 5 09:57:06 MST 2014
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,EST,TM2,PERF
> real mem = 2146332672 (2046MB)
> avail mem = 2098974720 (2001MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 06/18/07, BIOS32 rev. 0 @
> 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (61 entries)
> bios0: vendor IBM version "1RETDRWW (3.23 )" date 06/18/2007
> bios0: IBM 2373C61
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT
> acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S3) PCI1(S4)
> DOCK(S4) USB0(S3) USB1(S3) AC9M(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (AGP_)
> acpiprt2 at acpi0: bus 2 (PCI1)
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7
> acpitz0 at acpi0: critical temperature is 93 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "IBM-08K8198" serial 153 type LION oem "SANYO"
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: DOCK not docked (0)
> bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000
> 0xdc000/0x4000! 0xe0000/0x10000
> cpu0 at mainbus0: (uniprocessor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: Enhanced SpeedStep 1999 MHz: speeds: 2000, 1800, 1600, 1400,
> 1200, 1000, 800, 600 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
> intelagp0 at pchb0
> agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000
> ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
> pci1 at ppb0 bus 1
> radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M10" rev 0x80
> drm0 at radeondrm0
> radeondrm0: irq 11
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
> pci2 at ppb1 bus 2
> 2:0:0: mem address conflict 0xb0000000/0x1000
> 2:0:1: mem address conflict 0xb1000000/0x1000
> cbb0 at pci2 dev 0 function 0 "TI PCI4520 CardBus" rev 0x01: irq 11
> cbb1 at pci2 dev 0 function 1 "TI PCI4520 CardBus" rev 0x01: irq 11
> em0 at pci2 dev 1 function 0 "Intel 82540EP" rev 0x03: irq 11, address
> 00:01:6c:eb:89:64
> iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05:
> irq 11, address 00:12:f0:5b:30:42
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia1 at cardslot1
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
> pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2080AH>
> wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA765 DVD/CDRW, 1.02> ATAPI
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2700CL2.5
> spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC2700CL2.5
> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq
> 11, ICH4 AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd0a (06b05a49f2cb9591.a) swap on wd0b dump on wd0b
> WARNING: / was not properly unmounted
> drm: initializing kernel modesetting (RV350 0x1002:0x4E54 0x1014:0x054F).
> radeondrm0: GTT: 256M 0xD0000000 - 0xDFFFFFFF
> radeondrm0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (128M used)
> drm: Panel ID String: SXGA+ Single (85MHz)
> drm: Panel Size 1400x1050
> drm: No TV DAC info found in BIOS
> radeondrm0: 1400x1050
> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> iwi0: timeout waiting for master
>
>
> dmesg with ACPI disabled:
>
> OpenBSD 5.5 (GENERIC) #276: Wed Mar 5 09:57:06 MST 2014
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,EST,TM2,PERF
> real mem = 2146332672 (2046MB)
> avail mem = 2098974720 (2001MB)
> User Kernel Config
> UKC> disable acpi
> 484 acpi0 disabled
> UKC> exit
> Continuing...
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 06/18/07, BIOS32 rev. 0 @
> 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (61 entries)
> bios0: vendor IBM version "1RETDRWW (3.23 )" date 06/18/2007
> bios0: IBM 2373C61
> acpi at bios0 function 0x0 not configured
> apm0 at bios0: Power Management spec V1.2
> pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #6 is the last bus
> bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000
> 0xdc000/0x4000! 0xe0000/0x10000
> cpu0 at mainbus0: (uniprocessor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: Enhanced SpeedStep 1999 MHz: speeds: 2000, 1800, 1600, 1400,
> 1200, 1000, 800, 600 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> 0:31:1: io address conflict 0x5800/0x8
> 0:31:1: io address conflict 0x5808/0x4
> 0:31:1: io address conflict 0x5810/0x8
> 0:31:1: io address conflict 0x580c/0x4
> pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
> intelagp0 at pchb0
> agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000
> ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
> pci1 at ppb0 bus 1
> radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M10" rev 0x80
> drm0 at radeondrm0
> radeondrm0: irq 11
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
> pci2 at ppb1 bus 2
> 2:0:0: mem address conflict 0xb0000000/0x1000
> 2:0:1: mem address conflict 0xb1000000/0x1000
> cbb0 at pci2 dev 0 function 0 "TI PCI4520 CardBus" rev 0x01: irq 11
> cbb1 at pci2 dev 0 function 1 "TI PCI4520 CardBus" rev 0x01: irq 11
> em0 at pci2 dev 1 function 0 "Intel 82540EP" rev 0x03: irq 11, address
> 00:01:6c:eb:89:64
> iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05:
> irq 11, address 00:12:f0:5b:30:42
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia1 at cardslot1
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01:
> 24-bit timer at 3579545Hz
> pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2080AH>
> wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA765 DVD/CDRW, 1.02> ATAPI
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2700CL2.5
> spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC2700CL2.5
> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq
> 11, ICH4 AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd0a (06b05a49f2cb9591.a) swap on wd0b dump on wd0b
> drm: initializing kernel modesetting (RV350 0x1002:0x4E54 0x1014:0x054F).
> radeondrm0: GTT: 256M 0xD0000000 - 0xDFFFFFFF
> radeondrm0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (128M used)
> drm: Panel ID String: SXGA+ Single (85MHz)
> drm: Panel Size 1400x1050
> drm: No TV DAC info found in BIOS
> radeondrm0: 1400x1050
> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> iwi0: timeout waiting for master
