On 08/30, Bryan Vyhmeister wrote:
> I'm running OpenBSD/amd64 5.4-current with GENERIC.MP from 2013/08/19
> downloaded from the mirrors on a Levovo ThinkPad X1 Carbon. Both
> snapshots I have tried (2013/08/25 and 2013/08/29) after the 19th have
> resulted in hard system freezes every few hours. I don't have any logs
> or anything else that indicate a hard freeze but everything just hard
> freezes. I first noticed because I left the ThinkPad running overnight
> on my desk and when I came back to the system the next morning it was
> hard frozen. Several times during the day while I'm working I have also
> experienced the same thing. Anyone else seeing something similar?
> 
> Bryan

I'm seeing the same thing on my desktop (dmesg below).  Random freezes,
no debug output that I've seen in any logs, first time I noticed was
after updating to aug24 snapshot, behavior is the same with aug29th.  

I followed instructions in current for upgrading, perhaps I'll try a
fresh install (non upgrade) w/the latest snap to see if that helps.  

Don't have much more data at the moment, still can't reliably get the
freeze to happen, sometimes it's when I launch tmux (tmux attach -t0)
sometimes it's when I have a lot of xterms open... last night it was
when I was playing warzone2100 (hey, I just got good video support with
my radeon card!!!) always happens in X
though, I can use the machine all day long via ssh from work w/out
an issue.  

I'll try and track down more data, and run through the disable apmd, etc
process laster this afternoon.  And if it's useful, I can backtrack
through snapshots to see where this started happening.

gabe. 


OpenBSD 5.4-current (GENERIC.MP) #48: Thu Aug 29 11:22:15 MDT 2013
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8031686656 (7659MB)
avail mem = 7809785856 (7447MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb2c0 (50 entries)
bios0: vendor AMI version "P01-B2" date 08/03/2011
bios0: Acer Aspire X1430
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC HPET SSDT SSDT
acpi0: wakeup devices SBAZ(S4) PS2K(S3) PS2M(S3) P0PC(S4) GEC_(S4) PE20(S4) 
PE21(S4) PE22(S4) PE23(S4) UHC1(S3) UHC2(S3) USB3(S3) UHC4(S3) USB5(S3) 
UHC7(S3) UHC6(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD E-450 APU with Radeon(tm) HD Graphics, 1647.32 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 
16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD E-450 APU with Radeon(tm) HD Graphics, 1646.49 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 
16-way L2 cache
cpu1: 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 3, remapped to apid 0
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (PE20)
acpiprt2 at acpi0: bus -1 (PE21)
acpiprt3 at acpi0: bus 6 (PE22)
acpiprt4 at acpi0: bus -1 (PE23)
acpiprt5 at acpi0: bus -1 (BR15)
acpiprt6 at acpi0: bus -1 (PCE6)
acpiprt7 at acpi0: bus -1 (PCE7)
acpiprt8 at acpi0: bus -1 (PCE8)
acpiprt9 at acpi0: bus 1 (BR14)
acpicpu0 at acpi0: C2, PSS
acpicpu1 at acpi0: C2, PSS
acpibtn0 at acpi0: PWRB
cpu0: 1647 MHz: speeds: 1650 1320 825 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6320" rev 0x00: apic 0 int 18
drm0 at radeondrm0
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 0 int 19, AHCI 
1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, INTEL SSDSA2M080, 2CV1> SCSI3 0/direct 
fixed naa.5001517959405bba
sd0: 76319MB, 512 bytes/sector, 156301488 sectors, thin
sd1 at scsibus0 targ 1 lun 0: <ATA, ST3500413AS, JC45> SCSI3 0/direct fixed 
naa.5000c500359a829f
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 0 int 18, 
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 0 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 0 int 18, 
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 0 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 0 int 16
azalia1: codecs: Realtek ALC662
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb1 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci2 at ppb1 bus 2
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 0 int 18, 
version 1.0, legacy support
ppb2 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00
pci4 at ppb3 bus 6
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL 
(0x2c80), apic 0 int 18, address c8:9c:dc:2d:be:90
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 0 int 18, 
version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 0 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8772F rev 0, EC port 0xe80
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk ImageMate CF" rev 
2.00/0.32 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd2 at scsibus1 targ 1 lun 0: <SanDisk, ImageMate CF, 1.00> SCSI0 0/direct 
removable
uhub7 at uhub0 port 5 "NEC hub" rev 2.00/1.00 addr 3
umass1 at uhub2 port 3 configuration 1 interface 0 "Generic USB2.0-CRW" rev 
2.00/58.88 addr 2
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd3 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct 
removable serial.0bda0158114173400000
uhidev0 at uhub4 port 1 configuration 1 interface 0 "PIXART USB OPTICAL MOUSE" 
rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uplcom0 at uhub4 port 2 "Prolific Technology Inc. USB-Serial Controller" rev 
1.10/3.00 addr 3
ucom0 at uplcom0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (2be8bf64e310eced.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
drm: initializing kernel modesetting (PALM 0x1002:0x9806 0x1025:0x0592).
radeondrm0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeondrm0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
ttm_pool_mm_shrink_init stub
drm: PCIE GART of 512M enabled (table at 0x0000000000040000).
drm: Internal thermal controller without fan control
radeondrm0: 1920x1080
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
wsmouse0 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub4 port 1 configuration 1 interface 0 "PIXART USB OPTICAL MOUSE" 
rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0

Reply via email to