On Mon, 2 Sep 2013 12:13:22 +0200, Stefan Sperling wrote:
> On Sun, Sep 01, 2013 at 12:52:32PM -0700, Bryan Vyhmeister wrote:
> > Yes, I have a Synaptics touchpad and the freeze has only happened under
> > X as far as I know but I am pretty much always running X. Thank you.
> 
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pms0 mux 0
> > wsmouse1 at pms0 mux 0
> > pms0: Synaptics clickpad, firmware 8.1
> 
> One way I found to reliably hard lock my system (which has the same
> device with firmware version 8.0) is to have both wsmoused and xdm
> running, and run this command as root:
> while sleep 3; do wsconsctl display.focus=0; sleep 3; wsconsctl 
> display.focus=4; done
> The hangs appear during or shortly after switching virtual consoles from
> text to X. So far I could figure out that there seems to be some race
> with closing the mouse device when wsmoused(8) tries to relinquish it to X.
> The hang also happens when I disable the special synaptics code,
> forcing the driver to treat the pad as a normal PS/2 mouse.
I can confirm that disabling wsmoused(8) makes switching to and from
virtual consoles/X work for me.  But it probably doesn't help for the
random hangs I'm seeing once in a while (yes, jsg@ knows about it).

> If your system locks up over night without being used (which I've seen
> happen once, too, but it's hard to reproduce), or you don't have
> wsmoused running in the first place, then it's probably some other issue.
> 
> OpenBSD 5.4-current (GENERIC.MP) #108: Mon Sep  2 11:17:35 CEST 2013
>     s...@noel.stsp.name:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 3849388032 (3671MB)
> avail mem = 3738832896 (3565MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf9d00 (58 entries)
> bios0: vendor LENOVO version "8RET52WW (1.15 )" date 11/15/2011
> bios0: LENOVO 0627A41
> acpi0 at bios0: rev 4
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP HPET APIC MCFG UEFI UEFI SSDT SSDT UEFI
> acpi0: wakeup devices PB4_(S4) PB5_(S4) PB6_(S4) PB7_(S4) OHC1(S3) EHC1(S3) 
> OHC2(S3) SBAZ(S4) GEC_(S4) P2P_(S5) SPB0(S4) SPB1(S4) SPB2(S4) SPB3(S4) 
> LID_(S4)
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpihpet0 at acpi0: 14318180 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD E-450 APU with Radeon(tm) HD Graphics, 1646.71 MHz
> cpu0: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
> cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 
> 64b/line 16-way L2 cache
> cpu0: 8 4MB entries fully associative
> cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: smt 0, core 0, package 0
> cpu0: apic clock running at 271MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: AMD E-450 APU with Radeon(tm) HD Graphics, 2239.23 MHz
> cpu1: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
> cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 
> 64b/line 16-way L2 cache
> cpu1: 8 4MB entries fully associative
> cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> cpu1: smt 0, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 2
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-31
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (PB4_)
> acpiprt2 at acpi0: bus 2 (PB5_)
> acpiprt3 at acpi0: bus 3 (PB6_)
> acpiprt4 at acpi0: bus 4 (PB7_)
> acpiprt5 at acpi0: bus 5 (P2P_)
> acpiprt6 at acpi0: bus -1 (SPB0)
> acpiprt7 at acpi0: bus -1 (SPB1)
> acpiprt8 at acpi0: bus -1 (SPB2)
> acpiprt9 at acpi0: bus -1 (SPB3)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C2, PSS
> acpicpu1 at acpi0: C2, PSS
> acpitz0 at acpi0: critical temperature is 100 degC
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: SLPB
> acpithinkpad0 at acpi0
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT1 model "42T4957" serial  1495 type LION oem "SANYO"
> acpibtn2 at acpi0: LID_
> cpu0: 1646 MHz: speeds: 1650 1320 825 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
> radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6320" rev 0x00: apic 2 int 
> 18
> drm0 at radeondrm0
> azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi
> azalia0: no supported codecs
> ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
> pci1 at ppb0 bus 1
> "Atheros AR9485" rev 0x01 at pci1 dev 0 function 0 not configured
> ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
> pci2 at ppb1 bus 2
> "Realtek 8188CE" rev 0x01 at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
> pci3 at ppb2 bus 3
> alc0 at pci3 dev 0 function 0 "Attansic Technology L1D" rev 0xc0: msi, 
> address 04:7d:7b:30:dd:f2
> atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 0
> ppb3 at pci0 dev 7 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
> pci4 at ppb3 bus 4
> rtsx0 at pci4 dev 0 function 0 "Realtek RTS5209 Card Reader" rev 0x01: msi
> sdmmc0 at rtsx0
> ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int 19, 
> AHCI 1.2
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS54323, ES2Z> SCSI3 0/direct 
> fixed naa.5000cca6c7d4a2ff
> sd0: 305245MB, 512 bytes/sector, 625142448 sectors
> ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, 
> version 1.0, legacy support
> ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
> ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, 
> version 1.0, legacy support
> ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
> piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
> iic0 at piixpm0
> spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 2 int 16
> azalia1: codecs: Conexant/0x506e
> audio0 at azalia1
> pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
> ppb4 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
> pci5 at ppb4 bus 5
> pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
> pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
> pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
> km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
> pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
> pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
> pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
> pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
> usb2 at ohci0: USB revision 1.0
> uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> usb3 at ohci1: USB revision 1.0
> uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> umass0 at uhub0 port 1 configuration 1 interface 0 "Intenso Intenso Micro 
> Line" rev 2.00/1.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <Intenso, Micro Line, 1.00> SCSI2 0/direct 
> removable serial.8644800b0000000004BD
> sd1: 7651MB, 512 bytes/sector, 15669248 sectors
> uvideo0 at uhub1 port 5 configuration 1 interface 0 "Image Processor 
> Integrated Camera" rev 2.00/41.64 addr 2
> video0 at uvideo0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
> sd2: 304214MB, 512 bytes/sector, 623032305 sectors
> root on sd2a (ddd2f6bca8f0c2cc.a) swap on sd2b dump on sd2b
> drm: initializing kernel modesetting (PALM 0x1002:0x9806 0x17AA:0x21EC).
> radeondrm0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
> radeondrm0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
> ttm_pool_mm_shrink_init stub
> drm: PCIE GART of 512M enabled (table at 0x0000000000040000).
> drm: Internal thermal controller without fan control
> radeondrm0: 1366x768
> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)

Reply via email to