On Mon, Nov 12, 2012 at 12:11 AM, Chris Chung <chunc...@gmail.com> wrote: > On Sun, Nov 11, 2012 at 07:05:43PM +0100, Tomas Bodzar wrote: >> On Sun, Nov 11, 2012 at 5:15 PM, Chris Chung <chunc...@gmail.com> wrote: >> > On Sun, Nov 11, 2012 at 08:14:49AM +0100, Tomas Bodzar wrote: >> >> On Sun, Nov 11, 2012 at 2:53 AM, Chris Chung <chunc...@gmail.com> wrote: >> >> > Hello, >> >> > >> >> > When attempting to connect an external hard drive through a usb port I'm >> >> > receiving the error below. I can sucessfully mount my dvd drive and sd >> >> > memory >> >> > cards without issue. This could be a hardware issue, but I'm not >> >> > sure. I have read the relevant FAQ sections along with the man pages for >> >> > disklabel and mount but still at a loss, so any additional insights >> >> > would be appreciated. >> >> > >> >> > # /var/log/messages >> >> > openbox /bsd: uhub5: device problem, disabling port 2 >> >> > >> >> >> >> From code >> >> http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/usb/uhub.c?rev=1.59 >> >> >> >> if (err) { >> >> DPRINTFN(-1,("uhub_explore: usbd_new_device failed, >> >> " >> >> "error=%s\n", usbd_errstr(err))); >> >> /* Avoid addressing problems by disabling. */ >> >> /* usbd_reset_port(dev, port, &up->status); */ >> >> >> >> /* >> >> * The unit refused to accept a new address, or had >> >> * some other serious problem. Since we cannot >> >> leave >> >> * at 0 we have to disable the port instead. >> >> */ >> >> printf("%s: device problem, disabling port %d\n", >> >> sc->sc_dev.dv_xname, port); >> >> usbd_clear_port_feature(dev, port, UHF_PORT_ENABLE); >> >> >> >> > # dmesg >> >> > OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012 >> >> > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP >> >> > cpu0: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" >> >> > 686-class) 2.67 GHz >> >> > cpu0: >> >> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF >> >> > real mem = 3178491904 (3031MB) >> >> > avail mem = 3116384256 (2972MB) >> >> > mainbus0 at root >> >> > bios0 at mainbus0: AT/286+ BIOS, date 03/17/11, BIOS32 rev. 0 @ >> >> > 0xfdc50, SMBIOS rev. 2.4 @ 0xe0010 (80 entries) >> >> > bios0: vendor LENOVO version "6FET88WW (3.18 )" date 03/17/2011 >> >> > bios0: LENOVO 4063HK6 >> >> > acpi0 at bios0: rev 2 >> >> > acpi0: sleep states S0 S3 S4 S5 >> >> > acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT >> >> > TCPA SSDT SSDT SSDT >> >> > acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) >> >> > EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) >> >> > EHC0(S3) EHC1(S3) HDEF(S4) >> >> > acpitimer0 at acpi0: 3579545 Hz, 24 bits >> >> > acpiec0 at acpi0 >> >> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> >> > cpu0 at mainbus0: apid 0 (boot processor) >> >> > cpu0: apic clock running at 266MHz >> >> > cpu1 at mainbus0: apid 1 (application processor) >> >> > cpu1: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" >> >> > 686-class) 2.67 GHz >> >> > cpu1: >> >> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF >> >> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins >> >> > ioapic0: misconfigured as apic 2, remapped to apid 1 >> >> > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 >> >> > acpihpet0 at acpi0: 14318179 Hz >> >> > acpiprt0 at acpi0: bus 0 (PCI0) >> >> > acpiprt1 at acpi0: bus -1 (AGP_) >> >> > acpiprt2 at acpi0: bus 2 (EXP0) >> >> > acpiprt3 at acpi0: bus 3 (EXP1) >> >> > acpiprt4 at acpi0: bus -1 (EXP2) >> >> > acpiprt5 at acpi0: bus 5 (EXP3) >> >> > acpiprt6 at acpi0: bus 13 (EXP4) >> >> > acpiprt7 at acpi0: bus 21 (PCI1) >> >> > acpicpu0 at acpi0: C3, C2, C1, PSS >> >> > acpicpu1 at acpi0: C3, C2, C1, PSS >> >> > acpipwrres0 at acpi0: PUBS >> >> > acpitz0 at acpi0: critical temperature is 127 degC >> >> > acpitz1 at acpi0: critical temperature is 100 degC >> >> > acpibtn0 at acpi0: LID_ >> >> > acpibtn1 at acpi0: SLPB >> >> > acpibat0 at acpi0: BAT0 model "42T4620" serial 1283 type LION oem >> >> > "Panasonic" >> >> > acpibat1 at acpi0: BAT1 not present >> >> > acpiac0 at acpi0: AC unit offline >> >> > acpithinkpad0 at acpi0 >> >> > acpidock0 at acpi0: GDCK not docked (0) >> >> > bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 >> >> > 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000 >> >> > cpu0: Enhanced SpeedStep 2661 MHz: speeds: 2667, 2666, 2133, 1600, 800 >> >> > MHz >> >> > pci0 at mainbus0 bus 0: configuration mode 1 (bios) >> >> > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 >> >> > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 >> >> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> >> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> >> > intagp0 at vga1 >> >> > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 >> >> > inteldrm0 at vga1: apic 1 int 16 >> >> > drm0 at inteldrm0 >> >> > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured >> >> > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured >> >> > puc0 at pci0 dev 3 function 3 "Intel GM45 AMT SOL" rev 0x07: ports: 1 >> >> > com >> >> > com3 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo >> >> > com3: probed fifo depth: 0 bytes >> >> > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, >> >> > address 00:22:68:11:dc:fd >> >> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int >> >> > 20 >> >> > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int >> >> > 21 >> >> > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int >> >> > 22 >> >> > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int >> >> > 23 >> >> > usb0 at ehci0: USB revision 2.0 >> >> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> >> > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi >> >> > azalia0: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant >> >> > CX20561 >> >> > audio0 at azalia0 >> >> > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int >> >> > 20 >> >> > pci1 at ppb0 bus 2 >> >> > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int >> >> > 21 >> >> > pci2 at ppb1 bus 3 >> >> > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, >> >> > MIMO 3T3R, MoW, address 00:21:6a:11:5a:be >> >> > ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int >> >> > 23 >> >> > pci3 at ppb2 bus 5 >> >> > ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int >> >> > 20 >> >> > pci4 at ppb3 bus 13 >> >> > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int >> >> > 16 >> >> > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int >> >> > 17 >> >> > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int >> >> > 18 >> >> > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int >> >> > 19 >> >> > usb1 at ehci1: USB revision 2.0 >> >> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> >> > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 >> >> > pci5 at ppb4 bus 21 >> >> > cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 >> >> > int 16 >> >> > "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured >> >> > sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 >> >> > int 18 >> >> > sdmmc0 at sdhc0 >> >> > "Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured >> >> > "Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not >> >> > configured >> >> > "Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured >> >> > cardslot0 at cbb0 slot 0 flags 0 >> >> > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0 >> >> > pcmcia0 at cardslot0 >> >> > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 >> >> > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI >> >> > 1.2 >> >> > scsibus0 at ahci0: 32 targets >> >> > sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500420AS, 0003> SCSI3 0/direct >> >> > fixed naa.5000c5002edad677 >> >> > sd0: 476940MB, 512 bytes/sector, 976773168 sectors >> >> > cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GU10N, MX05> ATAPI >> >> > 5/cdrom removable >> >> > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 >> >> > int 23 >> >> > iic0 at ichiic0 >> >> > usb2 at uhci0: USB revision 1.0 >> >> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> >> > usb3 at uhci1: USB revision 1.0 >> >> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> >> > usb4 at uhci2: USB revision 1.0 >> >> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> >> > usb5 at uhci3: USB revision 1.0 >> >> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> >> > usb6 at uhci4: USB revision 1.0 >> >> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> >> > usb7 at uhci5: USB revision 1.0 >> >> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> >> > isa0 at pcib0 >> >> > isadma0 at isa0 >> >> > pckbc0 at isa0 port 0x60/5 >> >> > pckbd0 at pckbc0 (kbd slot) >> >> > pckbc0: using irq 1 for kbd slot >> >> > wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> >> > pms0 at pckbc0 (aux slot) >> >> > pckbc0: using irq 12 for aux slot >> >> > wsmouse0 at pms0 mux 0 >> >> > wsmouse1 at pms0 mux 0 >> >> > pms0: Synaptics touchpad, firmware 7.0 >> >> > pcppi0 at isa0 port 0x61 >> >> > spkr0 at pcppi0 >> >> > aps0 at isa0 port 0x1600/31 >> >> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >> >> > mtrr: Pentium Pro MTRR support >> >> > scsibus1 at sdmmc0: 2 targets, initiator 0 >> >> > sd1 at scsibus1 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed >> >> > sd1: 15199MB, 512 bytes/sector, 31127552 sectors >> >> > uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony >> >> > Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2 >> >> > video0 at uvideo0 >> >> > ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 >> >> > addr 2 >> >> > ugen1 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with >> >> > Enhanced Data Rate II" rev 2.00/3.99 addr 3 >> >> > vscsi0 at root >> >> > scsibus2 at vscsi0: 256 targets >> >> > softraid0 at root >> >> > scsibus3 at softraid0: 256 targets >> >> > root on sd0a (ec0193beaab07f52.a) swap on sd0b dump on sd0 >> >> > >> >> > >> >> > thanks, >> >> > >> >> > chris. >> >> > >> > >> > Hi Tomas, >> > >> > Thanks for the response. >> > >> > I connected a usb memory stick to the same usb port I was attempting to >> > connect >> > the external hard drive to and recieved the messages below. This leads me >> > to believe the port is fine and it is the drive/connection is not >> > compatible for some reason. >> > >> > # /var/log/messages >> > openbox /bsd: umass0 at uhub1 >> > openbox /bsd: port 2 configuration 1 interface 0 "SanDisk U3 Cruzer >> > Micro" rev 2.00/0.10 addr 2 >> > openbox /bsd: umass0: using SCSI over Bulk-Only >> > openbox /bsd: scsibus4 at umass0: 2 targets, initiator 0 >> > openbox /bsd: sd2 at scsibus4 targ 1 lun 0: <SanDisk, U3 Cruzer Micro, >> > 4.05> SCSI2 0/direct removable >> > openbox /bsd: sd2: 3912MB, 512 bytes/sector, 8013453 sectors >> > openbox /bsd: cd1 at scsibus4 targ 1 lun 1: <SanDisk, U3 Cruzer Micro, >> > 4.05> SCSI2 5/cdrom removabl >> > >> > The strange thing is that this drive works fine when connecting to a >> > windows machine, >> > so the drive itself is not faulty. Are there any further diagnostics I >> > can perform to >> > troubleshoot this issue, or should I consider this simply not a compatble >> > device? >> >> Check man usbdevs and try to get more details about your device when >> connected with that command. You can try to install usbutil package as >> well which have some more utilites. There's usbutils as well, but >> seems like it doesn't have all commands as usbutil. All of them can >> provide more details about your HW if possible to get them of course. >> Which filesystem is on your device and what product is that? Can you >> check with scandisk or whatever for errors? >> >> > >> > thanks, >> > >> > chris. > > Thanks for the hints. Here is a bit more information on the device. > > External 2.5" Western Digital SATA drive / INEO USB 3.0 enclosure connected > to a USB 2.0 port on my Lenovo W500. The external drive is formatted as NTFS. > I'm reading a few posts on the internet which indicate that OpenBSD does not > currently support USB 3.0. Not sure if this is the issue I have or not. I'll > hopefuly be able to test later this week with a USB 2.0 enclosure. > > From what I can tell there is little to no information which I can probe > from the device when connected. Any futher thoughts or should I wait until > this can be tested with a USB 2.0 enclosure? Thanks again.
But USB is supposed to switch to lower mode if possible. Maybe it's not possible with your HW :-) Anyway, can you test with latest snapshot as well and not 5.1 if there's some difference? > > # output from usbdevs -dv; external drive is not present/recognized > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub0 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > port 6 addr 2: high speed, power 100 mA, config 1, product 0x4807(0x4807), > Chicony Electronics Co., Ltd.(0x17ef), rev 31.34 > uvideo0 > Controller /dev/usb1: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub1 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > port 6 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub2 > port 1 powered > port 2 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub3 > port 1 addr 2: full speed, power 100 mA, config 1, Fingerprint > Sensor(0x2810), AuthenTec(0x08ff), rev 17.03 > ugen0 > port 2 addr 3: full speed, self powered, config 1, ThinkPad Bluetooth with > Enhanced Data Rate II(0x2145), Lenovo Computer Corp(0x0a5c), rev 3.99 > ugen1 > Controller /dev/usb4: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub4 > port 1 powered > port 2 powered > Controller /dev/usb5: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub5 > port 1 powered > port 2 powered > Controller /dev/usb6: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub6 > port 1 powered > port 2 powered > Controller /dev/usb7: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub7 > port 1 powered > port 2 powered > > # output from usbstats > Controller /dev/usb0: > 147 control > 0 isochronous > 0 bulk > 3 interrupt > Controller /dev/usb1: > 395 control > 0 isochronous > 308 bulk > 20 interrupt > Controller /dev/usb2: > 73 control > 0 isochronous > 0 bulk > 0 interrupt > Controller /dev/usb3: > 245 control > 0 isochronous > 0 bulk > 9 interrupt > Controller /dev/usb4: > 73 control > 0 isochronous > 0 bulk > 0 interrupt > Controller /dev/usb5: > 276 control > 0 isochronous > 0 bulk > 23 interrupt > Controller /dev/usb6: > 73 control > 0 isochronous > 0 bulk > 0 interrupt > Controller /dev/usb7: > 73 control > 0 isochronous > 0 bulk > 0 interrupt > > usbctl -a 2 -f /dev/usb5 does not give me anything.
