On Sun, Nov 11, 2012 at 08:14:49AM +0100, Tomas Bodzar wrote: > On Sun, Nov 11, 2012 at 2:53 AM, Chris Chung <chunc...@gmail.com> wrote: > > Hello, > > > > When attempting to connect an external hard drive through a usb port I'm > > receiving the error below. I can sucessfully mount my dvd drive and sd > > memory > > cards without issue. This could be a hardware issue, but I'm not > > sure. I have read the relevant FAQ sections along with the man pages for > > disklabel and mount but still at a loss, so any additional insights would > > be appreciated. > > > > # /var/log/messages > > openbox /bsd: uhub5: device problem, disabling port 2 > > > > From code > http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/usb/uhub.c?rev=1.59 > > if (err) { > DPRINTFN(-1,("uhub_explore: usbd_new_device failed, " > "error=%s\n", usbd_errstr(err))); > /* Avoid addressing problems by disabling. */ > /* usbd_reset_port(dev, port, &up->status); */ > > /* > * The unit refused to accept a new address, or had > * some other serious problem. Since we cannot leave > * at 0 we have to disable the port instead. > */ > printf("%s: device problem, disabling port %d\n", > sc->sc_dev.dv_xname, port); > usbd_clear_port_feature(dev, port, UHF_PORT_ENABLE); > > > # dmesg > > OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012 > > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP > > cpu0: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) > > 2.67 GHz > > cpu0: > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF > > real mem = 3178491904 (3031MB) > > avail mem = 3116384256 (2972MB) > > mainbus0 at root > > bios0 at mainbus0: AT/286+ BIOS, date 03/17/11, BIOS32 rev. 0 @ 0xfdc50, > > SMBIOS rev. 2.4 @ 0xe0010 (80 entries) > > bios0: vendor LENOVO version "6FET88WW (3.18 )" date 03/17/2011 > > bios0: LENOVO 4063HK6 > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA > > SSDT SSDT SSDT > > acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) > > EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) > > EHC1(S3) HDEF(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpiec0 at acpi0 > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: apic clock running at 266MHz > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) > > 2.67 GHz > > cpu1: > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF > > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > > ioapic0: misconfigured as apic 2, remapped to apid 1 > > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 > > acpihpet0 at acpi0: 14318179 Hz > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (AGP_) > > acpiprt2 at acpi0: bus 2 (EXP0) > > acpiprt3 at acpi0: bus 3 (EXP1) > > acpiprt4 at acpi0: bus -1 (EXP2) > > acpiprt5 at acpi0: bus 5 (EXP3) > > acpiprt6 at acpi0: bus 13 (EXP4) > > acpiprt7 at acpi0: bus 21 (PCI1) > > acpicpu0 at acpi0: C3, C2, C1, PSS > > acpicpu1 at acpi0: C3, C2, C1, PSS > > acpipwrres0 at acpi0: PUBS > > acpitz0 at acpi0: critical temperature is 127 degC > > acpitz1 at acpi0: critical temperature is 100 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: SLPB > > acpibat0 at acpi0: BAT0 model "42T4620" serial 1283 type LION oem > > "Panasonic" > > acpibat1 at acpi0: BAT1 not present > > acpiac0 at acpi0: AC unit offline > > acpithinkpad0 at acpi0 > > acpidock0 at acpi0: GDCK not docked (0) > > bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 > > 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000 > > cpu0: Enhanced SpeedStep 2661 MHz: speeds: 2667, 2666, 2133, 1600, 800 MHz > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > intagp0 at vga1 > > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > > inteldrm0 at vga1: apic 1 int 16 > > drm0 at inteldrm0 > > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured > > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured > > puc0 at pci0 dev 3 function 3 "Intel GM45 AMT SOL" rev 0x07: ports: 1 com > > com3 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo > > com3: probed fifo depth: 0 bytes > > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address > > 00:22:68:11:dc:fd > > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 > > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21 > > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22 > > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi > > azalia0: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant CX20561 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20 > > pci1 at ppb0 bus 2 > > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21 > > pci2 at ppb1 bus 3 > > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO > > 3T3R, MoW, address 00:21:6a:11:5a:be > > ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23 > > pci3 at ppb2 bus 5 > > ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 20 > > pci4 at ppb3 bus 13 > > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 > > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 > > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 > > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 > > pci5 at ppb4 bus 21 > > cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16 > > "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured > > sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18 > > sdmmc0 at sdhc0 > > "Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured > > "Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured > > "Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured > > cardslot0 at cbb0 slot 0 flags 0 > > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0 > > pcmcia0 at cardslot0 > > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 > > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 > > scsibus0 at ahci0: 32 targets > > sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500420AS, 0003> SCSI3 0/direct fixed > > naa.5000c5002edad677 > > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > > cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GU10N, MX05> ATAPI 5/cdrom > > removable > > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int > > 23 > > iic0 at ichiic0 > > usb2 at uhci0: USB revision 1.0 > > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb3 at uhci1: USB revision 1.0 > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb4 at uhci2: USB revision 1.0 > > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb5 at uhci3: USB revision 1.0 > > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb6 at uhci4: USB revision 1.0 > > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb7 at uhci5: USB revision 1.0 > > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > pckbc0: using irq 12 for aux slot > > wsmouse0 at pms0 mux 0 > > wsmouse1 at pms0 mux 0 > > pms0: Synaptics touchpad, firmware 7.0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > aps0 at isa0 port 0x1600/31 > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > mtrr: Pentium Pro MTRR support > > scsibus1 at sdmmc0: 2 targets, initiator 0 > > sd1 at scsibus1 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed > > sd1: 15199MB, 512 bytes/sector, 31127552 sectors > > uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics > > Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2 > > video0 at uvideo0 > > ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2 > > ugen1 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with > > Enhanced Data Rate II" rev 2.00/3.99 addr 3 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on sd0a (ec0193beaab07f52.a) swap on sd0b dump on sd0 > > > > > > thanks, > > > > chris. > >
Hi Tomas, Thanks for the response. I connected a usb memory stick to the same usb port I was attempting to connect the external hard drive to and recieved the messages below. This leads me to believe the port is fine and it is the drive/connection is not compatible for some reason. # /var/log/messages openbox /bsd: umass0 at uhub1 openbox /bsd: port 2 configuration 1 interface 0 "SanDisk U3 Cruzer Micro" rev 2.00/0.10 addr 2 openbox /bsd: umass0: using SCSI over Bulk-Only openbox /bsd: scsibus4 at umass0: 2 targets, initiator 0 openbox /bsd: sd2 at scsibus4 targ 1 lun 0: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 0/direct removable openbox /bsd: sd2: 3912MB, 512 bytes/sector, 8013453 sectors openbox /bsd: cd1 at scsibus4 targ 1 lun 1: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 5/cdrom removabl The strange thing is that this drive works fine when connecting to a windows machine, so the drive itself is not faulty. Are there any further diagnostics I can perform to troubleshoot this issue, or should I consider this simply not a compatble device? thanks, chris.