I wouldn't recommend the iwn(4) devices. I've had a bad experience even
with those in the man page.
I recently replaced an iwn(4) with ral(4) and athn(4) as advised on misc
and they've been excellent. No firmware needed for those I tried either.
On May 4, 2012 12:07 AM, "frantisek holop" <min...@obiit.org> wrote:
> hi there,
>
> here is the dmesg for a spanking new acer aspire one D270 netbook.
> installation was easy and fast.
>
> devices not supported (yet):
> intel integrated video,
> BCM4313 (probably gonna replace with an iwn)
>
>
> there is a curious ehci0 timeout..
>
> the 6 cell battery is supposed to give 8h, so would be a nice
> long haul netbook :]
>
>
>
> OpenBSD 5.1-current (GENERIC.MP) #253: Thu Apr 26 01:45:24 MDT 2012
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz ("GenuineIntel" 686-class)
> 1.60 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
> real mem = 1061408768 (1012MB)
> avail mem = 1033216000 (985MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 01/12/12, BIOS32 rev. 0 @ 0xef725,
> SMBIOS rev. 2.7 @ 0xe3e00 (47 entries)
> bios0: vendor Insyde Corp. version "V1.04" date 01/12/2012
> bios0: Acer AOD270
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP HPET APIC MCFG WDRT SLIC BOOT MSDM FPDT SSDT SSDT
> SSDT WDAT
> acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB7(S3)
> PXSX(S4) RP01(S4) PXSX(S4) PXSX(S4) PXSX(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 99MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz ("GenuineIntel" 686-class)
> 1.60 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz ("GenuineIntel" 686-class)
> 1.60 GHz
> cpu2:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz ("GenuineIntel" 686-class)
> 1.60 GHz
> cpu3:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 4
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (RP01)
> acpiprt2 at acpi0: bus 2 (RP02)
> acpiprt3 at acpi0: bus 3 (RP03)
> acpiprt4 at acpi0: bus -1 (RP04)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C2, C1, PSS
> acpicpu1 at acpi0: C2, C1, PSS
> acpicpu2 at acpi0: C2, C1, PSS
> acpicpu3 at acpi0: C2, C1, PSS
> acpitz0 at acpi0: critical temperature is 98 degC
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: SLPB
> acpibtn2 at acpi0: LID_
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT1 model "AL10B31" serial 4136 type LION oem "SANYO"
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD02
> bios0: ROM list: 0xc0000/0xf200!
> cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1400, 1200, 1000, 800,
> 600 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x0bf1 rev
> 0x03
> vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x0be1 rev
> 0x09
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp at vga1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
> azalia0: codecs: Intel/0x2880, Realtek ALC269, using Realtek ALC269
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16
> pci1 at ppb0 bus 1
> re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080),
> apic 4 int 16, address 04:7d:7b:75:00:42
> ukphy0 at re0 phy 7: Generic IEEE 802.3u media interface, rev. 2: OUI
> 0x000732, model 0x0008
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17
> pci2 at ppb1 bus 2
> "Broadcom BCM4313" rev 0x01 at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18
> pci3 at ppb2 bus 3
> "Realtek RTS5209 Card Reader" rev 0x01 at pci3 dev 0 function 0 not
> configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 17
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 19
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 16
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 17
> ehci0: timed out waiting for BIOS
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci4 at ppb3 bus 4
> pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02
> ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI
> 1.1
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD3200BPVT-2, 01.0> SCSI3 0/direct
> fixed naa.50014ee25c01fc0e
> sd0: 305245MB, 512 bytes/sector, 625142448 sectors
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4
> int 19
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x51: 1GB DDR3 SDRAM PC3-10600 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pms0: Synaptics touchpad, firmware 7.2
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> umass0 at uhub0 port 1 configuration 1 interface 0 "SanDisk Corporation U3
> Cruzer Micro" rev 2.00/0.10 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2
> 0/direct removable serial.07815406185E257028F7
> sd1: 3919MB, 512 bytes/sector, 8027789 sectors
> uvideo0 at uhub0 port 3 configuration 1 interface 0 "BRBBM0661 1.3M HD
> WebCam" rev 2.00/3.18 addr 3
> video0 at uvideo0
> uhidev0 at uhub1 port 2 configuration 1 interface 0 "Logitech USB
> Receiver" rev 2.00/12.01 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub1 port 2 configuration 1 interface 1 "Logitech USB
> Receiver" rev 2.00/12.01 addr 2
> uhidev1: iclass 3/1, 8 report ids
> ums0 at uhidev1 reportid 2: 16 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
> uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
> uhidev2 at uhub1 port 2 configuration 1 interface 2 "Logitech USB
> Receiver" rev 2.00/12.01 addr 2
> uhidev2: iclass 3/0, 33 report ids
> uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
> uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
> uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
> uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
> uhidev3 at uhub2 port 2 configuration 1 interface 0 "Areson USB Device"
> rev 1.10/0.01 addr 2
> uhidev3: iclass 3/1
> ums1 at uhidev3: 3 buttons, Z dir
> wsmouse2 at ums1 mux 0
> uhidev4 at uhub2 port 2 configuration 1 interface 1 "Areson USB Device"
> rev 1.10/0.01 addr 2
> uhidev4: iclass 3/0, 1 report id
> uhid7 at uhidev4 reportid 1: input=7, output=7, feature=0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd1a (21380925a4dbb626.a) swap on sd1b dump on sd1b
>
> --
> rom wasn't built in a day.
