On Wed, Oct 26, 2005 at 11:16:31PM -0700, Ted Unangst wrote:
there is a diff from gordon klok in the snapshots that should improve
support for k7 and k8 family powernow (cool and quiet). i'd like to
know where/if it works, what messages get printed, and if hw.setperf
does anything useful. md5 -t with setperf=0 and 100 would be nice.
Changing hw.setperf totally freezes the system. Hardware is a Biostar
iDEQ 220K (VIA VT8237, AMD64 3400).
dmesg follows :
OpenBSD 3.8-current (GENERIC) #210: Tue Oct 25 23:07:20 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 Processor 3400+ ("AuthenticAMD" 686-class, 512KB L2
cache) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
cpu0: AMD Powernow: TS FID VID TTP
cpu0: AMD Cool`n'Quiet K8: 0 available states
real mem = 535273472 (522728K)
avail mem = 481550336 (470264K)
using 4278 buffers containing 26865664 bytes (26236K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c5) BIOS, date 07/27/05, BIOS32 rev. 0 @ 0xf9fa0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc834
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc790/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 3 5 10 12
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA K8M800 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA K8M800 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8M800 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8M400 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8M800 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA K8M800 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
wi0 at pci0 dev 8 function 0 "Intersil PRISM2.5" rev 0x01: irq 5
wi0: PRISM2.5 ISL3874A(Mini-PCI) (0x8013), Firmware 1.1.1 (primary), 1.7.4
(station), address 00:09:5b:41:d8:19
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 11 function 0 not configured
rl0 at pci0 dev 13 function 0 "Realtek 8139" rev 0x10: irq 12, address
00:e0:4c:da:e1:ab
rlphy0 at rl0 phy 0: RTL internal phy
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 10 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <HDS722525VLSA80>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd1 at pciide1 channel 0 drive 0: <IBM-DJNA-371800>
wd1: 16-sector PIO, LBA, 17206MB, 35239680 sectors
wd2 at pciide1 channel 0 drive 1: <IBM-DTLA-307045>
wd2: 16-sector PIO, LBA, 43979MB, 90069840 sectors
wd1(pciide1:0:0): using PIO mode 4, DMA mode 2
wd2(pciide1:0:1): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1612, 1004> SCSI0 5/cdrom
removable
cd0(pciide1:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 3
ac97: codec id 0x414c4760 (Avance Logic ALC655)
audio0 at auvia0
pchb6 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb9 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
uhub5 at uhub0 port 1
uhub5: Texas Instruments TUSB2046 hub, rev 1.10/1.25, addr 2
uhub5: 4 ports with 4 removable, self powered
uhidev0 at uhub5 port 3 configuration 1 interface 0
uhidev0: Justcom Technology USB KVM Switch, rev 1.10/1.00, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 3 configuration 1 interface 1
uhidev1: Justcom Technology USB KVM Switch, rev 1.10/1.00, addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x82
wd1: no disk label
dkcsum: wd1 matches BIOS drive 0x80
dkcsum: wd2 matches BIOS drive 0x81
root on wd2a
rootdev=0x20 rrootdev=0x320 rawdev=0x322
Best regards,
--
Frank - my stupid blog: http://00f.net
L'annuaire des professionnels de la manucure et de la pedicure :
http://www.manucure-pro.com
