Ahoj!
> there is a diff from gordon klok in the snapshots that should improve
> support for k7 and k8 family powernow (cool and quiet). i'd like to
> know where/if it works, what messages get printed, and if hw.setperf
> does anything useful. md5 -t with setperf=0 and 100 would be nice.
I am still not able to use powernow. Using latest (28 Oct 08:21)
snapshot.
$ sysctl hw
hw.machine=i386
hw.model=mobile AMD Athlon(tm) XP-M 2400+ ("AuthenticAMD" 686-class, 512KB L2
cache)
hw.ncpu=1
hw.byteorder=1234
hw.physmem=251174912
hw.usermem=250875904
hw.pagesize=4096
hw.disknames=wd0,cd0
hw.diskcount=2
hw.cpuspeed=1791
Good luck!
With regards
JaSan
dmesg follows:
OpenBSD 3.8-current (GENERIC) #220: Thu Oct 27 20:29:16 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: mobile AMD Athlon(tm) XP-M 2400+ ("AuthenticAMD" 686-class, 512KB L2
cache) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu0: AMD Powernow: TS FID VID
real mem = 251174912 (245288K)
avail mem = 222343168 (217132K)
using 3091 buffers containing 12660736 bytes (12364K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(f5) BIOS, date 08/20/04, BIOS32 rev. 0 @ 0xe8a90
pcibios0 at bios0: rev 2.1 @ 0xe6000/0x695
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe840/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8231 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xe800 0xe0000/0x1800 0xe5000/0x1000! 0xea000/0x5000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8378 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA VT8378 VGA" rev 0x01: aperture at
0x90000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 9 function 0 "ENE CB-1410 CardBus" rev 0x01: irq 11
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 11 function 0 not configured
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23FA-40>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, CDRW/DVD SBW242B, UX51> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 5
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
"VIA VT82C686 Modem" rev 0x80 at pci0 dev 17 function 6 not configured
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 10 address
00:40:d0:58:73:fa
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 8: OUI 0x000008,
model 0x4063
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x40
pcmcia0 at cardslot0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02: HM: not activated WDG: not
activated
npx0 at isa0 port 0xf0/16: using exception 16
biomask efdd netmask efdd ttymask ffdf
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
uaudio0 at uhub0 port 1 configuration 1 interface 0: Creative Technology Ltd SB
Audigy 2 NX, rev 1.10/1.00, addr 2
uaudio_add_selector: NOT IMPLEMENTED
uaudio_add_selector: NOT IMPLEMENTED
uaudio_add_selector: NOT IMPLEMENTED
uaudio0: audio rev 1.00, 28 mixer controls
audio1 at uaudio0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
