I just had this same problem in 3.8. The 6300ESB (at least with my
BIOS) can go into different modes, legacy SATA is what worked for
me. The default was to support the sata drives, plus another 4 PATA
drives. My motherboard also has a stardard PATA chipset on it so I
didn't need the extra drives.
Here's a link to the thread:
http://marc.theaimsgroup.com/?l=openbsd-misc&m=113010956423204&w=2
Le 05-10-25 ` 08:48, SeDoFa a icrit :
Hello,
I tried to install openbsd3.7 on a proliant dl360-g4p.
The dl360 has a "Intel SATA 6300ESB/82801FR"
Unfortunately the install stop after "Proceed with install?". The
error
message is: "No disks found".
At this time, is it possible to install openbsd on proliant dl360 with
Intel SATA 6300ESB/82801FR Controller?
This is the dmesg
OpenBSD 3.7 (RAMDISK_CD) #573: Sun Mar 20 00:27:05 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(TM) CPU 3.40GHz ("GenuineIntel" 686-class) 3.40
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3
6,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,EST,CNXT-ID
real mem = 2147012608 (2096692K)
avail mem = 1954197504 (1908396K)
using 4278 buffers containing 107454464 bytes (104936K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #7 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x3600!
0xcce00/0x1800 0xee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x0c
ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci1 at ppb0 bus 1
ppb1 at pci0 dev 4 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
em0 at pci3 dev 1 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
irq 5, address: 00:11:0a:57:e3:14
em1 at pci3 dev 1 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
irq 5, address: 00:11:0a:57:e3:15
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 4
ppb4 at pci0 dev 6 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci6 at ppb5 bus 6
bge0 at pci6 dev 2 function 0 "Broadcom BCM5704C" rev 0x10, unknown
BCM5704 (0x2100): irq 5 address 00:13:21:ae:a7:f7
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci6 dev 2 function 1 "Broadcom BCM5704C" rev 0x10, unknown
BCM5704 (0x2100): irq 5 address 00:13:21:ae:a7:f6
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
pci7 at ppb6 bus 7
vga1 at pci7 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
vendor "Compaq", unknown product 0xb203 (class system subclass
miscellaneous, rev 0x01) at pci7 dev 4 function 0 not configured
vendor "Compaq", unknown product 0xb204 (class system subclass
miscellaneous, rev 0x01) at pci7 dev 4 function 2 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DW-224E-C, C.8D> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: couldn't map channel 0 cmd regs
pciide1: couldn't map channel 1 cmd regs
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard,
using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ffc5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
Many thanks
Max
