On Wed, Sep 14, 2011 at 7:57 PM, James Wycliffe <james.wycli...@gmail.com> wrote: > Tomas- > > Yes I do! > > Domain /dev/pci0: > B 2:0:0: Attansic Technology L2C > B B B 0x0000: Vendor ID: 1969 Product ID: 2060 > B B B 0x0004: Command: 0007 Status ID: 0010 > B B B 0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: c1 > B B B 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 > B B B 0x0010: BAR mem 64bit addr: 0x00000000d5600000/0x00040000 > B B B 0x0018: BAR io addr: 0x00003000/0x0080 > B B B 0x001c: BAR empty (00000000) > B B B 0x0020: BAR empty (00000000) > B B B 0x0024: BAR empty (00000000) > B B B 0x0028: Cardbus CIS: 00000000 > B B B 0x002c: Subsystem Vendor ID: 1179 Product ID: ff1e > B B B 0x0030: Expansion ROM Base Address: 00000000 > B B B 0x0038: 00000000 > B B B 0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00 > B B B 0x0040: Capability 0x01: Power Management > B B B 0x0048: Capability 0x05: Message Signaled Interrupts (MSI) > B B B 0x0058: Capability 0x10: PCI Express > B B B B B B B B B B Link Speed: 2.5 / 2.5 Gb/s Link Width: x1 / x1 > B B B 0x006c: Capability 0x03: Vital Product Data (VPD) > > Thank you very much, I will try the current.
Probably it will be fine see here http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pci/pcidevs.h?rev=1.1618 and look for 0x2060 which you can see in your output. If not then maybe you have different device which is not in database yet. > > How did you know to check that? I see that now in my dmesg, but considering > the manufacturer calls it Atheros, was it just your familiarity with chipset > manufacturers? No. Just familiarity with their lies in PR materials :-) > > Thanks again > > -jw > > > > > On Wed, Sep 14, 2011 at 12:50 PM, Tomas Bodzar <tomas.bod...@gmail.com> > wrote: >> >> On Wed, Sep 14, 2011 at 6:48 PM, Tomas Bodzar <tomas.bod...@gmail.com> >> wrote: >> > On Wed, Sep 14, 2011 at 6:31 PM, James Wycliffe >> > <james.wycli...@gmail.com> wrote: >> >> Misc: >> >> >> >> I am installing OpenBSD 4.9 i386 on my Toshiba Satellite C655-S5225 >> >> which >> >> has Atheros Wireless and Atheros Ethernet. The wireless is recognized >> >> durring the install process with out any problem and works perfectly. >> >> However the wired ethernet is not working, and the install process does >> >> not >> >> even give me a choice to attempt to configure it. >> >> >> >> I know in the Supported Hardware list >> >> (http://openbsd.org/i386.html#hardware) >> >> Atheros wireless is listed but not ethernet, however I've seen various >> >> "fixes" kicked around for my hardware for OpenBSD and FreeBSD, and both >> >> wireless and ethernet work in de-blobbed fully-free GNU/Linux distros >> >> like >> >> Trisquel. >> >> >> >> Are there any plans to officially support Atheros ethernet hardware? Is >> >> there a generally accepted way of getting this working in 4.9? >> > >> > See alc(4) and ale(4) here >> > >> > http://www.openbsd.org/cgi-bin/man.cgi?query=pci&apropos=0&sektion=4&manpath= OpenBSD+4.9&arch=i386&format=html >> > , but I can't see any of them in your dmesg >> > >> >> >> >> At any rate, attached is my dmesg >> >> >> >> dmesg: >> >> OpenBSD 4.9 (GENERIC) #671: Wed Mar B 2 07:09:00 MST 2011 >> >> B B dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC >> >> cpu0: Pentium(R) Dual-Core CPU T4500 @ 2.30GHz ("GenuineIntel" >> >> 686-class) >> >> 2.30 GHz >> >> cpu0: >> >> >> >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX1 6,xTPR,PDCM,XSAVE >> >> real mem B = 3081773056 (2939MB) >> >> avail mem = 3021234176 (2881MB) >> >> mainbus0 at root >> >> bios0 at mainbus0: AT/286+ BIOS, date 03/18/11, SMBIOS rev. 2.4 @ >> >> 0xe8160 >> >> (35 entries) >> >> bios0: vendor INSYDE version "1.60" date 03/18/2011 >> >> bios0: TOSHIBA Satellite C655 >> >> acpi0 at bios0: rev 2 >> >> acpi0: sleep states S3 S4 S5 >> >> acpi0: tables DSDT FACP HPET APIC MCFG ASF! SLIC BOOT SSDT >> >> acpi0: wakeup devices LID0(S4) P32_(S0) UHC1(S3) UHC2(S3) ECHI(S3) >> >> EXP1(S4) >> >> AZAL(S4) >> >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> >> acpihpet0 at acpi0: 14318179 Hz >> >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> >> cpu0 at mainbus0: apid 0 (boot processor) >> >> cpu0: apic clock running at 199MHz >> >> cpu at mainbus0: not configured >> >> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins >> >> ioapic0: misconfigured as apic 0, remapped to apid 4 >> >> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 >> >> acpiprt0 at acpi0: bus 0 (PCI0) >> >> acpiprt1 at acpi0: bus 4 (P32_) >> >> acpiprt2 at acpi0: bus 2 (EXP1) >> >> acpiprt3 at acpi0: bus 3 (EXP2) >> >> acpiprt4 at acpi0: bus -1 (EXP3) >> >> acpiprt5 at acpi0: bus -1 (EXP4) >> >> acpiprt6 at acpi0: bus 7 (EXP5) >> >> acpiprt7 at acpi0: bus -1 (EXP6) >> >> acpiprt8 at acpi0: bus -1 (PEGP) >> >> acpicpu0 at acpi0: C2, C1, PSS >> >> acpipwrres0 at acpi0: FN00 >> >> acpitz0 at acpi0: critical temperature 114 degC >> >> acpibtn0 at acpi0: PWRB >> >> acpibtn1 at acpi0: LID0 >> >> acpiac0 at acpi0: AC unit offline >> >> acpibat0 at acpi0: BAT0 model "PA381" serial 6719 type Li-ion >> >> acpivideo0 at acpi0: OVGA >> >> acpivideo1 at acpi0: VGA_ >> >> bios0: ROM list: 0xc0000/0xfc00! 0xd0000/0x1000 0xd1000/0x2c00! >> >> cpu0: Enhanced SpeedStep 2295 MHz: speeds: 2300, 1600, 1200 MHz >> >> pci0 at mainbus0 bus 0: configuration mode 1 (bios) >> >> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 >> >> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 >> >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> >> intagp0 at vga1 >> >> agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 >> >> inteldrm0 at vga1: apic 4 int 16 (irq 11) >> >> drm0 at inteldrm0 >> >> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured >> >> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 4 int >> >> 16 >> >> (irq 11) >> >> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 4 int >> >> 21 >> >> (irq 10) >> >> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 4 int >> >> 19 >> >> (irq 11) >> >> ehci0: timed out waiting for BIOS >> >> usb0 at ehci0: USB revision 2.0 >> >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> >> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: >> >> apic 4 >> >> int 22 (irq 11) >> >> azalia0: codecs: Conexant/0x5069 >> >> audio0 at azalia0 >> >> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 4 int >> >> 17 >> >> (irq 5) >> >> pci1 at ppb0 bus 2 >> >> "Attansic Technology L2C" rev 0xc1 at pci1 dev 0 function 0 not >> >> configured >> > >> > maybe this one? >> >> Ah, I was too much quick :-) This one >> >> http://www.openbsd.org/cgi-bin/man.cgi?query=lii&sektion=4&arch=i386&apropos= 0&manpath=OpenBSD+4.9 >> . Can you see something in pcidump -v output regarding this device and >> try current. >> >> > >> >> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 4 int >> >> 16 >> >> (irq 11) >> >> pci2 at ppb1 bus 3 >> >> athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 4 int 17 >> >> (irq >> >> 11) >> >> athn0: AR9285 rev 2 (1T1R), ROM rev 14, address e0:ca:94:12:f9:6f >> >> ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 4 int >> >> 17 >> >> (irq 11) >> >> pci3 at ppb2 bus 7 >> >> uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 4 int >> >> 23 >> >> (irq 11) >> >> uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 4 int >> >> 19 >> >> (irq 11) >> >> uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 4 int >> >> 16 >> >> (irq 11) >> >> uhci5 at pci0 dev 29 function 3 "Intel 82801I USB" rev 0x03: apic 4 int >> >> 18 >> >> (irq 11) >> >> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 4 int >> >> 23 >> >> (irq 11) >> >> ehci1: timed out waiting for BIOS >> > >> > another issue. Do you have latest BIOS and are there some related knobs >> > in BIOS? >> > >> >> usb1 at ehci1: USB revision 2.0 >> >> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> >> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 >> >> pci4 at ppb3 bus 4 >> >> pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03 >> >> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 4 >> >> int 19 >> >> (irq 11), AHCI 1.2 >> >> ahci0: PHY offline on port 0 >> >> scsibus0 at ahci0: 32 targets >> >> sd0 at scsibus0 targ 1 lun 0: <ATA, TOSHIBA MK3275GS, GT00> SCSI3 >> >> 0/direct >> >> fixed >> >> sd0: 305245MB, 512 bytes/sec, 625142448 sec total >> >> cd0 at scsibus0 targ 5 lun 0: <TSSTcorp, CDDVDW TS-L633J, TF02> ATAPI >> >> 5/cdrom removable >> >> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 4 >> >> int >> >> 18 (irq 11) >> >> iic0 at ichiic0 >> >> spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM >> >> spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM >> >> usb2 at uhci0: USB revision 1.0 >> >> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> >> usb3 at uhci1: USB revision 1.0 >> >> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> >> usb4 at uhci2: USB revision 1.0 >> >> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> >> usb5 at uhci3: USB revision 1.0 >> >> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> >> usb6 at uhci4: USB revision 1.0 >> >> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> >> usb7 at uhci5: USB revision 1.0 >> >> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> >> isa0 at pcib0 >> >> isadma0 at isa0 >> >> pckbc0 at isa0 port 0x60/5 >> >> pckbd0 at pckbc0 (kbd slot) >> >> pckbc0: using irq 1 for kbd slot >> >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> >> pms0 at pckbc0 (aux slot) >> >> pckbc0: using irq 12 for aux slot >> >> wsmouse0 at pms0 mux 0 >> >> pcppi0 at isa0 port 0x61 >> >> spkr0 at pcppi0 >> >> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >> >> mtrr: Pentium Pro MTRR support >> >> uvideo0 at uhub0 port 2 configuration 1 interface 0 "Importek TOSHIBA >> >> Web >> >> Camera" rev 2.00/62.07 addr 2 >> >> video0 at uvideo0 >> >> umass0 at uhub0 port 3 configuration 1 interface 0 "Generic USB2.0-CRW" >> >> rev >> >> 2.00/38.82 addr 3 >> >> umass0: using SCSI over Bulk-Only >> >> scsibus1 at umass0: 2 targets, initiator 0 >> >> sd1 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 >> >> 0/direct >> >> removable >> >> sd1: drive offline >> >> umass1 at uhub1 port 3 configuration 1 interface 0 "Verbatim STORE N >> >> GO" rev >> >> 2.00/1.00 addr 2 >> >> umass1: using SCSI over Bulk-Only >> >> scsibus2 at umass1: 2 targets, initiator 0 >> >> sd2 at scsibus2 targ 1 lun 0: <Verbatim, STORE N GO, 5.00> SCSI0 >> >> 0/direct >> >> removable >> >> sd2: 15264MB, 512 bytes/sec, 31260672 sec total >> >> vscsi0 at root >> >> scsibus3 at vscsi0: 256 targets >> >> softraid0 at root >> >> root on sd2a swap on sd2b dump on sd2b >> >> >> >> Thanks >> >> >> > >> > Did you try current? >> > >> >> -jw
