On Wed, Sep 14, 2011 at 6:48 PM, Tomas Bodzar <tomas.bod...@gmail.com> wrote: > On Wed, Sep 14, 2011 at 6:31 PM, James Wycliffe > <james.wycli...@gmail.com> wrote: >> Misc: >> >> I am installing OpenBSD 4.9 i386 on my Toshiba Satellite C655-S5225 which >> has Atheros Wireless and Atheros Ethernet. The wireless is recognized >> durring the install process with out any problem and works perfectly. >> However the wired ethernet is not working, and the install process does not >> even give me a choice to attempt to configure it. >> >> I know in the Supported Hardware list (http://openbsd.org/i386.html#hardware) >> Atheros wireless is listed but not ethernet, however I've seen various >> "fixes" kicked around for my hardware for OpenBSD and FreeBSD, and both >> wireless and ethernet work in de-blobbed fully-free GNU/Linux distros like >> Trisquel. >> >> Are there any plans to officially support Atheros ethernet hardware? Is >> there a generally accepted way of getting this working in 4.9? > > See alc(4) and ale(4) here > http://www.openbsd.org/cgi-bin/man.cgi?query=pci&apropos=0&sektion=4&manpath= OpenBSD+4.9&arch=i386&format=html > , but I can't see any of them in your dmesg > >> >> At any rate, attached is my dmesg >> >> dmesg: >> OpenBSD 4.9 (GENERIC) #671: Wed Mar B 2 07:09:00 MST 2011 >> B B dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC >> cpu0: Pentium(R) Dual-Core CPU T4500 @ 2.30GHz ("GenuineIntel" 686-class) >> 2.30 GHz >> cpu0: >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX1 6,xTPR,PDCM,XSAVE >> real mem B = 3081773056 (2939MB) >> avail mem = 3021234176 (2881MB) >> mainbus0 at root >> bios0 at mainbus0: AT/286+ BIOS, date 03/18/11, SMBIOS rev. 2.4 @ 0xe8160 >> (35 entries) >> bios0: vendor INSYDE version "1.60" date 03/18/2011 >> bios0: TOSHIBA Satellite C655 >> acpi0 at bios0: rev 2 >> acpi0: sleep states S3 S4 S5 >> acpi0: tables DSDT FACP HPET APIC MCFG ASF! SLIC BOOT SSDT >> acpi0: wakeup devices LID0(S4) P32_(S0) UHC1(S3) UHC2(S3) ECHI(S3) EXP1(S4) >> AZAL(S4) >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpihpet0 at acpi0: 14318179 Hz >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: apic clock running at 199MHz >> cpu at mainbus0: not configured >> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins >> ioapic0: misconfigured as apic 0, remapped to apid 4 >> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus 4 (P32_) >> acpiprt2 at acpi0: bus 2 (EXP1) >> acpiprt3 at acpi0: bus 3 (EXP2) >> acpiprt4 at acpi0: bus -1 (EXP3) >> acpiprt5 at acpi0: bus -1 (EXP4) >> acpiprt6 at acpi0: bus 7 (EXP5) >> acpiprt7 at acpi0: bus -1 (EXP6) >> acpiprt8 at acpi0: bus -1 (PEGP) >> acpicpu0 at acpi0: C2, C1, PSS >> acpipwrres0 at acpi0: FN00 >> acpitz0 at acpi0: critical temperature 114 degC >> acpibtn0 at acpi0: PWRB >> acpibtn1 at acpi0: LID0 >> acpiac0 at acpi0: AC unit offline >> acpibat0 at acpi0: BAT0 model "PA381" serial 6719 type Li-ion >> acpivideo0 at acpi0: OVGA >> acpivideo1 at acpi0: VGA_ >> bios0: ROM list: 0xc0000/0xfc00! 0xd0000/0x1000 0xd1000/0x2c00! >> cpu0: Enhanced SpeedStep 2295 MHz: speeds: 2300, 1600, 1200 MHz >> pci0 at mainbus0 bus 0: configuration mode 1 (bios) >> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 >> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> intagp0 at vga1 >> agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 >> inteldrm0 at vga1: apic 4 int 16 (irq 11) >> drm0 at inteldrm0 >> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured >> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 4 int 16 >> (irq 11) >> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 4 int 21 >> (irq 10) >> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 4 int 19 >> (irq 11) >> ehci0: timed out waiting for BIOS >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 4 >> int 22 (irq 11) >> azalia0: codecs: Conexant/0x5069 >> audio0 at azalia0 >> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 4 int 17 >> (irq 5) >> pci1 at ppb0 bus 2 >> "Attansic Technology L2C" rev 0xc1 at pci1 dev 0 function 0 not configured > > maybe this one?
Ah, I was too much quick :-) This one http://www.openbsd.org/cgi-bin/man.cgi?query=lii&sektion=4&arch=i386&apropos= 0&manpath=OpenBSD+4.9 . Can you see something in pcidump -v output regarding this device and try current. > >> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 4 int 16 >> (irq 11) >> pci2 at ppb1 bus 3 >> athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 4 int 17 (irq >> 11) >> athn0: AR9285 rev 2 (1T1R), ROM rev 14, address e0:ca:94:12:f9:6f >> ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 4 int 17 >> (irq 11) >> pci3 at ppb2 bus 7 >> uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 4 int 23 >> (irq 11) >> uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 4 int 19 >> (irq 11) >> uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 4 int 16 >> (irq 11) >> uhci5 at pci0 dev 29 function 3 "Intel 82801I USB" rev 0x03: apic 4 int 18 >> (irq 11) >> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 4 int 23 >> (irq 11) >> ehci1: timed out waiting for BIOS > > another issue. Do you have latest BIOS and are there some related knobs in BIOS? > >> usb1 at ehci1: USB revision 2.0 >> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 >> pci4 at ppb3 bus 4 >> pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03 >> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 4 int 19 >> (irq 11), AHCI 1.2 >> ahci0: PHY offline on port 0 >> scsibus0 at ahci0: 32 targets >> sd0 at scsibus0 targ 1 lun 0: <ATA, TOSHIBA MK3275GS, GT00> SCSI3 0/direct >> fixed >> sd0: 305245MB, 512 bytes/sec, 625142448 sec total >> cd0 at scsibus0 targ 5 lun 0: <TSSTcorp, CDDVDW TS-L633J, TF02> ATAPI >> 5/cdrom removable >> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 4 int >> 18 (irq 11) >> iic0 at ichiic0 >> spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM >> spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM >> usb2 at uhci0: USB revision 1.0 >> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb3 at uhci1: USB revision 1.0 >> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb4 at uhci2: USB revision 1.0 >> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb5 at uhci3: USB revision 1.0 >> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb6 at uhci4: USB revision 1.0 >> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb7 at uhci5: USB revision 1.0 >> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> isa0 at pcib0 >> isadma0 at isa0 >> pckbc0 at isa0 port 0x60/5 >> pckbd0 at pckbc0 (kbd slot) >> pckbc0: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> pms0 at pckbc0 (aux slot) >> pckbc0: using irq 12 for aux slot >> wsmouse0 at pms0 mux 0 >> pcppi0 at isa0 port 0x61 >> spkr0 at pcppi0 >> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >> mtrr: Pentium Pro MTRR support >> uvideo0 at uhub0 port 2 configuration 1 interface 0 "Importek TOSHIBA Web >> Camera" rev 2.00/62.07 addr 2 >> video0 at uvideo0 >> umass0 at uhub0 port 3 configuration 1 interface 0 "Generic USB2.0-CRW" rev >> 2.00/38.82 addr 3 >> umass0: using SCSI over Bulk-Only >> scsibus1 at umass0: 2 targets, initiator 0 >> sd1 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct >> removable >> sd1: drive offline >> umass1 at uhub1 port 3 configuration 1 interface 0 "Verbatim STORE N GO" rev >> 2.00/1.00 addr 2 >> umass1: using SCSI over Bulk-Only >> scsibus2 at umass1: 2 targets, initiator 0 >> sd2 at scsibus2 targ 1 lun 0: <Verbatim, STORE N GO, 5.00> SCSI0 0/direct >> removable >> sd2: 15264MB, 512 bytes/sec, 31260672 sec total >> vscsi0 at root >> scsibus3 at vscsi0: 256 targets >> softraid0 at root >> root on sd2a swap on sd2b dump on sd2b >> >> Thanks >> > > Did you try current? > >> -jw
