Jacob Meuser <jake...@sdf.lonestar.org> wrote:
> On Mon, Feb 28, 2011 at 11:57:20PM +0100, pet...@schwertfisch.de wrote:
> > Hi,
> >
> > using a recent snapshot of 4.9, some USB devices are no longer
> > attached on boot. They used to be detected/attached automatically
> > in OpenBSD 4.8.
> >
> > The dmesg outputs attached below show how my KORG nanokontrol midi
> > controller gets attached in 4.8 but is completely ignored in the
> > recent snapshot.
> >
> > After booting, if I disconnect/reconnect it, the device LED lights
> > up shortly, then turns off again (no console output).
> >
> > If I then connect it to a different port, it gets attached and works
> > normally. Afterwards, when connected to the original port again, it
> > works as well.
>
> can you boot with the following diff and send me the dmesg? this is
> to see if the hub is recognising a device has been inserted.
>
> --
> jake...@sdf.lonestar.org
> SDF Public Access UNIX System - http://sdf.lonestar.org
>
> Index: uhub.c
> ===================================================================
> RCS file: /cvs/src/sys/dev/usb/uhub.c,v
> retrieving revision 1.57
> diff -u -p uhub.c
> --- uhub.c 25 Jan 2011 20:03:36 -0000 1.57
> +++ uhub.c 28 Feb 2011 23:56:37 -0000
> @@ -593,6 +593,8 @@ uhub_intr(usbd_xfer_handle xfer, usbd_private_handle a
> struct uhub_softc *sc = addr;
>
> DPRINTFN(5,("uhub_intr: sc=%p\n", sc));
> + printf("%s: %s: %s\n", __func__, sc->sc_dev.dv_xname,
> + usbd_errstr(status));
> if (status == USBD_STALLED)
> usbd_clear_endpoint_stall_async(sc->sc_ipipe);
> else if (status == USBD_NORMAL_COMPLETION)
The dmesg is included below. Please note that I have built the GENERIC kernel
accidentally, not GENERIC.MP. If needed, I can build that as well and
send the dmesg.
OpenBSD 4.9 (GENERIC) #0: Tue Mar 1 22:34:23 CET 2011
d...@atom.my.domain:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
real mem = 1061449728 (1012MB)
avail mem = 1033953280 (986MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/06/09, SMBIOS rev. 2.6 @ 0xe91f0 (42
entries)
bios0: vendor Intel Corp. version "JT94510H.86A.0025.2009.0306.1639" date
03/06/2009
bios0: Intel Corporation D945GSEJT
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) PEGP(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
EHCI(S3) MC97(S4) P0P1(S4) PS2K(S3) PS2M(S3) UAR1(S3) UAR2(S3) P0P4(S4)
P0P5(S4) P0P6(S4) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 5 (P0P1)
acpiprt3 at acpi0: bus 1 (P0P4)
acpiprt4 at acpi0: bus 2 (P0P5)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: IGD_
acpivout0 at acpivideo0: DD01
acpivout1 at acpivideo0: DD02
acpivout2 at acpivideo0: DD03
acpivout3 at acpivideo0: DD04
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2 int
16 (irq 11)
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
apic 2 int 16 (irq 11), address 00:27:0e:01:8f:99
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
(irq 7)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 10)
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD1600BEVT-00ZCT0>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
(irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0xa00/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhub_intr: uhub0: NORMAL_COMPLETION
mtrr: Pentium Pro MTRR support
uhub_intr: uhub0: NORMAL_COMPLETION
uhub_intr: uhub1: NORMAL_COMPLETION
uhub_intr: uhub1: NORMAL_COMPLETION
uhub_intr: uhub1: NORMAL_COMPLETION
uhub_intr: uhub0: NORMAL_COMPLETION
uhub_intr: uhub2: NORMAL_COMPLETION
uhub_intr: uhub2: NORMAL_COMPLETION
uhub_intr: uhub2: NORMAL_COMPLETION
uhub_intr: uhub2: NORMAL_COMPLETION
uhub_intr: uhub2: NORMAL_COMPLETION
uhidev0 at uhub1 port 1 configuration 1 interface 0 "CHESEN PS2 to USB
Converter" rev 1.10/0.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
uhub_intr: uhub2: NORMAL_COMPLETION
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "CHESEN PS2 to USB
Converter" rev 1.10/0.10 addr 2
uhub_intr: uhub2: NORMAL_COMPLETION
uhidev1: iclass 3/1, 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
