Hi,
using a recent snapshot of 4.9, some USB devices are no longer
attached on boot. They used to be detected/attached automatically
in OpenBSD 4.8.
The dmesg outputs attached below show how my KORG nanokontrol midi
controller gets attached in 4.8 but is completely ignored in the
recent snapshot.
After booting, if I disconnect/reconnect it, the device LED lights
up shortly, then turns off again (no console output).
If I then connect it to a different port, it gets attached and works
normally. Afterwards, when connected to the original port again, it
works as well.
----- DMESG 4.8 -----
OpenBSD 4.8 (GENERIC.MP) #359: Mon Aug 16 09:16:26 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
real mem = 1061449728 (1012MB)
avail mem = 1034100736 (986MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/06/09, SMBIOS rev. 2.6 @ 0xe91f0 (42
entries)
bios0: vendor Intel Corp. version "JT94510H.86A.0025.2009.0306.1639" date
03/06/2009
bios0: Intel Corporation D945GSEJT
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) PEGP(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
EHCI(S3) MC97(S4) P0P1(S4) PS2K(S3) PS2M(S3) UAR1(S3) UAR2(S3) P0P4(S4)
P0P5(S4) P0P6(S4) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 5 (P0P1)
acpiprt3 at acpi0: bus 1 (P0P4)
acpiprt4 at acpi0: bus 2 (P0P5)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: IGD_
acpivout0 at acpivideo0: DD01
acpivout1 at acpivideo0: DD02
acpivout2 at acpivideo0: DD03
acpivout3 at acpivideo0: DD04
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2 int
16 (irq 11)
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
apic 2 int 16 (irq 11), address 00:27:0e:01:8f:99
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
(irq 7)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 10)
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD1600BEVT-00ZCT0>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
(irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0xa00/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 3 configuration 1 interface 0 "SanDisk SDDR-113" rev
2.00/94.12 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SanDisk, SDDR-113, 9412> SCSI0 0/direct removable
sd0: 3774MB, 512 bytes/sec, 7729152 sec total
uhidev0 at uhub1 port 1 configuration 1 interface 0 "CHESEN PS2 to USB
Converter" rev 1.10/0.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "CHESEN PS2 to USB
Converter" rev 1.10/0.10 addr 2
uhidev1: iclass 3/1, 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
umidi0 at uhub2 port 2 configuration 1 interface 0 "KORG INC. nanoKONTROL" rev
1.10/1.00 addr 2
umidi0: (genuine USB-MIDI)
umidi0: out=1, in=1
midi0 at umidi0: <USB MIDI I/F>
----- DMESG 4.9 (snapshot) -----
OpenBSD 4.9 (GENERIC.MP) #785: Fri Feb 18 14:16:01 MST 2011
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
real mem = 1061449728 (1012MB)
avail mem = 1033928704 (986MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/06/09, SMBIOS rev. 2.6 @ 0xe91f0 (42
entries)
bios0: vendor Intel Corp. version "JT94510H.86A.0025.2009.0306.1639" date
03/06/2009
bios0: Intel Corporation D945GSEJT
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) PEGP(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
EHCI(S3) MC97(S4) P0P1(S4) PS2K(S3) PS2M(S3) UAR1(S3) UAR2(S3) P0P4(S4)
P0P5(S4) P0P6(S4) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 5 (P0P1)
acpiprt3 at acpi0: bus 1 (P0P4)
acpiprt4 at acpi0: bus 2 (P0P5)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: IGD_
acpivout0 at acpivideo0: DD01
acpivout1 at acpivideo0: DD02
acpivout2 at acpivideo0: DD03
acpivout3 at acpivideo0: DD04
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2 int
16 (irq 11)
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
apic 2 int 16 (irq 11), address 00:27:0e:01:8f:99
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
(irq 7)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 10)
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD1600BEVT-00ZCT0>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
(irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0xa00/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 3 configuration 1 interface 0 "SanDisk SDDR-113" rev
2.00/94.12 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SanDisk, SDDR-113, 9412> SCSI0 0/direct removable
sd0: 3774MB, 512 bytes/sec, 7729152 sec total
uhidev0 at uhub1 port 1 configuration 1 interface 0 "CHESEN PS2 to USB
Converter" rev 1.10/0.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "CHESEN PS2 to USB
Converter" rev 1.10/0.10 addr 2
uhidev1: iclass 3/1, 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
