On 02/27/2011 10:25 AM, Joe Snikeris wrote:
On Sun, Feb 27, 2011 at 11:07 AM, Nerius Landys<nlan...@gmail.com> wrote:
<snip>
In general people say that Atheros chips are the best supported (use
the ath driver).
Slightly off topic:
Is anyone using a card with an AR5213 chip? I've got a Cisco
AIR-PI21AG-A-K9 that I'd love to use to replace my crappy router, but
my machine freezes while booting when it's plugged in. ath(4)
mentions a bunch of AR5212 cards, but no AR5213 cards.
This is my build.
currently using it as a nat/firewall box.
Was intending to us it as an ap as well.
but, <sigh> obsd does not like my radios.
and have not been motivated enough to get off my ass
and do somthing about it.
OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD"
586-class) 432 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
real mem = 133791744 (127MB)
avail mem = 121712640 (116MB)
<snip>
vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10,
address 00:0d:b9:12:e0:90
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr1 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12,
address 00:0d:b9:12:e0:91
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
ath0 at pci0 dev 12 function 0 "Atheros AR2413" rev 0x01: irq 9
ath0: AR2413 7.8 phy 4.5 rf 5.6, FCC2A*, address 00:80:48:7e:13:be
ath1 at pci0 dev 14 function 0 "Atheros AR2413" rev 0x01: irq 11
ath1: AR2413 7.8 phy 4.5 rf 5.6, FCC2A*, address 00:80:48:7e:14:36
<snip>
So I am still using an old k6-2 400Mhz ps with a ral(4) radio
on 44 that I keep meaning to update.
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD-K6(tm) 3D processor ("AuthenticAMD" 586-class) 451 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem = 267939840 (255MB)
avail mem = 250646528 (239MB)
<snip>
rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:e0:7d:c2:0f:87
rlphy0 at rl0 phy 0: RTL internal PHY
em0 at pci0 dev 11 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: irq
5, address 00:0e:0c:72:80:8a
eso0 at pci0 dev 12 function 0 "ESS SOLO-1 AudioDrive" rev 0x01: ES1946,
irq 11
eso0: mapping Audio 1 DMA using VC I/O space at 0x90c0
audio0 at eso0
opl0 at eso0: model OPL3
midi0 at opl0: <ESO Yamaha OPL3>
mpu at eso0 not configured
isa0 at pcib0
isadma0 at isa0
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "SiS OHCI root hub" rev 1.00/1.00 addr 1
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
biomask f355 netmask f775 ttymask f7ff
mtrr: K6-family MTRR support (2 registers)
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
ral0 at cardbus0 dev 0 function 0 "Ralink RT2560" rev 0x01: irq 12,
address 00:0e:3b:08:45:41
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
works great, I have not tried many radios, but...
all my ral based radios have worked (ral, rum)
none of my ath based radios have bees supported.
and my zyd radio delevered corrupted packets.
