I was following 4.8 stable branch. After kernel compiled successfully
make build has failed with the following:
cc: unrecognized option '-I/usr/src/lib/libc/include'
cc: unrecognized option '-DAPIWARN'
cc: unrecognized option '-DYP'
cc: unrecognized option '-I/usr/src/lib/libc/yp'
cc: unrecognized option '-D__DBINTERFACE_PRIVATE'
cc: unrecognized option '-I/usr/src/lib/libc'
cc: unrecognized option '-I/usr/src/lib/libc/gdtoa'
cc: unrecognized option '-I/usr/src/lib/libc/arch/i386/gdtoa'
cc: unrecognized option '-DINFNAN_CHECK'
cc: unrecognized option '-DMULTIPLE_THREADS'
cc: unrecognized option '-DNO_FENV_H'
cc: unrecognized option '-DUSE_LOCALE'
cc: unrecognized option '-I/usr/src/lib/libc'
cc: unrecognized option '-I/usr/src/lib/libc/citrus'
cc: unrecognized option '-DRESOLVSORT'
cc: unrecognized option '-DPOSIX_MISTAKE'
cc: unrecognized option '-DFLOATING_POINT'
cc: unrecognized option '-DNLS'
===> libcompat
mkdep -a /usr/src/lib/libcompat/4.1/gtty.c
/usr/src/lib/libcompat/4.1/ftime.c /usr/src/lib/libcompat/4.1/stty.c
/usr/src/lib/libcompat/4.3/regex.c /usr/src/lib/libcompat/4.3/rexec.c
/usr/src/lib/libcompat/4.3/setrgid.c
/usr/src/lib/libcompat/4.3/setruid.c
/usr/src/lib/libcompat/4.4/cuserid.c
/usr/src/lib/libcompat/regexp/regerror.c
/usr/src/lib/libcompat/regexp/regexp.c
/usr/src/lib/libcompat/regexp/regsub.c
===> libcurses
/usr/bin/awk -f /usr/src/lib/libcurses/tinfo/MKnames.awk
/usr/src/lib/libcurses/Caps > names.c
/usr/bin/awk -f /usr/src/lib/libcurses/tinfo/MKcodes.awk bigstrings=1
/usr/src/lib/libcurses/Caps > codes.c
touch stamp_namebuild
cc -O2 -pipe -g -I. -I/usr/src/lib/libcurses -I.
-I/usr/src/lib/libcurses -g -o make_keys
/usr/src/lib/libcurses/tinfo/make_keys.c
cc: unrecognized option '-O2'
cc: unrecognized option '-g'
cc: unrecognized option '-I.'
cc: unrecognized option '-I/usr/src/lib/libcurses'
cc: unrecognized option '-I.'
cc: unrecognized option '-I/usr/src/lib/libcurses'
cc: unrecognized option '-g'
Here's dmesg:
x...@xxx.xxx.xx:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem = 1073102848 (1023MB)
avail mem = 1045590016 (997MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/30/06, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xfc670 (66 entries)
bios0: vendor Intel Corporation version
"SE7320VP21.86B.P.09.00.0042.063020061032" date 06/30/2006
bios0: Intel SEP7320VP2D2
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB
acpi0: wakeup devices P0P1(S5) P0P2(S5) P0P3(S5) P0P4(S5) P0P5(S5)
USB1(S1) USB2(S1) WDTR(S1) EUSB(S1) PS2K(S1) PS2M(S1) UAR1(S5) UAR2(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 3 pa 0xfec10000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 2 (P0P2)
acpiprt3 at acpi0: bus 3 (P0P4)
acpiprt4 at acpi0: bus 4 (P0P5)
acpicpu0 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel E7320 Host" rev 0x0c
"Intel E7320 Error Reporting" rev 0x0c at pci0 dev 0 function 1 not
configured
ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c
pci1 at ppb0 bus 1
ppb1 at pci0 dev 3 function 0 "Intel E7520 PCIE" rev 0x0c
pci2 at ppb1 bus 2
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8050" rev 0x18, Yukon-2
EC rev. A3 (0x2): apic 2 int 16 (irq 10)
msk0 at mskc0 port A: address 00:0e:0c:3c:e2:2a
eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
ppb2 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci3 at ppb2 bus 3
twe0 at pci3 dev 3 function 0 "3ware 7000/8000 series RAID" rev 0x01:
apic 3 int 0 (irq 7)
twe0: Escalade V1.3
scsibus0 at twe0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <3WARE, Host drive #00, > SCSI2 0/direct fixed
sd0: 76318MB, 512 bytes/sec, 156299440 sec total
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: apic 2 int
16 (irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: apic 2 int
19 (irq 9)
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: apic 2 int
23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a
pci4 at ppb3 bus 4
vga1 at pci4 dev 2 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci4 dev 3 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic
2 int 17 (irq 6), address 00:0e:0c:3c:e2:2b
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 18 (irq 5) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 6V300F0>
wd0: 16-sector PIO, LBA48, 286188MB, 586114704 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 6300ESB SMBus" rev 0x02: apic 2
int 17 (irq 6)
iic0 at ichiic0
spdmem0 at iic0 addr 0x53: 512MB DDR2 SDRAM registered ECC PC2-3200CL3
spdmem1 at iic0 addr 0x57: 512MB DDR2 SDRAM registered ECC PC2-3200CL3
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
