I would check to make sure the nic is negotiating properly. It might
be half duplex instead of full or something flakey etc. Check the
output of ifconfig.
Joe
On 9/19/05, Vinicius Pavanelli Vianna <[EMAIL PROTECTED]> wrote:
> Hi,
> Thanks for the held Jared,
>
> I tried to disable pf (pfctl -d) and it continues to loss packets, i
> changed the rules to use state on all and raised the limit on it to
> about 300.000, so i think this is not a problem, and since pfctl -d
> didn't resolve the packet lost i begin to suspect something on the
> bridge code, as i don't see any error on the interface.
> The count on in and out are different because the pf is blocking some
> packets but the big problem is that some packets doesn't get even on the
> interface, my setup is like "add em0 add em1 up" on bridgename.bridge0
> and "up" on the ifs, i also enabled STP as my ISP told me it would help
> their redundancy.
>
> It happens to loss all kinds of packet, from now i detected on icmp and
> tcp with hping, any help on how to trace better this problem?
>
> Thanks, in advance,
>
> To who might interest, bellow is my dmesg
>
> $ dmesg
> OpenBSD 3.7 (GENERIC.MP) #50: Sun Mar 20 00:17:19 MST 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> real mem = 2146459648 (2096152K)
> avail mem = 1952657408 (1906892K)
> using 4278 buffers containing 107425792 bytes (104908K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 05/31/04, BIOS32 rev. 0 @ 0xfd6e0
> pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde80/352 (20 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #5 is the last bus
> bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000
> 0xd2000/0x1000 0xd3000/0x4800
> mainbus0: Intel MP Specification (Version 1.4) ( PLACER CRB )
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 133 MHz
> cpu1 at mainbus0: apid 6 (application processor)
> cpu1: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> cpu2 at mainbus0: apid 1 (application processor)
> cpu2: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
> cpu2:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> cpu3 at mainbus0: apid 7 (application processor)
> cpu3: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
> cpu3:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> mainbus0: bus 0 is type PCI
> mainbus0: bus 1 is type PCI
> mainbus0: bus 2 is type PCI
> mainbus0: bus 3 is type PCI
> mainbus0: bus 4 is type PCI
> mainbus0: bus 5 is type PCI
> mainbus0: bus 6 is type ISA
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0: apid 3 pa 0xfec80000, version 20, 24 pins
> ioapic2 at mainbus0: apid 4 pa 0xfec80100, version 20, 24 pins
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7505 MCH Host" rev 0x03
> vendor "Intel", unknown product 0x2551 (class undefined unknown subclass
> 0x00, rev 0x03) at pci0 dev 0 function 1 not configured
> ppb0 at pci0 dev 1 function 0 "Intel E7505 MCH AGP" rev 0x03
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 2 function 0 "Intel E7505 MCH PCI-PCI" rev 0x03
> pci2 at ppb1 bus 2
> "Intel P64H2 IOxAPIC" rev 0x04 at pci2 dev 28 function 0 not configured
> ppb2 at pci2 dev 29 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
> pci3 at ppb2 bus 3
> em0 at pci3 dev 3 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
> apic 4 int 6 (irq 11), address: 00:30:48:72:95:1a
> em1 at pci3 dev 3 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
> apic 4 int 7 (irq 11), address: 00:30:48:72:95:1b
> "Intel P64H2 IOxAPIC" rev 0x04 at pci2 dev 30 function 0 not configured
> ppb3 at pci2 dev 31 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
> pci4 at ppb3 bus 4
> pciide0 at pci4 dev 3 function 0 "CMD Technology SiI3112 SATA" rev 0x02: DMA
> pciide0: using apic 3 int 2 (irq 11) for native-PCI interrupt
> pciide0: port 0: device present, speed: 1.5Gb/s
> wd0 at pciide0 channel 0 drive 0: <WDC WD360GD-00FNA0>
> wd0: 16-sector PIO, LBA48, 35304MB, 72303840 sectors
> wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
> pciide0: port 1: device present, speed: 1.5Gb/s
> wd1 at pciide0 channel 1 drive 0: <WDC WD360GD-00FNA0>
> wd1: 16-sector PIO, LBA48, 35304MB, 72303840 sectors
> wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2 int
> 16 (irq 11)
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: apic 2 int
> 19 (irq 10)
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: apic 2 int
> 18 (irq 5)
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int
> 23 (irq 11)
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
> usb3 at ehci0: USB revision 2.0
> uhub3 at usb3
> uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub3: single transaction translator
> uhub3: 6 ports with 6 removable, self powered
> ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
> pci5 at ppb4 bus 5
> vga1 at pci5 dev 1 function 0 vendor "SIS", unknown product 0x0325 rev
> 0x00: aperture at 0xe0000000, size 0x400000
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> rl0 at pci5 dev 2 function 0 "Realtek 8139" rev 0x10: apic 2 int 17 (irq
> 12) address 00:08:54:2a:ee:26
> rlphy0 at rl0 phy 0: RTL internal phy
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
> pciide1 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> pciide1: channel 0 disabled (no drives)
> pciide1: channel 1 disabled (no drives)
> "Intel 82801DB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
> wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> lm0 at isa0 port 0x290/8: W83627HF
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask 0 netmask 0 ttymask 0
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matched BIOS disk 80
> dkcsum: warning: dup BSD->BIOS disk mapping
> dkcsum: wd1 had no matching BIOS disk
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
